|
|
PDF S50HW-XB02 Data sheet ( Hoja de datos )
| Número de pieza | S50HW-XB02 | |
| Descripción | Wide Plasma Display Module | |
| Fabricantes | Samsung | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de S50HW-XB02 (archivo pdf) en la parte inferior de esta página. Total 30 Páginas | ||
|
No Preview Available !
Global LCD Panel Exchange Center
www.panelook.com
FOR MESSRS:
SDI
TENTATIVE
DATE: Feb 24. 2004
TENTATIVE SPECIFICATIONS
1,269cm (50 Inch) Wide Plasma Display Module
MODEL : S50HW-XB02
(PAL/NTSC)
* This specification will be approved by both CUSTOMER and Samsung SDI Co.,Ltd.
* Please return one of this specification with your signature for approval.
Proposed by:
Approved by:
Signature
General Manager. Yeonyong Choo
Quality Innovation Team,
PDP ) Division,
Samsung SDI Co., Ltd
Signature
SAMSUNG SDI CO.,LTD.
.
CONFIDENTIAL
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
1 page  
Global LCD Panel Exchange Center
www.panelook.com
SamsungSDI Corporation
1. DESCRIPTION
Specification
Plasma Display Module
The S50HW-XDxx is a 50-inch wide full color plasma display Module with a resolution
of 1366(H) 768(V) pixels. The display module includes the Plasma Display
Panel(PDP), the Panel driving electronics, the Logic Control Board, and the
SMPS(PSU) . PSU consists of two pieces of board (main supply & image board supply).
2. FEATURES
• Wide aspect ratio(16:9) 42 inch diagonal display screen. The display area is
1106.46 wide and 622.08 high.
• Slim and light weight. The display Module is 63 (TBD) in depth and weight only
approx.30.0 exclusive of power supply.
• 16.77 million colors by combination of 8 bits R,G and B digital data
• High Luminance, High contrast, Wide viewing angle. The screen has a white peak
Luminance of typical 1,000 cd/ (TBD), contrast of typical 2,500:1(TBD) and a
viewing angle (of) greater than 160 comparable to those of CRTs.
3. PRODUCT NAME AND MODEL NUMBER
• Product name : 50-inch Full Color Plasma Display Module3
(abbreviation : PDP Module3)
• Model number : S50HW-XDxx
4. FUNCTION OUTLINE
• The plasma display Module has an APC(Automatic Power Control) function which
restricts power consumption within the certain value with regard to each display load
ratio.
• The plasma display Module is operated by following digital video signals; Vertical
synchronous signal, Horizontal synchronous signal, Enable signal and 8bits data signal
of each R,G, and B color. All signals are based on LVDS level.
• The plasma display Module is operated at 50Hz or 60Hz frame rate. An external frame
rate conversion is required in order to display the other formats.
• The plasma display Module requires 8 types of input power voltages; voltage for
LOGIC, voltage for TCP driver IC, voltage for gate driver, voltage for sustain, erase,
address, set and scan.
• The plasma display Module is operated at progressive signal only.
An external progressive scan conversion is required in order to display the other
formats.
• The plasma display Module requires rated 100~240V, 50~60Hz of input power voltage.
Maximum input voltage rating is AC 90~264V.
Samsung SDI Confidential
-5/5 - Plasma Display Module, Rev0.0 04/02/24
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
5 Page 
Global LCD Panel Exchange Center
www.panelook.com
SamsungSDI Corporation
Specification
6.5 Display Cell Defect Specification (TBD)
Plasma Display Module
In some cases, a panel may have defective cells that cannot be controlled.
These defective cells can be categorized into three types;
(1) Non-lighting cell defect : defect in which the cell is always off
(2) Non-extinguishing cell defect : defect in which the cell is always on.
(3) Flickering cell defect : defect in which the cell is flickering.
(4) Test Pattern : Full White, Full Red, Full Green and Full Blue with 255 gray level.
The display cell defect specifications define the allowed limits for display cell defects and
are used as the criteria in determining whether a panel should be shipped.
Specification
Item Number of cell defects
Continuous Cell defect
Zone A: 1 and less
Zone B: 1 and less
Non-lighting cell defect
Zone A: 4 and less
Zone B: 10 and less
Non-extinguishing cell defect
Zone A: 1 and less
Zone B: 3 and less
Flickering cell defect
Total defect
Zone A: 1 and less
Zone B: 3 and less
Total number of cell defects in Zone A and B
is 14 and less
6.6 Luminance Variation Specification
Samsung SDI Confidential
-11/11 -
Plasma Display Module, Rev0.0 04/02/24
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
11 Page | ||
| Páginas | Total 30 Páginas | |
| PDF Descargar | [ Datasheet S50HW-XB02.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| S50HW-XB02 | Wide Plasma Display Module | Samsung |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |