Datenblatt-pdf.com


AD22157 Schematic ( PDF Datasheet ) - Analog Devices

Teilenummer AD22157
Beschreibung Wheel Speed Sensor
Hersteller Analog Devices
Logo Analog Devices Logo 




Gesamt 7 Seiten
AD22157 Datasheet, Funktion
PRELIMINARY TECHNICAL DATA
Wheel Speed Sensor For
ABS Systems
Preliminary Technical Data
FEATURES
Speed and direction from 0Hz to 2500Hz
Air gap diagnostics
2-wire current-loop operation
Wide Operating Temperature Range
Functional during temperature excursions to 190C
Reverse Supply Protected (-30V)
APPLICATIONS
Automotive
Wheel speed and direction sensing
Transmission speed sensing
Industrial
Incremental position sensing
Proximity switching
AD22157
Functional Block Diagram
Vhigh
Tracker 1
PWM
7mA 7mA
Tracker 2
AD22157
Vlow
GENERAL DESCRIPTION
The AD22157 is a mixed signal magnetic field transducer
designed for applications where both speed sensing and direc-
tion sensing of a ferrous target wheel are required over a wide
speed range.
The device operates from a 2 wire high compliance current loop
and is suitable for continuous operation from -40C to 150C with
supplies up to +20 Vdc. The sensor is designed to remain func-
tional during voltage transients up to +27V.
The sensor output format is a current pulse from 7mA to 14mA
(the quiescent bias is 7mA) whose rising edge is accurately
placed relative to the edges of the target wheel. The pulse width
is determined by both target wheel direction and field strength.
The output pulse is coded in multiples of a well defined time
interval depending on direction and field strength in conform-
ance with industry standards currently being promoted by lead-
ing systems manufacturers.
Pulse widths corresponding to differential magnetic fields mea-
sured at the sensor of B >4mT (normal operation),
2mT<B<4mT (low field range), and B<2mT (very low field
range) are provided. Direction is indicated in the normal and
low ranges.
A fail safe stop signal repeating at approximately 1.5Hz is pro-
vided initially at power on, if the target wheel is stopped, or if
no dynamic signal is detected for some other reason.
The sensor combines integrated bulk Hall cell technology and
instrumentation circuitry to minimize temperature related drifts
REV. PrA
Information furnished by Analog Devices is believed to be accurate and reliable.
However, no responsibility is assumed by Analog Devices for its use, nor for any
infringements of patents or other rights of third parties which may result from its use.
No license is granted by implication or otherwise under any patent or patent rights of
Analog Devices.
associated with Hall cell characteristics. The sensor is compen-
sated to work optimally with SmCo magnets. The architecture
maximizes the advantages of fine line CMOS and high voltage
DMOS allowing the device to operate accurately in demanding
environments.
Principle features of the AD22157 include an adaptive differen-
tial zero crossing detector which accurately determines the posi-
tion of target wheel edges. This architecture eliminates the
effects of package and thermal stress on the Hall sensor array
resulting in 2% repeatability of the time interval from rising
edge to rising edge of the sensor output.
The sensor takes 4 edges from either power on or a stopped con-
dition to achieve full accuracy. The architecture employs digital
signal processing to provide robust functionality and eliminate
spurious or missing pulses under extreme conditions of EMC.
The AD22157 is housed in a 5 lead single-in-line (SIP) package
suitable for mounting with a back biasing magnet in a typical
wheel speed sensor assembly.
One Technology Way, P.O. Box 9106, Norwood, MA02062-9106,USA
www.analog.com
Analog Devices, Inc.,2001
-1-






AD22157 Datasheet, Funktion
PRELIMINARY TECHNICAL DATA
AD22157
Sensor Circuit
NC
NC
Vlow
Vhigh
NC
4.7nF
ECU
Vbat_high
(Battery Voltage)
Vbat_low
75Cecu
27V
Supply to additional sensors
Figure 6. Typical Connection in a Wheel Speed Sensing Application
A typical automotive application is shown above. The digital output signal is developed across a 75
ohm resistor. The power supply to the device is conditioned in an ECU to limit “load dump” pulses to
27v.
Front of AD22157
faces the wheel
Magnet placed
against the back side
of the AD22157
Right: Pin 5 to Pin 1
Magnet
Pin 1
Wheel Front View
Package Rear View
Left: Pin 1 to Pin 5
Figure 7. Wheel Direction Diagram
-6-
REV. PrA

6 Page







SeitenGesamt 7 Seiten
PDF Download[ AD22157 Schematic.PDF ]

Link teilen




Besondere Datenblatt

TeilenummerBeschreibungHersteller
AD22151Linear Output Magnetic Field SensorAnalog Devices
Analog Devices
AD22157Wheel Speed SensorAnalog Devices
Analog Devices

TeilenummerBeschreibungHersteller
CD40175BC

Hex D-Type Flip-Flop / Quad D-Type Flip-Flop.

Fairchild Semiconductor
Fairchild Semiconductor
KTD1146

EPITAXIAL PLANAR NPN TRANSISTOR.

KEC
KEC


www.Datenblatt-PDF.com       |      2020       |      Kontakt     |      Suche