|
|
PDF SLC7649S-151KLC Data sheet ( Hoja de datos )
| Número de pieza | SLC7649S-151KLC | |
| Descripción | Shielded Power Inductors | |
| Fabricantes | Coilcraft | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de SLC7649S-151KLC (archivo pdf) en la parte inferior de esta página. Total 2 Páginas | ||
|
No Preview Available !
Document 481-1
Shielded Power Inductors – SLC7649
L DCR SRF
±10%2 ±5%3 typ4 Isat5 Irms6
Part number1 (nH) (mOhms) (MHz) (A) (A)
SLC7649S-360KL_ 36 0.17 1150 100 39
SLC7649S-500KL_ 50 0.17 900 84 39
SLC7649S-700KL_ 70 0.17 750 65 39
SLC7649S-101KL_ 100 0.17 110 42 39
SLC7649S-121KL_ 120 0.17 78 33 39
SLC7649S-151KL_ 150 0.17 67 27 39
1. When ordering, please specify termination and packaging code:
SLC7649S-101KLC
Termination: L = RoHS compliant matte tin over nickel over copper
Special order: T = RoHS tin-silver-copper
(95.5/4/0.5) or S = non-RoHS tin-lead (63/37).
Packaging: C = 7″ machine-ready reel. EIA-481 embossed plastic
tape (250 per full reel).
B = Less than full reel. In tape, but not machine ready.
To have a leader and trailer added ($25 charge),
use code letter C instead.
D = 13″ machine-ready reel. EIA-481 embossed plastic
tape (1000 per full reel). Factory order only, not
stocked.
2. Inductance tested at 100 kHz, 0.1 Vrms using an Agilent/HP 4263B
LCR meter or equivalent.
3. DCR is measured between the two points indicated on the dimen-
sional drawing.
4. SRF measured using an Agilent/HP 8753ES network analyzer or
equivalent.
5. DC current at 25°C that causes a 20% (typ) inductance drop from its
value without current. Click for temperature derating information.
6. Current that causes a 40°C temperature rise from 25°C ambient. This
information is for reference only and does not represent absolute
maximum ratings. Click for temperature derating information.
7. Electrical specifications at 25°C.
Refer to Doc 362 “Soldering Surface Mount Components” before soldering.
• Designed for use in multi-phaseVRM/VRD regulators and high
current/high frequency DC/DC converters.
• Requires only 60 mm2 of board space; can handle up to 100 A
Core material Ferrite
Core and winding loss See www.coilcraft.com/coreloss
Terminations RoHS compliant matte tin over nickel over copper.
Other terminations available at additional cost.
Weight 0.9 g
Ambient temperature –40°C to +85°C with (40°C rise) Irms current.
Maximum part temperature +125°C (ambient + temp rise). Derating.
Storage temperature Component: –40°C to +125°C.
Tape and reel packaging: –40°C to +80°C
Resistance to soldering heat Max three 40 second reflows at
+260°C, parts cooled to room temperature between cycles
Moisture Sensitivity Level (MSL) 1 (unlimited floor life at <30°C /
85% relative humidity)
Failures in Time (FIT) / Mean Time Between Failures (MTBF)
38 per billion hours / 26,315,789 hours, calculated per Telcordia SR-332
Packaging 250/7″reel; 1000/13″ reel Plastic tape: 16 mm wide,
0.35 mm thick, 12 mm pocket spacing, 5 mm pocket depth
PCB washing Tested to MIL-STD-202 Method 215 plus an additional
aqueous wash. See Doc787_PCB_Washing.pdf.
07.3,6020 max
0.295
7,49
max
XXX
X
Dash
number
Internal
code
0.195
4,96
max
0.105
2,67
0.085
2,16
Dimensions
are in
inches
mm
Points used for measuring DCR
Recommended
Land Pattern
0.100
2,54
0.135
3,43
0.225
5,72
Document 481-1 Revised 09/15/15
1 page | ||
| Páginas | Total 2 Páginas | |
| PDF Descargar | [ Datasheet SLC7649S-151KLC.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| SLC7649S-151KLB | Shielded Power Inductors | Coilcraft |
| SLC7649S-151KLC | Shielded Power Inductors | Coilcraft |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |