|
|
PDF AAT3673 Data sheet ( Hoja de datos )
| Número de pieza | AAT3673 | |
| Descripción | 1.6A Dynamic Battery Charger and Power Manager | |
| Fabricantes | Skyworks | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de AAT3673 (archivo pdf) en la parte inferior de esta página. Total 28 Páginas | ||
|
No Preview Available !
DATA SHEET
AAT3673
1.6A Dynamic Battery Charger and Power Manager
General Description
The AAT3673 BatteryManager is a highly integrated sin-
gle-cell (4.2V) lithium-ion/polymer battery charger and
system power management IC that enables simultane-
ous battery charging and system load management. For
increased safety, the AAT3673 includes over-voltage
input protection (OVP) up to 28V.
The AAT3673 provides charging current and system
power management from a single input that may be sup-
plied by an AC adapter or USB port power source (ADP).
This device allows the user to program the battery
charge current up to 1.6A depending on the current
shared with the system output. A battery charge timeout
timer is provided for charging safety and the charge ter-
mination current is also user-programmable.
The AAT3673 employs a battery charge current reduc-
tion function that enables continued system operation in
the event the input source can not supply the required
load current. When operated under excessive thermal
conditions, the AAT3673 has a digitally controlled ther-
mal loop which allows the maximum possible charging
current for any given ambient temperature condition.
Battery temperature, voltage and charge state are mon-
itored for fault conditions. The AAT3673-1/-2/-4/-5 has
two status monitor output pins (STAT1 and STAT2), and
the AAT3673-3/-6 has one status monitor output (STAT1)
provided to indicate battery charge status by directly
driving external LEDs.
The AAT3673 is available in a Pb-free, thermally
enhanced, space-saving 16-pin 4 × 4mm TDFN package.
Typical Application
Features
• System Load Power Control from Either ADP or
Battery
• ADP Presence Automatically Routes Power from
Source to Load and Charges Battery
• Automatic Charge Reduction Loop to Minimize
Charge Time with USB Input
• 4.0V~6.5V Input Voltage Range
• Over-Voltage Input Protection (OVP) up to 28V
• Digitally Controlled Thermal Protection
• Battery Power Enable
• Programmable Battery Charge Timer
• Battery Cell Temperature Sensing
• Charge Status Reporting (LEDs)
• Automatic Recharge Sequencing
• Battery Over-Voltage, Over-Current, and
Over-Temperature Protection
• System Load Current Limiting
• 16-pin 4 × 4mm TDFN Package
Applications
• Cellular Phones
• Digital Still Cameras
• Digital Video Cameras
• Global Positioning Systems (GPS)
• MP3 Players
• Handheld PCs
System Load
Adapter Input
STAT1
OUT
STAT2
BAT
ADP
BYP
CADP
10μF AAT3673-1/-2/-4/-5
BAT+
CBAT
10μF
Enable
Enable Input to Output
Enable Battery to Out
EN
ENO
ENBAT
TS
CHRADP
10kΩ
Temp
Battery
CHR Threshold Pack
ADPSET
CT
RADP
TERM
RTERM
GND
BYP
CBYP
CT
Adapter Input
EN1
EN2
CADP
10μF
Enable Input to Output
Enable Battery to Out
STAT1
ADP
OUT
BAT
System Load
BAT+
AAT3673-3/-6 BYP
CBAT
10μF
EN1
EN2
ENO
TS
ENBAT CHRADP
10kΩ
Temp
Battery
CHR Threshold Pack
ADPSET
CT
RADP
TERM
RTERM
GND
BYP
CBYP
CT
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [email protected] • www.skyworksinc.com
201881B • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice. • April 25, 2012
1
1 page  
DATA SHEET
AAT3673
1.6A Dynamic Battery Charger and Power Manager
Electrical Characteristics (continued)
VADP = 5V, TA = -25°C to +85°C; unless otherwise noted, typical values are TA = 25°C.
Symbol Description
Current Regulation
ILIM_ADP
ILIM_BAT
ICH_CC_ADP
ΔICH_CC_ADP/
ICH_CC_ADP
ADP Current Limit (Fixed)
BAT_OUT Current Limit (Fixed)
ADP Charge Constant Current Charge Range
Constant Current Charge Current Regulation Tolerance
ICH_TKL_ADP ADP Trickle Charge Current
VADPSET ADPSET Pin Voltage Regulation
VTERM
TERM Pin Voltage Regulation
KI_CC_ADP
Constant Current Charge Current Set Factor: ICH_ADP/
IADPSET
KI_TERM
Termination Current Set Factor: ICH_TERM/ITERM
AAT3673-3 Only
ICH_LO
USB Low Level Charge Current (Fixed)
ICH_HI
USB High Level Charge Current (Fixed)
Logic Control/Protection
Input High Threshold
VEN Input Low Threshold
VSTATx
TC
TTKL
VOVP
IOCP
TS1
TS2
TLOOP_IN
TLOOP_OUT
TLOOP_REG
Output Low Voltage
Fast Charge (Trickle Charge + Constant Current +
Constant Voltage Charges Together) Timeout
Trickle Charge Timeout
Battery Over-Voltage Protection Threshold
Battery Charge Over-Current Protection Threshold
High Temperature Threshold
Low Temperature Threshold
Digital Thermal Loop Entry Threshold
Digital Thermal Loop Exit Threshold
Digital Thermal Loop Regulated Temperature
TSHDN
Chip Thermal Shutdown Temperature
Conditions
ICH_CC_ADP = 1A
VEN1 = VEN2 = 0
VEN1 = 0; VEN2 = 5V
STATx Pin Sinks
8mA
CCT = 0.1μF
In All Modes
Threshold
Threshold
Threshold
Hysteresis
Min Typ Max Units
1.6
2.3
100
-12
10
2
2
29300
2000
1600
12
A
mA
%
%
ICH_CC_ADP
V
85 100
450 500
mA
1.6
0.4 V
0.4
VCO(REG)
+ 0.1
28
58
7
TC/8
VCO(REG)
+ 0.15
100
30
60
115
95
100
140
15
VCO(REG)
+ 0.2
32
62
Hour
Min
V
% ICH_CC
% VBYP
°C
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [email protected] • www.skyworksinc.com
201881B • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice. • April 25, 2012
5
5 Page 
Typical Characteristics
OVP Event Transient
(VADP = 6.3V → 8V; VOVPT = 6.75V; ICH_CC = 1A)
12
VADP
10 VBYP
8 ICH
4
3.5
3
6 2.5
42
2 1.5
01
-2 0.5
-4 0
Time (1μs/div)
DATA SHEET
AAT3673
1.6A Dynamic Battery Charger and Power Manager
OVP Event Transient
(VADP = 6.3V → 8V; VOVPT = 6.75V; ICH_CC = 1A)
12
VADP
10 VBYP
8 ICH
4
3.5
3
6 2.5
42
2 1.5
01
-2 0.5
-4 0
Time (5μs/div)
Response of Out when Switching from VBAT to VADP
(VADP = 0V → 5V; VBAT = 3.6V; RLOAD = 50Ω;
ENBAT = 0V; ENO = 0V; COUT = 10μF)
8 4.2
7 VADP
VOUT
6 VBAT
4.1
4
5 3.9
4 3.8
3 3.7
2 3.6
1 3.5
0 3.4
Time (100μs/div)
Response of Out when Switching from VADP to VBAT
(VADP = 5V → 0V; VBAT = 3.6V; RLOAD = 50Ω;
ENBAT = 0V; ENO = 0V; COUT = 10μF)
8 4.2
VADP
7 VOUT 4.1
6 VBAT 4
5 3.9
4 3.8
3 3.7
2 3.6
1 3.5
0 3.4
Time (200μs/div)
Response of Out when Switching from VBAT to VADP
(VADP = 0V→ 5V; VBAT = 3.6V; RLOAD = 50Ω;
ENBAT = 5V; ENO = 0V; COUT = 10μF)
8 4.2
VADP
7 VOUT 4.1
6 VBAT 4
5 3.9
4 3.8
3 3.7
2 3.6
1 3.5
0 3.4
Time (200μs/div)
Response of Out when Switching from VADP to VBAT
(VADP = 5V → 0V; VBAT = 3.6V; RLOAD = 50Ω;
ENBAT = 5V; ENO = 0V; COUT = 10μF)
8 4.2
7
VADP
VOUT
4.1
6 VBAT 4
5 3.9
4 3.8
3 3.7
2 3.6
1 3.5
0 3.4
Time (1ms/div)
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [email protected] • www.skyworksinc.com
201881B • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice. • April 25, 2012
11
11 Page | ||
| Páginas | Total 28 Páginas | |
| PDF Descargar | [ Datasheet AAT3673.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| AAT3670 | Dynamic Battery Charger and Power Manager |  ANALOGICTECH |
| AAT3672 | 1.6A Dynamic Battery Charger and Power Manager | Skyworks |
| AAT3673 | 1.6A Dynamic Battery Charger and Power Manager | Skyworks |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |