Datenblatt-pdf.com


PAN1455 Schematic ( PDF Datasheet ) - Panasonic

Teilenummer PAN1455
Beschreibung CLASS 2 BLUETOOTH MODULE
Hersteller Panasonic
Logo Panasonic Logo 




Gesamt 30 Seiten
PAN1455 Datasheet, Funktion
CLASSIFICATION
Einstufung
SUBJECT
Thema
CUSTOMER’S CODE
PAN1455/1555
PRODUCT SPECIFICATION
Produktspezifikation
CLASS 2 BLUETOOTH MODULE
Bluetooth Modul der Klasse 2
PANASONIC’S CODE
ENW89815C3KF/ENW89815A3KF
No. REV.
DS-1x55-2400-102
0.94
PAGE
Seite
1 of 33
DATE
Datum
29.05.2009
Specification for Production
Applicant / Manufacturer
Hardware
Applicant / Manufacturer
Software
Software Version
Contents
Customer
Panasonic Electronic Devices Europe GmbH
Zeppelinstrasse 19
21337 Lüneburg
Germany
Stollmann Entwicklungs- und Vertriebs-GmbH
Mendelssohnstrasse 15 D
22761 Hamburg
Germany
e.g. BlueRS+ SPP
Approval for Mass Production
By signing this document, Customer accepts the validity of the below-mentioned contents and
declares his full notice to it. Some passages may be changed if required; the validity shall not
be affected thereby.
CHECKED / APPROVED:
DATE:
NAME:
SIGNATURE:
NOTE:
AT LEAST ONE SET OF APPROVED SPECIFICATIONS SHOULD BE RETURNED TO
THE ADDRESS OF THE ISSUING PARTY.
PANASONIC ELECTRONIC DEVICES
EUROPE GMBH
High Frequency Products Business Group
- Wireless Modules -
APPROVED
genehmigt
CHECKED
geprüft
DESIGNED
erstellt






PAN1455 Datasheet, Funktion
CLASSIFICATION
Einstufung
SUBJECT
Thema
CUSTOMER’S CODE
PAN1455/1555
PRODUCT SPECIFICATION
Produktspezifikation
CLASS 2 BLUETOOTH MODULE
Bluetooth Modul der Klasse 2
PANASONIC’S CODE
ENW89815C3KF/ENW89815A3KF
No. REV.
DS-1x55-2400-102
0.94
PAGE
Seite
6 of 33
DATE
Datum
29.05.2009
4. SCOPE OF THIS DOCUMENT
Umfang dieses Dokumentes
This product specification applies to the class 2 bluetooth module ENW89815C3KF/ENW89815A3KF.
The different characters indicates different versions (refer to chapter 24 Ordering Information)
The used bluetooth chip is the BlueCore6 from the company CSR. (www.csr.com).
Diese Produktionsunterlagen beziehen sich auf das Class 2 Bluetooth Modul
ENW89815C3KF/ENW89815A3KF.
Die unterschiedlichen Zeichen bezeichnen verschiedene Versionen (Erklärung im Kapitel 24
Ordering Information)
Der verwendete Bluetooth Chip ist der BlueCore6 der Firma CSR.
5. HISTORY FOR THIS DOCUMENT
Versionsverwaltung dieses Dokumentes
Revision
Version
0.90
Date
Datum
06.03.2009
Modification / Remarks
Änderungen / Bemerkungen
Preliminary release.
0.91
30.03.2009
Add FCC Notice
0.92
04.05.2009
Include RF-Performance and current consumption
0.93
06.05.2009
Do minor changes in formatting, content links now included.
0.94
29.05.2009
Include final tables and Interface description
PANASONIC ELECTRONIC DEVICES EUROPE GMBH
www.pedeu.pansonic.de

6 Page









PAN1455 pdf, datenblatt
CLASSIFICATION
Einstufung
SUBJECT
Thema
CUSTOMER’S CODE
PAN1455/1555
PRODUCT SPECIFICATION
Produktspezifikation
CLASS 2 BLUETOOTH MODULE
Bluetooth Modul der Klasse 2
PANASONIC’S CODE
ENW89815C3KF/ENW89815A3KF
No. REV.
DS-1x55-2400-102
0.94
PAGE
Seite
12 of 33
DATE
Datum
29.05.2009
7.5. 3-WIRE SERIAL INTERFACE
When using only GND and UART_Rx, UART_Tx serial lines, you may leave UART_RTS#
and UART_CTS# open.
Note: Not using flow control can result in loss of data.
7.6. USB INTERFACE1,2
7.6.1. USB_DP, USB_DN
PAN1455/1555 contain a full speed USB version 2.0 compliant interface capable of directly
driving an USB cable. The PAN1455/1555 operates as a USB peripheral and responds to
requests from a USB master host controller.
7.7. GPIO INTERFACE
It is possible to use the programmable digital I/Os GPIO[0:17]. The Current from GPIO[17] is
limited to 3mA max.
For 5V tolerant GPIO´s refer to chapter 6.2.1SPP configuration DCE Mode
7.8. ADC3
It is possible to use the programmable I/Os PIO[0:3,6,7,13:15] as ADC.
The 12-bit ADC is a successive approximation analogue-to-digital converter. A/D conversion
can be performed in single, continuous, scan or discontinuous mode.
7.9. DAC4
It is possible to use the programmable I/Os PIO[2,3] as ADAC
The DAC module is a 12-bit, voltage output digital-to-analogue converter. The DAC can be
configured in 8- or 12-bit mode and may be used in conjunction with the DMA controller.
7.10. PCM INTERFACE5
PCM or Pulse Code Modulation is a sampling technique for digitising analogue signals.
The PCM interface for voice applications is provided via the PCM_OUT, PCM_IN, PCM_CLK
and PCM_SYNC pins.
The PCM interface can act as master or as slave device.
In master mode, clock frequencies of 128kHz, 256kHz or 512kHz can be generated, when
using the internal 4MHz clock. In slave mode, clock frequencies up to 2048kHz are accepted.
The Frame Clock is 8kHz. Long and Short Frame Sync are supported.
PAN1455/1555 interface directly to PCM audio devices including the following:
1 subject to firmware support, contact Stollmann for current status.
2 subject to hardware support, contact Stollmann for availability of variants
3 subject to firmware support, contact Stollmann for current status
4 subject to firmware support, contact Stollmann for current status
5 subject to firmware support, contact Stollmann for current status
PANASONIC ELECTRONIC DEVICES EUROPE GMBH
www.pedeu.pansonic.de

12 Page





SeitenGesamt 30 Seiten
PDF Download[ PAN1455 Schematic.PDF ]

Link teilen




Besondere Datenblatt

TeilenummerBeschreibungHersteller
PAN1455CLASS 2 BLUETOOTH MODULEPanasonic
Panasonic

TeilenummerBeschreibungHersteller
CD40175BC

Hex D-Type Flip-Flop / Quad D-Type Flip-Flop.

Fairchild Semiconductor
Fairchild Semiconductor
KTD1146

EPITAXIAL PLANAR NPN TRANSISTOR.

KEC
KEC


www.Datenblatt-PDF.com       |      2020       |      Kontakt     |      Suche