DataSheet.es    


PDF CHM2179B98F Data sheet ( Hoja de datos )

Número de pieza CHM2179B98F
Descripción GaAs Monolithic Microwave IC
Fabricantes United Monolithic Semiconductors 
Logotipo United Monolithic Semiconductors Logotipo



Hay una vista previa y un enlace de descarga de CHM2179B98F (archivo pdf) en la parte inferior de esta página.


Total 8 Páginas

No Preview Available ! CHM2179B98F Hoja de datos, Descripción, Manual

CHM2179b98F
W-band Mixer
GaAs Monolithic Microwave IC
Description
The CHM2179b98F is a monolithic single
channel mixer, which integrates high quality
Schottky diodes that produces low
conversion loss and very low 1/f noise.
The circuit is designed for sensors system at
W-band, such as automotive long range
radar and industrial sensors.
The circuit is manufactured with a Schottky
diode MMIC process, 1µm gate length, via
holes through the substrate, air bridges and
stepper lithography.
It is available in chip form.
LO
IF
Main Features
W-band LO and RF frequency range
Low conversion loss
IF from DC to >100MHz
High LO/RF isolation
High LO/AM Noise rejection
Very low IF noise
Low LO input power
Automatic assembled oriented
BCB layer protection
Small chip size 1.53 x 1.17 x 0.10mm
RF
Main Electrical Characteristics
Tamb.= +25°C
Symbol
Parameter
F_lo, F_rf LO, RF frequency
F_if IF frequency range
Lc Conversion loss
l_lo/rf LO/RF isolation
N_if IF noise @ 100kHz
Min
76
[DC;100]
Typ
8
22
-162
Max
79
Unit
GHz
MHz
dB
dB
dBm/Hz
Ref. : DSCHM2179b98F3246 - 03 Sep 13
1/8 Specifications subject to change without notice
United Monolithic Semiconductors S.A.S.
Bât. Charmille - Parc SILIC - 10, Avenue du Québec - 91140 VILLEBON-SUR-YVETTE - France
Tel.: +33 (0) 1 69 86 32 00 - Fax: +33 (0) 1 69 86 34 34

1 page




CHM2179B98F pdf
W-Band Mixer
CHM2179b98F
Typical Bias and IF Configuration
Several external configurations are possible for bias and IF. The objective is to give flexibility
for the integration.
As this component is mainly dedicated to low IF use, there are several possibilities for
interfacing with low noise IF amplifier. The optimum IF load for conversion loss is 200,
however depending on the IF amplifier noise characteristic this load can be modified in order
to optimise the noise figure. A series capacitor, between IF output and the load is
recommended.
Due to high sensitivity to electrical discharges an integrated resistance is used and two ports
are available for biasing. One is for the connection of a decoupling capacitor (C_ext) and the
other one is for the supply voltage connection through an external series resistance (+V port).
However, in order to keep the compatibility with the CHM2179b98F, only the “C_ext” port can
be used.
C_bias
C_ext
LO
+V
R_bias1
+V
1k
R_load_IF
C_IF
IF
RF
+V
C_bias
R_bias2
C_ext
LO
+V
1k
R_load_IF
C_IF
IF
RF
Recommended external bias and IF
configuration
Other possible configuration
(compatible with the previous version)
The recommended values for external components are:
C_bias
R_bias x C >> 1/F_IF
R_bias1
2.9kfor 1mA current consumption (V = 4.5V, typical LO power)
R_bias2
R_bias2 = R_bias1 + 1k
R_load_IF
From 50 to 200
Notes:
(1) R_bias = R_bias1 + 1kwhen “+V” port is used, otherwise R_bias = R_bias2. R_bias can
be adjusted if necessary; this allows optimizing the performances when some parameters are
different from recommended ones (Supply voltage, LO power …). However maximum ratings
for the current have to be taken into account.
(2) A series capacitor at IF outputs is recommended for DC decoupling.
Ref. : DSCHM2179b98F3246 - 03 Sep 13
5/8 Specifications subject to change without notice
Bât. Charmille - Parc SILIC - 10, Avenue du Québec - 91140 VILLEBON-SUR-YVETTE - France
Tel.: +33 (0) 1 69 86 32 00 - Fax: +33 (0) 1 69 86 34 34

5 Page










PáginasTotal 8 Páginas
PDF Descargar[ Datasheet CHM2179B98F.PDF ]




Hoja de datos destacado

Número de piezaDescripciónFabricantes
CHM2179B98FGaAs Monolithic Microwave ICUnited Monolithic Semiconductors
United Monolithic Semiconductors

Número de piezaDescripciónFabricantes
SLA6805M

High Voltage 3 phase Motor Driver IC.

Sanken
Sanken
SDC1742

12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters.

Analog Devices
Analog Devices


DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares,
permitiéndote verlos en linea o descargarlos en PDF.


DataSheet.es    |   2020   |  Privacy Policy  |  Contacto  |  Buscar