|
|
PDF A1244 Data sheet ( Hoja de datos )
| Número de pieza | A1244 | |
| Descripción | Two Wire Hall-Effect Latch | |
| Fabricantes | Allegro MicroSystems | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de A1244 (archivo pdf) en la parte inferior de esta página. Total 12 Páginas | ||
|
No Preview Available !
A1244
Chopper-Stabilized, Two-Wire Hall-Effect Latch
Features and Benefits
▪ AEC-Q100 automotive qualified
▪ High-speed, 4-phase chopper stabilization
▫ Low switchpoint drift throughout temperature range
▫ Low sensitivity to thermal and mechanical stresses
▪ On-chip protection
▫ Supply transient protection
▫ Reverse-battery protection
▪ On-board voltage regulator
▫ 3 to 24 V operation
▪ Solid-state reliability
▪ Robust EMC and ESD performance
▪ Industry-leading ISO 7637-2 performance through use of
proprietary, 40 V clamping structures
Packages:
3-pin ultra-mini SIP
1.5 mm × 4 mm × 3 mm
(suffix UA)
3-pin SOT23-W
2 mm × 3 mm × 1 mm
(suffix LH)
Description
The A1244 is a two-wire Hall-effect latch. The devices are
produced on theAllegro™ advanced BiCMOS wafer fabrication
process, which implements a patented high-frequency, 4-phase,
chopper stabilization technique. This technique achieves
magnetic stability over the full operating temperature range,
and eliminates offsets inherent in devices with a single Hall
element that are exposed to harsh application environments.
Two-wire latches are particularly advantageous in cost-sensitive
applications because they require one less wire for operation
versus the more traditional open-collector output switches.
Additionally, the system designer inherently gains diagnostics
because there is always output current flowing, which should
be in either of two narrow ranges. Any current level not within
these ranges indicates a fault condition.
The Hall-effect latch will be in the high output current state
in the presence of a magnetic south polarity field of sufficient
magnitude and will remain in this state until a sufficient north
polarity field is present.
The device is offered in two package styles. The LH is a
SOT-23W style, miniature low-profile package for surface-
mount applications. The UA is a 3-pin ultra-mini single inline
package (SIP) for through-hole mounting. Both packages are
lead (Pb) free, with 100% matte-tin leadframe plating.
Not to scale
Approximate footprint
V+ VCC
Functional Block Diagram
0.01 µF
Regulator
To all subcircuits
Clock/Logic
Amp
Low-Pass
Filter
Schmitt
Trigger
Polarity
A1244-DS, Rev. 2
GND
UA package only
GND
1 page  
A1244
Chopper-Stabilized, Two-Wire
Hall-Effect Latch
Characteristic Performance
A1244-I1
Average Supply Current (Low) versus Temperature
7.0
6.5
VCC = 24 V
6.0
VCC = 3.0 V
5.5
A1244-I1
Average Supply Current (Low) versus Supply Voltage
7.0
TA = 150°C
6.5
6.0
TA = 25°C
TA = –40°C
5.5
5.0
-60 -40 -20 0 20 40 60 80 100 120 140 160
Ambient Temperature, TA (°C)
A1244-I1,I2
Average Supply Current (High) versus Temperature
17
16
VCC = 24 V
15
VCC = 3.0 V
14
13
12
-60 -40 -20 0 20 40 60 80 100 120 140 160
Ambient Temperature, TA (°C)
5.0
2
6 10 14 18 22 26
Supply Voltage, VCC (V)
A1244-I1,I2
Average Supply Current (High) versus Supply Voltage
17
16 TA = –40°C
TA = 150°C
15
TA = 25°C
14
13
12
2 6 10 14 18 22 26
Supply Voltage, VCC (V)
Allegro MicroSystems, LLC
115 Northeast Cutoff
Worcester, Massachusetts 01615-0036 U.S.A.
1.508.853.5000; www.allegromicro.com
5
5 Page 
A1244
Chopper-Stabilized, Two-Wire
Hall-Effect Latch
Package UA, 3-Pin SIP
3.02
+0.08
–0.05
14.99 ±0.25
4.09
+0.08
–0.05
45°
B
E
1.02
MAX
E
2.04
10°
1.44 E
Branded
Face
0.79 REF
A
12 3
0.43
+0.05
–0.07
1.27 NOM
C
1.52 ±0.05
Mold Ejector
Pin Indent
45°
NNN
1
D Standard Branding Reference View
= Supplier emblem
N = Last three digits of device part number
0.41
+0.03
–0.06
For Reference Only; not for tooling use (reference DWG-9065)
Dimensions in millimeters
Dimensions exclusive of mold flash, gate burrs, and dambar protrusions
Exact case and lead configuration at supplier discretion within limits shown
A Dambar removal protrusion (6X)
B Gate and tie bar burr area
C Active Area Depth, 0.50 mm REF
D Branding scale and appearance at supplier discretion
E Hall element (not to scale)
Allegro MicroSystems, LLC
115 Northeast Cutoff
Worcester, Massachusetts 01615-0036 U.S.A.
1.508.853.5000; www.allegromicro.com
11
11 Page | ||
| Páginas | Total 12 Páginas | |
| PDF Descargar | [ Datasheet A1244.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| A1240A | (A1225A - A1280A) FPGAs |  Actel |
| A1240A-xxxx | (A1225A - A1280A) FPGAs | Actel |
| A1240XL | Integrator Series FPGAs | Actel |
| A1240XL-xxxx | FPGAs | Actel |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |