|
|
Número de pieza | KV-V1430P | |
Descripción | Trinitron Colour Video TV | |
Fabricantes | Sony | |
Logotipo | ||
Hay una vista previa y un enlace de descarga de KV-V1430P (archivo pdf) en la parte inferior de esta página. Total 30 Páginas | ||
No Preview Available ! 3-858-249-11 (1)
KV-V1430K/P
KV-V2110K/P
Operating Instructions GB
Trinitron Colour Video TV
PAL NTSC 4.43
© 1995 by Sony Corporation Printed in Spain
1 page Step 2 — Connecting the Aerial
Connecting an Indoor Aerial (KV-
V1430K/P only)
If your local VHF/UHF signal is strong, an indoor aerial can be used to
obtain a clear picture. Connect the supplied dipole aerial as follows.
1 Insert the aerial until it clicks.
2 After turning on the video TV, adjust the aerial for best reception.
2
1
GB
Connecting an Outdoor Aerial
For better TV reception and recording with clear video picture, connect an
outdoor aerial to your video TV.
To connect a VHF aerial or a combination
VHF/UHF aerial—75-ohm coaxial cable (round)
Attach an IEC aerial connector to 75-ohm coaxial cable.
Plug the connector into the (aerial) socket of the video TV.
Rear
VHF/UHF aerial
On a wall
or
To connect both VHF and UHF aerials
Attach the aerial cable ends to the VHF/UHF mixer (not supplied).
Plug the mixer into the (aerial) socket of the video TV.
Rear
UHF aerial VHF aerial
300-ohm twin-lead cable
VHF/UHF mixer
75-ohm coaxial cable
After connecting the aerial, connect the mains lead to a wall outlet.
Getting Started 5
5 Page 123
456
789
-/-- 0
ON TIMER
SLEEP
PROGR
QUICK
TIMER
COUNTER
REC RESET
REW PLAY
FF
STOP PAUSE
TIMER REC
TIMER
ON SCREEN ON/OFF CLEAR
MENU
OK
To reactivate automatic fine-
tuning (AFT)
Repeat from the beginning and
select “ON” in step 5.
Manual Fine-Tuning
Normally, the automatic fine-tuning (AFT) is already working. However, if
the picture of a programme is distorted, you can use the manual fine-
tuning function to obtain better picture reception.
1 Press MENU to display the main menu.
2 Move the cursor (z) to “PROGRAMME PRESET” with + ◊ or – √ and press
OK.
The PROGRAMME PRESET menu appears.
3 Move the cursor (z) to “MANUAL PROGRAMME” with + ◊ or – √ and
press OK.
The MANUAL PROGRAMME menu appears.
4 Using + ◊ or – √, move the cursor (z) to the programme position which
you want to manually fine-tune.
MANUAL PROGRAMME
PROG SYS BAND LABEL AFT
0 B / G V– L – – – – – ON
1 B / G V– H – – – – – ON
2 B / G UHF – – – – – ON
Se l ec t
a n d p r e s s OK
5 Press OK repeatedly until the AFT position turns red, then press + ◊ or – √
to select OFF.
6 Press OK.
The tuning bar turns red.
While holding down + ◊ or – √, the tuning bar flashes red and green by
turns, and the channel is fine-tuned. When the best TV reception is found,
release + ◊ or – √.
7 Press OK.
The cursor (z) appears. Now the fine-tuned level is stored.
8 Repeat steps 4 to 7 to fine-tune other channels.
9 Press MENU to go back to the original screen.
GB
Getting Started 11
11 Page |
Páginas | Total 30 Páginas | |
PDF Descargar | [ Datasheet KV-V1430P.PDF ] |
Número de pieza | Descripción | Fabricantes |
KV-V1430K | Trinitron Colour Video TV | Sony |
KV-V1430P | Trinitron Colour Video TV | Sony |
Número de pieza | Descripción | Fabricantes |
SLA6805M | High Voltage 3 phase Motor Driver IC. |
Sanken |
SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
Analog Devices |
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |