Datenblatt-pdf.com


PBSS9110D Schematic ( PDF Datasheet ) - NXP Semiconductors

Teilenummer PBSS9110D
Beschreibung PNP transistor
Hersteller NXP Semiconductors
Logo NXP Semiconductors Logo 




Gesamt 13 Seiten
PBSS9110D Datasheet, Funktion
PBSS9110D
100 V, 1 A PNP low VCEsat (BISS) transistor
Rev. 03 — 22 November 2009
Product data sheet
1. Product profile
1.1 General description
PNP low VCEsat Breakthrough In Small Signal (BISS) transistor in a SOT457 (SC-74)
small Surface-Mounted Device (SMD) plastic package.
NPN complement: PBSS8110D.
1.2 Features
„ Low collector-emitter saturation voltage VCEsat
„ High collector current capability IC and ICM
„ High collector current gain (hFE) at high IC
„ High efficiency due to less heat generation
„ Smaller required Printed-Circuit Board (PCB) area than for conventional transistors
1.3 Applications
„ High-voltage DC-to-DC conversion
„ High-voltage MOSFET gate driving
„ High-voltage motor control
„ High-voltage power switches (e.g. motors, fans)
„ Automotive applications
1.4 Quick reference data
Table 1. Quick reference data
Symbol Parameter
VCEO collector-emitter voltage
IC collector current
ICM peak collector current
RCEsat collector-emitter
saturation resistance
[1] Pulse test: tp 300 μs; δ ≤ 0.02.
Conditions
open base
single pulse;
tp 1 ms
IC = 1 A;
IB = 100 mA
Min Typ Max
Unit
- - 100 V
- - 1 A
- - 3 A
[1] -
170 320
mΩ






PBSS9110D Datasheet, Funktion
NXP Semiconductors
PBSS9110D
100 V, 1 A PNP low VCEsat (BISS) transistor
600
hFE
400
200
001aaa376
(1)
(2)
(3)
0
101
1
10
102
103
104
IC (mA)
VCE = 10 V
(1) Tamb = 100 °C
(2) Tamb = 25 °C
(3) Tamb = 55 °C
Fig 4. DC current gain as a function of collector
current; typical values
1.2
VBE
(V)
0.8
0.4
001aaa377
(1)
(2)
(3)
2
IC
(A)
1.6
IB (mA) = 45
40.5
36
31.5
27
1.2
001aaa384
0.8 22.5
18
13.5
9
0.4 4.5
0
0 1 2 3 4 5
VCE (V)
Tamb = 25 °C
Fig 5. Collector current as a function of
collector-emitter voltage; typical values
10 001aaa381
VBEsat
(V)
1 (1)
(2)
(3)
0
101
1
10
102
103
104
IC (mA)
101
101
1
10
102
103
104
IC (mA)
VCE = 10 V
(1) Tamb = 55 °C
(2) Tamb = 25 °C
(3) Tamb = 100 °C
Fig 6. Base-emitter voltage as a function of collector
current; typical values
IC/IB = 10
(1) Tamb = 55 °C
(2) Tamb = 25 °C
(3) Tamb = 100 °C
Fig 7. Base-emitter saturation voltage as a function
of collector current; typical values
PBSS9110D_3
Product data sheet
Rev. 03 — 22 November 2009
© NXP B.V. 2009. All rights reserved.
6 of 13

6 Page









PBSS9110D pdf, datenblatt
NXP Semiconductors
PBSS9110D
100 V, 1 A PNP low VCEsat (BISS) transistor
13. Legal information
13.1 Data sheet status
Document status[1][2]
Objective [short] data sheet
Preliminary [short] data sheet
Product [short] data sheet
Product status[3]
Development
Qualification
Production
Definition
This document contains data from the objective specification for product development.
This document contains data from the preliminary specification.
This document contains the product specification.
[1] Please consult the most recently issued document before initiating or completing a design.
[2] The term ‘short data sheet’ is explained in section “Definitions”.
[3] The product status of device(s) described in this document may have changed since this document was published and may differ in case of multiple devices. The latest product status
information is available on the Internet at URL http://www.nxp.com.
13.2 Definitions
Draft — The document is a draft version only. The content is still under
internal review and subject to formal approval, which may result in
modifications or additions. NXP Semiconductors does not give any
representations or warranties as to the accuracy or completeness of
information included herein and shall have no liability for the consequences of
use of such information.
Short data sheet — A short data sheet is an extract from a full data sheet
with the same product type number(s) and title. A short data sheet is intended
for quick reference only and should not be relied upon to contain detailed and
full information. For detailed and full information see the relevant full data
sheet, which is available on request via the local NXP Semiconductors sales
office. In case of any inconsistency or conflict with the short data sheet, the
full data sheet shall prevail.
13.3 Disclaimers
General — Information in this document is believed to be accurate and
reliable. However, NXP Semiconductors does not give any representations or
warranties, expressed or implied, as to the accuracy or completeness of such
information and shall have no liability for the consequences of use of such
information.
Right to make changes — NXP Semiconductors reserves the right to make
changes to information published in this document, including without
limitation specifications and product descriptions, at any time and without
notice. This document supersedes and replaces all information supplied prior
to the publication hereof.
Suitability for use — NXP Semiconductors products are not designed,
authorized or warranted to be suitable for use in medical, military, aircraft,
space or life support equipment, nor in applications where failure or
malfunction of an NXP Semiconductors product can reasonably be expected
to result in personal injury, death or severe property or environmental
damage. NXP Semiconductors accepts no liability for inclusion and/or use of
NXP Semiconductors products in such equipment or applications and
therefore such inclusion and/or use is at the customer’s own risk.
Applications — Applications that are described herein for any of these
products are for illustrative purposes only. NXP Semiconductors makes no
representation or warranty that such applications will be suitable for the
specified use without further testing or modification.
Limiting values — Stress above one or more limiting values (as defined in
the Absolute Maximum Ratings System of IEC 60134) may cause permanent
damage to the device. Limiting values are stress ratings only and operation of
the device at these or any other conditions above those given in the
Characteristics sections of this document is not implied. Exposure to limiting
values for extended periods may affect device reliability.
Terms and conditions of sale — NXP Semiconductors products are sold
subject to the general terms and conditions of commercial sale, as published
at http://www.nxp.com/profile/terms, including those pertaining to warranty,
intellectual property rights infringement and limitation of liability, unless
explicitly otherwise agreed to in writing by NXP Semiconductors. In case of
any inconsistency or conflict between information in this document and such
terms and conditions, the latter will prevail.
No offer to sell or license — Nothing in this document may be interpreted or
construed as an offer to sell products that is open for acceptance or the grant,
conveyance or implication of any license under any copyrights, patents or
other industrial or intellectual property rights.
Export control — This document as well as the item(s) described herein
may be subject to export control regulations. Export might require a prior
authorization from national authorities.
Quick reference data — The Quick reference data is an extract of the
product data given in the Limiting values and Characteristics sections of this
document, and as such is not complete, exhaustive or legally binding.
13.4 Trademarks
Notice: All referenced brands, product names, service names and trademarks
are the property of their respective owners.
14. Contact information
For more information, please visit: http://www.nxp.com
For sales office addresses, please send an email to: [email protected]
PBSS9110D_3
Product data sheet
Rev. 03 — 22 November 2009
© NXP B.V. 2009. All rights reserved.
12 of 13

12 Page





SeitenGesamt 13 Seiten
PDF Download[ PBSS9110D Schematic.PDF ]

Link teilen




Besondere Datenblatt

TeilenummerBeschreibungHersteller
PBSS9110AS1A PNP low VCEsat (BISS) transistorNXP Semiconductors
NXP Semiconductors
PBSS9110DPNP transistorNXP Semiconductors
NXP Semiconductors
PBSS9110TPNP low VCEsat (BISS) transistorNXP Semiconductors
NXP Semiconductors
PBSS9110XPNP low VCEsat (BISS) transistorNXP Semiconductors
NXP Semiconductors
PBSS9110YPNP low VCEsat (BISS) transistorNXP Semiconductors
NXP Semiconductors

TeilenummerBeschreibungHersteller
CD40175BC

Hex D-Type Flip-Flop / Quad D-Type Flip-Flop.

Fairchild Semiconductor
Fairchild Semiconductor
KTD1146

EPITAXIAL PLANAR NPN TRANSISTOR.

KEC
KEC


www.Datenblatt-PDF.com       |      2020       |      Kontakt     |      Suche