|
|
Número de pieza | PD70-01B-TR7 | |
Descripción | Silicon Planar PIN Photodiode | |
Fabricantes | Everlight Electronics | |
Logotipo | ||
Hay una vista previa y un enlace de descarga de PD70-01B-TR7 (archivo pdf) en la parte inferior de esta página. Total 8 Páginas | ||
No Preview Available ! Silicon Planar PIN Photodiode
PD70-01B/TR7
Features
․Daylight filter
․High sensitivity
․Low capacitance
․Short switching time
․Wide temperature range
․Small package
․Pb free
․The product itself will remain within RoHS compliant version.
Descriptions
‧The PD70-01B/TR7 is high sensitivity, fast switching times, low capacitance, compact size,
and lack of measurable degradation make it suitable for diverse applications, such as TV and
appliance remote control, IR sound transmission, video recorders, and measurement and
control.
Applications
․High speed photo detector
․Copier
․Elevator
Device Selection Guide
Part Category
Chip
Material
PD Silicon
Lens Color
Black
1 Copyright © 2013, Everlight All Rights Reserved. Release Date :6/20/2013. Issue No: DPD-0000162 Rev:3
www.everlight.com
Revision : 3
LifecyclePhase:
Release Date:2013-07-05 13:54:41.0
Expired Period: Forever
1 page Data Sheet
Silicon Planar PIN Photodiode
PD70-21B/TR7
Precautions For Use
1. Over-current-proof
Customer must apply resistors for protection , otherwise slight voltage shift will cause big
current change ( Burn out will happen ).
2. Storage
2.1 Do not open moisture proof bag before the products are ready to use.
2.2 Before opening the package, the LEDs should be kept at 30 or less and 90%RH or less.
2.3 The LEDs should be used within a year.
2.4 After opening the package, the LEDs should be kept at 30 or less and 60%RH or less.
2.5 The LEDs should be used within 168 hours (7 days) after opening the package.
2.6 If the moisture absorbent material (silica gel) has faded away or the LEDs have exceeded the
storage time, baking treatment should be performed using the following conditions.
Baking treatment : 60 5 for 24 hours.
3. Soldering Condition
3.1 Pb-free solder temperature profile
3.2 Reflow soldering should not be done more than two times.
3.3 When soldering, do not put stress on the LEDs during heating.
3.4 After soldering, do not warp the circuit board.
5 Copyright © 2013, Everlight All Rights Reserved. Release Date :6/20/2013. Issue No: DPD-0000162 Rev: 3
www.everlight.com
Revision : 3
LifecyclePhase:
Release Date:2013-07-05 13:54:41.0
Expired Period: Forever
5 Page |
Páginas | Total 8 Páginas | |
PDF Descargar | [ Datasheet PD70-01B-TR7.PDF ] |
Número de pieza | Descripción | Fabricantes |
PD70-01B-TR10 | Silicon Planar PIN Photodiode | Everlight Electronics |
PD70-01B-TR7 | Silicon Planar PIN Photodiode | Everlight Electronics |
Número de pieza | Descripción | Fabricantes |
SLA6805M | High Voltage 3 phase Motor Driver IC. |
Sanken |
SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
Analog Devices |
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |