Datenblatt-pdf.com


DF2B6M4SL Schematic ( PDF Datasheet ) - Toshiba Semiconductor

Teilenummer DF2B6M4SL
Beschreibung Diode ( Rectifier )
Hersteller Toshiba Semiconductor
Logo Toshiba Semiconductor Logo 




Gesamt 8 Seiten
DF2B6M4SL Datasheet, Funktion
TOSHIBA Diodes for Protecting against ESD
DF2B6M4SL
Application
- ESD Protection
Note: This product is designed for protection against electrostatic discharge
(ESD) and is not intended for any other purpose, including, but not limited to,
voltage regulation.
Abusolute Maximum Ratings (Ta = 25°C)
DF2B6M4SL
Characteristic
Symbol
Rating
Unit
Electrostatic discharge voltage
IEC61000-4-2(Contact)
IEC61000-4-2(Air)
Peak pulse power ( tp = 8 / 20 s )
Maximum peak pulse current ( tp = 8 / 20 s )
VESD
(Note 1)
PPK
IPP
(Note 2)
± 23
± 25
30
2
kV
W
A
Junction temperature
Tj 150 C
Storage temperature range
Note1 : according to IEC61000-4-2
Tstg 55 to 150 C
SL2
Note2 : according to IEC61000-4-5
Note3:Using continuously under heavy loads (e.g. the application of high JEDEC
temperature/current/voltage and the significant change in temperature, etc.)
may cause this product to decrease in the reliability significantly even if the
operating conditions (i.e. operating temperature/current/voltage, etc.) are
within the absolute maximum ratings.Please design the appropriate reliability
upon reviewing the Toshiba Semiconductor Reliability Handbook (“Handling
JEITA
TOSHIBA
Weight: 0.2 mg (typ.)
Precautions”/ “Derating Concept and Methods”) and individual reliability data
(i.e. reliability test report and estimated failure rate, etc).
1:Pin1
2:Pin2
Electrical Characteristics (Ta = 25°C)
VRWM : Working peak reverse voltage
VBR : Reverse breakdown voltage
IBR : Reverse breakdown current
IR : Reverse Current
VC : Clamping Voltage
IPP : Peak pulse current
RDYN : Dynamic resistance
1 2015-09-29






DF2B6M4SL Datasheet, Funktion
DF2B6M4SL
ESD Clamp Waveform (IEC61000-4-2) (Note)
+8kV contact ESD
140
120
100
80
VCL-max- peak = 104 V
VCL-30ns-peak = 21 V
VCL-60ns-peak = 12 V
60
40
20
0
-20
-10 0 10 20 30 40 50 60 70 80 90
t (ns)
-8kV contact ESD
20
0
-20
-40
-60
-80
-100
-120
-140
-10
0 10
VCL-max- peak = -100 V
VCL-30ns-peak = -20 V
VCL-60ns-peak = -12 V
20 30 40 50 60 70 80 90
t (ns)
+15kV contact ESD
350
300
VCL-max- peak = 140 V
250
200
VCL-30ns-peak = 35 V
VCL-60ns-peak = 26 V
150
100
50
0
-50
-10 0 10 20 30 40 50 60 70 80 90
t (ns)
-15kV contact ESD
50
0
-50
-100
-150
-200
-250
-300
-350
-10
0 10
VCL-max- peak = -150 V
VCL-30ns-peak = -32 V
VCL-60ns-peak = -18 V
20 30 40 50 60 70 80 90
t (ns)
Fig. IEC61000-4-2 (Contact)
Note: The above characteristics curves are presented for reference only and not guaranteed by production test,
unless otherwise noted.
6 2015-09-29

6 Page







SeitenGesamt 8 Seiten
PDF Download[ DF2B6M4SL Schematic.PDF ]

Link teilen




Besondere Datenblatt

TeilenummerBeschreibungHersteller
DF2B6M4SLDiode ( Rectifier )Toshiba Semiconductor
Toshiba Semiconductor

TeilenummerBeschreibungHersteller
CD40175BC

Hex D-Type Flip-Flop / Quad D-Type Flip-Flop.

Fairchild Semiconductor
Fairchild Semiconductor
KTD1146

EPITAXIAL PLANAR NPN TRANSISTOR.

KEC
KEC


www.Datenblatt-PDF.com       |      2020       |      Kontakt     |      Suche