Datenblatt-pdf.com


PESD5V0S5UD Schematic ( PDF Datasheet ) - NXP Semiconductors

Teilenummer PESD5V0S5UD
Beschreibung Fivefold ESD protection diode arrays
Hersteller NXP Semiconductors
Logo NXP Semiconductors Logo 




Gesamt 13 Seiten
PESD5V0S5UD Datasheet, Funktion
PESDxS5UD series
Fivefold ESD protection diode arrays
Rev. 02 — 7 December 2006
Product data sheet
1. Product profile
1.1 General description
Fivefold ElectroStatic Discharge (ESD) protection diode arrays in a SOT457 (SC-74) small
Surface-Mounted Device (SMD) plastic package designed to protect up to five signal lines
from the damage caused by ESD and other transients.
1.2 Features
I ESD protection of up to five lines
I Max. peak pulse power: PPP = 200 W
I Ultra low leakage current: IRM = 50 pA
I Low clamping voltage: VCL = 12 V at
IPP = 20 A
I ESD protection up to 30 kV
I IEC 61000-4-2; level 4 (ESD)
I IEC 61000-4-5 (surge); IPP up to 20 A
1.3 Applications
I Computers and peripherals
I Audio and video equipment
I Cellular handsets and accessories
I Communication systems
I Portable electronics
I Subscriber Identity Module (SIM) card
protection
1.4 Quick reference data
Table 1. Quick reference data
Symbol Parameter
Per diode
VRWM
reverse standoff voltage
PESD3V3S5UD
PESD5V0S5UD
PESD12VS5UD
PESD15VS5UD
PESD24VS5UD
Conditions
Min Typ Max Unit
- - 3.3 V
- - 5V
- - 12 V
- - 15 V
- - 24 V






PESD5V0S5UD Datasheet, Funktion
NXP Semiconductors
PESDxS5UD series
Fivefold ESD protection diode arrays
220
Cd
(pF)
180
006aaa700
80
Cd
(pF)
60
006aaa701
140
(1)
100 (2)
40
(1)
(2)
20 (3)
60
0123
f = 1 MHz; Tamb = 25 °C
(1) PESD3V3S5UD
(2) PESD5V0S5UD
45
VR (V)
Fig 5. Diode capacitance as a function of reverse
voltage; typical values
006aaa699
10
0
0 5 10 15 20 25
VR (V)
f = 1 MHz; Tamb = 25 °C
(1) PESD12VS5UD
(2) PESD15VS5UD
(3) PESD24VS5UD
Fig 6. Diode capacitance as a function of reverse
voltage; typical values
I
IRM
IRM(25°C)
1
VCL VBR VRWM
+
P-N
IRM
IR
V
101
100
50
0
50 100 150
Tj (°C)
IPP
006aaa407
PESD3V3S5UD; PESD5V0S5UD
IR is less than 5 nA at 150 °C for:
PESD12VS5UD; PESD15VS5UD; PESD24VS5UD
Fig 7. Relative variation of reverse leakage current as
a function of junction temperature; typical
values
Fig 8. V-I characteristics for a unidirectional ESD
protection diode
PESDXS5UD_SER_2
Product data sheet
Rev. 02 — 7 December 2006
© NXP B.V. 2006. All rights reserved.
6 of 13

6 Page









PESD5V0S5UD pdf, datenblatt
NXP Semiconductors
PESDxS5UD series
Fivefold ESD protection diode arrays
12. Legal information
12.1 Data sheet status
Document status[1][2]
Product status[3]
Objective [short] data sheet Development
Preliminary [short] data sheet Qualification
Product [short] data sheet
Production
Definition
This document contains data from the objective specification for product development.
This document contains data from the preliminary specification.
This document contains the product specification.
[1] Please consult the most recently issued document before initiating or completing a design.
[2] The term ‘short data sheet’ is explained in section “Definitions”.
[3] The product status of device(s) described in this document may have changed since this document was published and may differ in case of multiple devices. The latest product status
information is available on the Internet at URL http://www.nxp.com.
12.2 Definitions
Draft — The document is a draft version only. The content is still under
internal review and subject to formal approval, which may result in
modifications or additions. NXP Semiconductors does not give any
representations or warranties as to the accuracy or completeness of
information included herein and shall have no liability for the consequences of
use of such information.
Short data sheet — A short data sheet is an extract from a full data sheet
with the same product type number(s) and title. A short data sheet is intended
for quick reference only and should not be relied upon to contain detailed and
full information. For detailed and full information see the relevant full data
sheet, which is available on request via the local NXP Semiconductors sales
office. In case of any inconsistency or conflict with the short data sheet, the
full data sheet shall prevail.
12.3 Disclaimers
General — Information in this document is believed to be accurate and
reliable. However, NXP Semiconductors does not give any representations or
warranties, expressed or implied, as to the accuracy or completeness of such
information and shall have no liability for the consequences of use of such
information.
Right to make changes — NXP Semiconductors reserves the right to make
changes to information published in this document, including without
limitation specifications and product descriptions, at any time and without
notice. This document supersedes and replaces all information supplied prior
to the publication hereof.
Suitability for use — NXP Semiconductors products are not designed,
authorized or warranted to be suitable for use in medical, military, aircraft,
space or life support equipment, nor in applications where failure or
malfunction of a NXP Semiconductors product can reasonably be expected to
result in personal injury, death or severe property or environmental damage.
NXP Semiconductors accepts no liability for inclusion and/or use of NXP
Semiconductors products in such equipment or applications and therefore
such inclusion and/or use is at the customer’s own risk.
Applications — Applications that are described herein for any of these
products are for illustrative purposes only. NXP Semiconductors makes no
representation or warranty that such applications will be suitable for the
specified use without further testing or modification.
Limiting values — Stress above one or more limiting values (as defined in
the Absolute Maximum Ratings System of IEC 60134) may cause permanent
damage to the device. Limiting values are stress ratings only and operation of
the device at these or any other conditions above those given in the
Characteristics sections of this document is not implied. Exposure to limiting
values for extended periods may affect device reliability.
Terms and conditions of sale — NXP Semiconductors products are sold
subject to the general terms and conditions of commercial sale, as published
at http://www.nxp.com/profile/terms, including those pertaining to warranty,
intellectual property rights infringement and limitation of liability, unless
explicitly otherwise agreed to in writing by NXP Semiconductors. In case of
any inconsistency or conflict between information in this document and such
terms and conditions, the latter will prevail.
No offer to sell or license — Nothing in this document may be interpreted
or construed as an offer to sell products that is open for acceptance or the
grant, conveyance or implication of any license under any copyrights, patents
or other industrial or intellectual property rights.
12.4 Trademarks
Notice: All referenced brands, product names, service names and trademarks
are the property of their respective owners.
13. Contact information
For additional information, please visit: http://www.nxp.com
For sales office addresses, send an email to: [email protected]
PESDXS5UD_SER_2
Product data sheet
Rev. 02 — 7 December 2006
© NXP B.V. 2006. All rights reserved.
12 of 13

12 Page





SeitenGesamt 13 Seiten
PDF Download[ PESD5V0S5UD Schematic.PDF ]

Link teilen




Besondere Datenblatt

TeilenummerBeschreibungHersteller
PESD5V0S5UDFivefold ESD protection diode arraysNXP Semiconductors
NXP Semiconductors

TeilenummerBeschreibungHersteller
CD40175BC

Hex D-Type Flip-Flop / Quad D-Type Flip-Flop.

Fairchild Semiconductor
Fairchild Semiconductor
KTD1146

EPITAXIAL PLANAR NPN TRANSISTOR.

KEC
KEC


www.Datenblatt-PDF.com       |      2020       |      Kontakt     |      Suche