|
|
Número de pieza | IN16C1058 | |
Descripción | Octal-UART Controller | |
Fabricantes | IK Semicon | |
Logotipo | ||
Hay una vista previa y un enlace de descarga de IN16C1058 (archivo pdf) en la parte inferior de esta página. Total 30 Páginas | ||
No Preview Available ! IN16C1058
OCTAL UART WITH 256-BYTE FIFO
JUNE 2009 REV 1.0
Octal-UART Controller
with 256-Byte FIFO
IN16C1058
Revision 1.0
IK Semicon Co., Ltd.
1
1 page 1. Description
IN16C1058
OCTAL UART WITH 256-BYTE FIFO
JUNE 2009 REV 1.0
IN16C1058 is a octal UART(Universal Asynchronous Receiver/Transmitter) with 256-byte
FIFO supporting maximum communication speed of 5.3Mbps. It offers flow control
function by hardware or software and signal lines which can open or close the Tx/Rx
input/output when communicating by RS-422 or RS-485. It can handle eight internal
interrupt signals (INT0, INT1, INT2, INT3, INT4, INT5, INT6 and INT7) with one global
interrupt signal line (INT) and offers a new ‘Xoff re-transmit’ function in addition to Xon
any character.
UART can convert 8-bit parallel data to asynchronous serial data and vice versa. It can
transmit 5 to 8-bit letters, program I/O interrupt trigger level and has 256-byte I/O data
FIFO.
UART can generate any baud rate using clock and programmable divisor, transmit data
with even, odd or no parity and 1, 1.5, 2 stop bit, and detect break, idle, framing error,
FIFO overflow and parity error in input data.
UART has a software interface for modem controlling.
IN16C1058 offers TQFP128 (20x20 body) packages.
2. Features
■ 8 Channel UART
■ 3.3V Operation with 5V tolerant Inputs
■ Up to 5.3 Mbps Baud Rate (Up to 85 MHz Oscillator Input Clock)
■ 256-byte Transmit FIFO
■ 256-byte Receive FIFO with Error Flags
■ Industrial Temperature Range (-40 ℃ to +85 ℃)
■ Programmable and Selectable Transmit and Receive FIFO Trigger Levels for DMA
and Interrupt Generation
■ Software (Xon/Xoff) / Hardware (nRTS/nCTS) Flow Control
- Programmable Xon/Xoff Characters
- Programmable Auto-RTS and Auto-CTS
■ Global Interrupt Mask/Poll Control
■ Optional Data Flow Resume by Xon Any Character Control
■ Optional Data Flow Additional Halt by Xoff Re-transmit Control
■ Dedicated pins for automatic bus control of RS-422 and RS-485 communications.
- RS-422 Point to Point/Multi-Drop Control
- RS-485 Echo/Non Echo Control
■ DMA Signaling Capability for Both Received and Transmitted Data
■ Software Selectable Baud Rate Generator
■ Prescaler Provides Additional Divide-by-4 Function
■ Fast Data Bus Access Time
■ Programmable Sleep Mode
■ Programmable Serial Interface Characteristics
5
5 Page IN16C1058
OCTAL UART WITH 256-BYTE FIFO
JUNE 2009 REV 1.0
Table 2: Pin Description…continued
Name
nCTS0
nCTS1
nCTS2
nCTS3
nCTS4
nCTS5
nCTS6
nCTS7
nDTR0
nDTR1
nDTR2
nDTR3
nDTR4
nDTR5
nDTR6
nDTR7
nDSR0
nDSR1
nDSR2
nDSR3
nDSR4
nDSR5
nDSR6
nDSR7
nDCD0
nDCD1
nDCD2
nDCD3
nDCD4
nDCD5
nDCD6
nDCD7
nRI0
nRI1
nRI2
nRI3
nRI4
nRI5
nRI6
nRI7
Pin Type
Description
70 I Clear to Send (active low). These pins indicate the modem is ready to
82 I accept transmitted data from the UART, and affect transmit and receive
92 I operations only when Auto-CTS function is enabled.
108 I
120 I
2I
14 I
24 I
69 O Data Terminal Ready (active low). These pins indicate UART is ready to
81 O transmit or receive data.
91 O
107 O
119 O
1O
13 O
23 O
71 I Data Set Ready (active low). These pins indicate modem is powered-on
81 I and is ready for data exchange with UART.
93 I
109 I
121 I
3I
15 I
25 I
76 I Carrier Detect (active low). These pins indicate that a carrier has been
86 I detected by modem.
102 I
112 I
124 I
6I
18 I
28 I
77 I Ring Indicator (active low). These pins indicate the modem has received a
87 I ringing signal from telephone line. A low to high transition on these input
103 I pins generates a modem status interrupt, if enabled.
113 I
125 I
7I
19 I
29 I
11
11 Page |
Páginas | Total 30 Páginas | |
PDF Descargar | [ Datasheet IN16C1058.PDF ] |
Número de pieza | Descripción | Fabricantes |
IN16C1054 | Quard Uart | IK Semicon |
IN16C1058 | Octal-UART Controller | IK Semicon |
Número de pieza | Descripción | Fabricantes |
SLA6805M | High Voltage 3 phase Motor Driver IC. |
Sanken |
SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
Analog Devices |
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |