|
|
Número de pieza | ATM0430D19A | |
Descripción | LIQUID CRYSTAL DISPLAY | |
Fabricantes | AZ Displays | |
Logotipo | ||
Hay una vista previa y un enlace de descarga de ATM0430D19A (archivo pdf) en la parte inferior de esta página. Total 18 Páginas | ||
No Preview Available ! AZ DISPLAYS
SPECIFICATIONS FOR
LIQUID CRYSTAL DISPLAY
CUSTOMER APPROVAL
※ PART NO. : ATM0430D19A (AZ DISPLAYS) VER3.0
APPROVAL
COMPANY
CHOP
SKYDROP
CUSTOMER
COMMENTS
AZ DISPLAYS ENGINEERING APPROVAL
DESIGNED BY
CHECKED BY
APPROVED BY
SUNHB
1 page ATM0430D19A(AZ DISPLAYS) TFT MODULE V4.0
2. PIN ASSIGNMENT
TFT LCD Panel Driving Section
FPC Connector is used for the module electronics interface. The recommended model is
“FH19SC-45S-0.5SH" manufactured by Hirose.
Pin No.
Symbol
Function
Level
Note
1~2 GND
Ground
--
3 VDD
Power supply
--
4 /RESET
Reset pin
I
5~12
R0~R7
Red data
I
13~20
G0~G7
Green data
I
21~28
B0~B7
Blue data
I
29 PCLK
Clock for Input Data
30 DISP
Display On/Off
I
31 HSYNC
Horizontal sync
I
32 VSYNC
Vertical sync
I
33
34
35
36
37
38
39
40~43
DE
UD
LR
/CS
SCL
SDI
SDO
NC
Data enable
Shift direction selection signal
(UD=H: Up-->Down, UD=L: Down-
->Up)
Scan direction selection signal
(LR=H: Left-->Right, LR=L: Right--
>Left)
Chip select pin of serial interface.
Leave it OPEN when not used.
Serial clock input pin. Leave it
OPEN when not used.
Serial input signal. Leave it OPEN
when not used.
Serial output signal. Leave it
OPEN when not used.
No connection
I
I
I
I
I
I
O
--
44
K
Power for LED backlight(Cathode)
--
45
A
Power for LED backlight(Anode)
--
I: input, O: output, P: Power
AZ DISPLAYS
4
5 Page ATM0430D19A(AZ DISPLAYS) TFT MODULE V4.0
5. RELIABILITY TEST
Item
High temperature
storage
Low temperature
storage
High temperature
operation
Low temperature
operation
High temperature/High
humidity operation
Thermal Shock
Vibration test
Package drop test
Test Condition Item
Ta= 70 ºC 120hrs
Ta=-20 ºC 120hrs
Ts= 60 ºC 120hrs
Ts=-10 ºC 120hrs
90% RH 60ºC 120hrs
-10℃/60 min ~ +60℃/60 min for a total 32
cycles, Start with cold temperature and end
with high temperature.
Freq:50Hz
Amplitude:2cm
30 mins for each direction of X,Y,Z
(1.5 hours for total)
Height:60 cm
1 corner, 3 edges, 6 surfaces
Remark
Note 1
Note 4
Note 1
Note 4
Note 2
Note 4
Note 1
Note 4
Note 4
Note 4
Note 1: Ta is the ambient temperature of samples.
Note 2: Ts is the temperature of panel’s surface.
Note 3: In the standard condition, there shall be no practical problem that may affect the
display function. After the reliability test, the product only guarantees operation,
but don’t guarantee all of the cosmetic specification.
Note 4: Before cosmetic and function test, the product must have enough recovery time, at least 2 hours
at room temperature.
AZ DISPLAYS
10
11 Page |
Páginas | Total 18 Páginas | |
PDF Descargar | [ Datasheet ATM0430D19A.PDF ] |
Número de pieza | Descripción | Fabricantes |
ATM0430D19A | LIQUID CRYSTAL DISPLAY | AZ Displays |
ATM0430D19A-T | LCD | AZ Displays |
Número de pieza | Descripción | Fabricantes |
SLA6805M | High Voltage 3 phase Motor Driver IC. |
Sanken |
SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
Analog Devices |
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |