|
|
Número de pieza | DMC16117A | |
Descripción | LCD Module | |
Fabricantes | Optrex | |
Logotipo | ||
Hay una vista previa y un enlace de descarga de DMC16117A (archivo pdf) en la parte inferior de esta página. Total 15 Páginas | ||
No Preview Available ! LCD Module Specification
Type No. DMC16117A
First Edition
Mar 30, 1998
Final Revision
*******
Approved by
Checked by
Checked by
Prepared by
Production Div.
Quality Assurance Div.
Design Engineering Div.
Production Div.
Table of Contents
1. General Specifications .............................................................................2
2. Electrical Specifications...........................................................................3
3. Optical Specifications ..............................................................................6
4. I/O Terminal.............................................................................................8
5. Test..........................................................................................................10
6. Appearance Standards............................................................................11
7. Code System of Production Lot ..........................................................14
8. Type Number .........................................................................................14
9. Applying Precautions .............................................................................14
10. Handling Precautions .............................................................................15
Rev. Date
Revision History
Page
Comment
DMC16117A (AA) No.98-0050
OPTREX CORPORATION
OPTREX
Page 1/15
1 page 2.4.Power Supply ON/OFF Sequence
2.4.1.ON Sequence
SIGNAL
VCC
SIGNAL
0≦t
0≦t
VEE
LEVEL
VCC
VSS
VCC
VSS
VCC
VSS
VEE
2.4.2.OFF Sequence
LEVEL
VCC
VSS
VCC
VSS
VCC
VSS
VEE
0≦t
0≦t
SIGNAL
VCC
SIGNAL
VEE
Please maintain the above sequence when turning on and off the power supply of the module.
If VEE is supplied to the module while internal alternate signal for LCD driving (M) is unstable,
DC component will be supplied to the LCD panel. This may cause damage the LCD module.
DMC16117A (AA) No.98-0050
OPTREX CORPORATION
OPTREX
Page 5/15
5 Page 6.Appearance Standards
6.1.Inspection conditions
The LCD shall be inspected under 40W white fluorescent light.
The distance between the eyes and the sample shall be more than 30cm.
All directions for inspecting the sample should be within 45゚against perpendicular line.
45゚
6.2.Definition of applicable Zones
A Zone
B Zone
C Zone
Bezel Flame
A Zone : Active display area
B Zone : Area from outside of "A Zone" to validity viewing area
C Zone : Rest parts
A Zone + B Zone = Validity viewing area
DMC16117A (AA) No.98-0050
OPTREX CORPORATION
OPTREX
Page 11/15
11 Page |
Páginas | Total 15 Páginas | |
PDF Descargar | [ Datasheet DMC16117A.PDF ] |
Número de pieza | Descripción | Fabricantes |
DMC16117A | LCD Module | Optrex |
Número de pieza | Descripción | Fabricantes |
SLA6805M | High Voltage 3 phase Motor Driver IC. |
Sanken |
SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
Analog Devices |
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |