Datenblatt-pdf.com


C167CS-4R Schematic ( PDF Datasheet ) - Infineon Technologies

Teilenummer C167CS-4R
Beschreibung 16-Bit Single-Chip Microcontroller
Hersteller Infineon Technologies
Logo Infineon Technologies Logo 




Gesamt 30 Seiten
C167CS-4R Datasheet, Funktion
Data Sheet, V2.2, Aug. 2001
C167CS-4R
C167CS-L
16-Bit Single-Chip Microcontroller
Microcontrollers
Never stop thinking.






C167CS-4R Datasheet, Funktion
C167CS-4R
C167CS-L
• Supported by a Large Range of Development Tools like C-Compilers,
Macro-Assembler Packages, Emulators, Evaluation Boards, HLL-Debuggers,
Simulators, Logic Analyzer Disassemblers, Programming Boards
• On-Chip Bootstrap Loader
• 144-Pin MQFP Package
This document describes several derivatives of the C167 group. Table 1 enumerates
these derivatives and summarizes the differences. As this document refers to all of these
derivatives, some descriptions may not apply to a specific product.
Table 1
C167CS Derivative Synopsis
Derivative1)
Program Memory
Operating Frequency
SAK-C167CS-LM
SAB-C167CS-LM
---
25 MHz
SAK-C167CS-L33M
SAB-C167CS-L33M
---
33 MHz
SAK-C167CS-L40M
SAB-C167CS-L40M
---
40 MHz
SAK-C167CS-4RM
SAB-C167CS-4RM
32 KByte ROM
25 MHz
SAK-C167CS-4R33M
SAB-C167CS-4R33M
32 KByte ROM
33 MHz
SAK-C167CS-4R40M
SAB-C167CS-4R40M
32 KByte ROM
40 MHz
1) This Data Sheet is valid for devices starting with and including design step BA.
For simplicity all versions are referred to by the term C167CS throughout this document.
Data Sheet
2 V2.2, 2001-08

6 Page









C167CS-4R pdf, datenblatt
C167CS-4R
C167CS-L
Table 2
Pin Definitions and Functions (contd)
Symbol Pin Input Function
Num. Outp.
P3 IO Port 3 is a 15-bit bidirectional I/O port. It is bit-wise
programmable for input or output via direction bits. For a pin
configured as input, the output driver is put into high-
impedance state. Port 3 outputs can be configured as push/
pull or open drain drivers. The input threshold of Port 3 is
selectable (TTL or special).
The following Port 3 pins also serve for alternate functions:
P3.0 65
I
T0IN
CAPCOM1 Timer T0 Count Input
P3.1 66
O
T6OUT GPT2 Timer T6 Toggle Latch Output
P3.2 67
I
CAPIN GPT2 Register CAPREL Capture Input
P3.3 68
O
T3OUT GPT1 Timer T3 Toggle Latch Output
P3.4 69
I
T3EUD GPT1 Timer T3 External Up/Down Control Input
P3.5 70
I
T4IN
GPT1 Timer T4 Count/Gate/Reload/Capture Inp
P3.6 73
I
T3IN
GPT1 Timer T3 Count/Gate Input
P3.7 74
I
T2IN
GPT1 Timer T2 Count/Gate/Reload/Capture Inp
P3.8 75
I/O MRST
SSC Master-Receive/Slave-Transmit Inp./Outp.
P3.9 76
I/O MTSR
SSC Master-Transmit/Slave-Receive Outp./Inp.
P3.10 77
O
T×D0
ASC0 Clock/Data Output (Async./Sync.)
P3.11 78
I/O R×D0
ASC0 Data Input (Async.) or Inp./Outp. (Sync.)
P3.12 79
O
BHE
External Memory High Byte Enable Signal,
O WRH External Memory High Byte Write Strobe
P3.13 80
I/O SCLK
SSC Master Clock Output / Slave Clock Input.
P3.15 81
O
CLKOUT System Clock Output (= CPU Clock)
O
FOUT
Programmable Frequency Output
N.C. 84
This pin is not connected in the C167CS.
No connection to the PCB is required.
Data Sheet
8 V2.2, 2001-08

12 Page





SeitenGesamt 30 Seiten
PDF Download[ C167CS-4R Schematic.PDF ]

Link teilen




Besondere Datenblatt

TeilenummerBeschreibungHersteller
C167CS-4R16-Bit Single-Chip MicrocontrollerInfineon Technologies
Infineon Technologies

TeilenummerBeschreibungHersteller
CD40175BC

Hex D-Type Flip-Flop / Quad D-Type Flip-Flop.

Fairchild Semiconductor
Fairchild Semiconductor
KTD1146

EPITAXIAL PLANAR NPN TRANSISTOR.

KEC
KEC


www.Datenblatt-PDF.com       |      2020       |      Kontakt     |      Suche