DataSheet.es    


PDF NWP2081T Data sheet ( Hoja de datos )

Número de pieza NWP2081T
Descripción Half-bridge driver IC
Fabricantes NXP Semiconductors 
Logotipo NXP Semiconductors Logotipo



Hay una vista previa y un enlace de descarga de NWP2081T (archivo pdf) en la parte inferior de esta página.


Total 12 Páginas

No Preview Available ! NWP2081T Hoja de datos, Descripción, Manual

NWP2081T
Half-bridge driver IC
Rev. 1 — 3 September 2013
Product data sheet
1. General description
The NWP2081T is a high-voltage monolithic integrated circuit made using the latch-up
free Silicon-On-Insulator (SOI) process. The circuit is designed for driving MOSFETs in a
half-bridge configuration.
2. Features and benefits
Latch-up free and robust half-bridge driver
Output driver capability: IO(sink) = 400 mA and IO(source) = 200 mA
Maximum frequency 800 kHz
Outputs in phase with CLK input
Adjustable dead-time
Low active shutdown input
3. Applications
Driver (via external MOSFETs) for any kind of load in a half-bridge configuration
4. Ordering information
Table 1. Ordering information
Type number Package
Name Description
NWP2081T SO8
plastic small outline package; 8 leads
Version
SOT96-1

1 page




NWP2081T pdf
NXP Semiconductors
NWP2081T
Half-bridge driver IC
8. Limiting values
Table 4. Limiting values
In accordance with the Absolute Maximum Rating System (IEC 60134).
Symbol Parameter
Conditions
VDD supply voltage
VFS voltage on pin FS
VSH voltage on pin SH
nominal
source high-side MOSFET
t < 1 s
VCLK
Vi(SD)
voltage on pin CLK
input voltage on pin SD
logic input for output drivers
logic input for output drivers and
analog input for non-overlap setting
SR slew rate
on pin SH; repetitive
Tj
Tamb
Tstg
VESD
junction temperature
ambient temperature
storage temperature
electrostatic discharge
voltage
human body model:
pins FS, GH and SH
pins VDD, SD, CLK, and GL
charge device model:
all pins
Min
0
VSH
3
14
0
6
40
40
55
[1]
-
-
[2]
-
Max
15.5
VSH + 15.5
+600
+600
15.5
15.5
Unit
V
V
V
V
V
V
+6
+150
+150
+150
V/ns
C
C
C
1 kV
2 kV
500 V
[1] In accordance with the Human Body Model (HBM): equivalent to discharging a 100 pF capacitor through a 1.5 kseries resistor.
[2] In accordance with the Charged Device Model (CDM): equivalent to discharging the IC up to 1 kV and the subsequent discharging of
each pin down to 0 V over a 1 resistor.
9. Thermal characteristics
Table 5.
Symbol
SO8
Rth(j-a)
Thermal characteristics
Parameter
thermal resistance from junction to ambient
[1] In accordance with IEC 60747-1.
Conditions
in free air
Typ
[1] 160
Unit
K/W
NWP2081T
Product data sheet
All information provided in this document is subject to legal disclaimers.
Rev. 1 — 3 September 2013
© NXP B.V. 2013. All rights reserved.
5 of 12

5 Page





NWP2081T arduino
NXP Semiconductors
NWP2081T
Half-bridge driver IC
Export control — This document as well as the item(s) described herein
may be subject to export control regulations. Export might require a prior
authorization from competent authorities.
Non-automotive qualified products — Unless this data sheet expressly
states that this specific NXP Semiconductors product is automotive qualified,
the product is not suitable for automotive use. It is neither qualified nor tested
in accordance with automotive testing or application requirements. NXP
Semiconductors accepts no liability for inclusion and/or use of
non-automotive qualified products in automotive equipment or applications.
In the event that customer uses the product for design-in and use in
automotive applications to automotive specifications and standards, customer
(a) shall use the product without NXP Semiconductors’ warranty of the
product for such automotive applications, use and specifications, and (b)
whenever customer uses the product for automotive applications beyond
NXP Semiconductors’ specifications such use shall be solely at customer’s
own risk, and (c) customer fully indemnifies NXP Semiconductors for any
liability, damages or failed product claims resulting from customer design and
use of the product for automotive applications beyond NXP Semiconductors’
standard warranty and NXP Semiconductors’ product specifications.
Translations — A non-English (translated) version of a document is for
reference only. The English version shall prevail in case of any discrepancy
between the translated and English versions.
14.4 Trademarks
Notice: All referenced brands, product names, service names and trademarks
are the property of their respective owners.
15. Contact information
For more information, please visit: http://www.nxp.com
For sales office addresses, please send an email to: [email protected]
NWP2081T
Product data sheet
All information provided in this document is subject to legal disclaimers.
Rev. 1 — 3 September 2013
© NXP B.V. 2013. All rights reserved.
11 of 12

11 Page







PáginasTotal 12 Páginas
PDF Descargar[ Datasheet NWP2081T.PDF ]




Hoja de datos destacado

Número de piezaDescripciónFabricantes
NWP2081THalf-bridge driver ICNXP Semiconductors
NXP Semiconductors

Número de piezaDescripciónFabricantes
SLA6805M

High Voltage 3 phase Motor Driver IC.

Sanken
Sanken
SDC1742

12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters.

Analog Devices
Analog Devices


DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares,
permitiéndote verlos en linea o descargarlos en PDF.


DataSheet.es    |   2020   |  Privacy Policy  |  Contacto  |  Buscar