DataSheet.es    


PDF DCS800 Data sheet ( Hoja de datos )

Número de pieza DCS800
Descripción DC Drive Technical catalogue
Fabricantes ABB 
Logotipo ABB Logotipo



Hay una vista previa y un enlace de descarga de DCS800 (archivo pdf) en la parte inferior de esta página.


Total 28 Páginas

No Preview Available ! DCS800 Hoja de datos, Descripción, Manual

ABB DCS800 DC Drive
DCS800 20 A to 5200 A
Technical catalogue
PRODUCTS

1 page




DCS800 pdf
DCS800 Power Converter Modules
General
The power converter modules DCS800-S0x have the
protection class IP00 and are to be mounted in a cu-
bicle or finger protected area. There are different sizes
(D1, D2, D3, D4, D5, D6, D7), graduated in terms of
current and voltage ranges.
All units are equipped with control panel DCS 800PAN.
It can be snapped into place on the power converter
module or installed in the switchgear cubicle door by
means of a mounting kit.
Accessories such as external fuses, line reactors etc. are
also available, to compose a complete drive system.
All converter modules up to 525 V and 1000 A (D1...
D4) are equipped with field exciters.
The power section of the converters is available as
single (2-Q) bridge or double (4-Q) bridge. 4-Q drives
are required for regenative breaking. 4-Q drives can be
built by:
• Double (4-Q) armature bridge or
• Single (2-Q) armature bridge plus field converter
bridge with double bridge
The bridge type has an influence on the maximum out-
put voltage of the converter. See table below.
Reference variables
The voltage characteristics are shown in the table
beside. The DC voltage characteristics have been
calculated using the following assumptions:
• UVN = rated input terminal voltage, 3-phase
• Voltage tolerance ±10 %
• Internal voltage drop approx. 1%
• If a deviation or a voltage drop has to be taken
into consideration in compliance with IEC and
VDE standards, the output voltage or the output
current must be reduced by the actual factor
according to the table on the right.
Speed
max. regenerative
motor voltage
Motor
voltage
Torque
2-Q
4-Q
Current
2-Q
4-Q
System
connection
voltage
UVN
[V]
DC voltage Ideal DC Recommended
(recommended) voltage
without
load
DCS800
Voltage class
U Udmax 2-Q dmax 4-Q
Udi0
[V] [V]
[V]
230
380
400
415
440
460
480
500
525
575
600
660
690
800
990
1200
265
440
465
480
510
530
555
580
610
670
700
765
800
915
1160
1380
240
395
415
430
455
480
500
520
545
600
625
685
720
820
1040
1235
310
510
540
560
590
620
640
670
700
770
810
890
930
1060
1350
1590
04
04
04
04
05
05
05
05
06 *
06
06
07
07
08
10
12
* Sizes D1...D4 - voltage class 05 can be used
If armature voltages higher than recommended
are requested, please check carefully, whether
your system is still working under safe conditi-
ons.
The maximum output voltage of a 4-Q drive can be in-
creased up to the level of Udmax 2-Q if the torque reversal
time motor --> regenerative mode is increased up to
300 ms.
3ADW000192R0301 DCS800 Technical catalogue e c
5

5 Page





DCS800 arduino
Dimensioning
DriveSize
Quality dimensioning
DriveSize is for drive system components
DriveSize is a PC program for helping the user to
select an optimal converter and options, especially in
those cases where a straightforward selection from a
catalogue is not possible. Documents about the dimen-
sioning based on actual load.
The default values make DriveSize simple to use, but
the user is provided with many options for drive selec-
tion. The shortcut keys make drive selection easy while
still honouring the relatively complicated rules.
A manual selection mode is also supported.
DriveSize is currently used by more than 1000 engi-
neers globally.
• DCS converter modules
• DCS enclosed converters
• Group drives (line-ups)
• Drive options
DriveSize features
• Select an drive unit, incoming unit
• Calculate duty load cycles for converters
• Supply dimensioning results in graphical and nu-
merical format
• Print and save the results
3ADW000192R0301 DCS800 Technical catalogue e c
11

11 Page







PáginasTotal 28 Páginas
PDF Descargar[ Datasheet DCS800.PDF ]




Hoja de datos destacado

Número de piezaDescripciónFabricantes
DCS800Drives Quick GuideABB
ABB
DCS800DC Drive Technical catalogueABB
ABB
DCS800DC module Firmware ManualABB
ABB
DCS800Drives Hardware ManualABB
ABB

Número de piezaDescripciónFabricantes
SLA6805M

High Voltage 3 phase Motor Driver IC.

Sanken
Sanken
SDC1742

12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters.

Analog Devices
Analog Devices


DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares,
permitiéndote verlos en linea o descargarlos en PDF.


DataSheet.es    |   2020   |  Privacy Policy  |  Contacto  |  Buscar