|
|
PDF PDP42C4 Data sheet ( Hoja de datos )
| Número de pieza | PDP42C4 | |
| Descripción | WXGA PDP MODULE | |
| Fabricantes | LG | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de PDP42C4 (archivo pdf) en la parte inferior de esta página. Total 30 Páginas | ||
|
No Preview Available !
PDP Division, LG Electronics Inc.
Product Specification of PDP Module
CUSTOMER
APPROVAL
SPECIFICATION
(● ) Preliminary Specification
( ) Final Specification
Title PDP42C4#### (42”WXGA PDP MODULE)
Buyer Name
Model Name
PART No.
Supplier
Model Name
PART No.
LG Electronics Inc.
PDP42C4####
Signature / Date
Signature / Date
Approved by
Approved by
Please return 1 copy for our confirmation
with your signature
PDP CM Team,
TV Division, LG Electronics Inc.
Revision No. 1.0
Confidential
25/ July/ 2012
Page 1/45
1 page  
PDP Division, LG Electronics Inc.
Product Specification of PDP Module
CAUTION
General
1) Do not place this product in a location that is subject to heavy vibration, or on an unstable surface such as an
inclined surface. The product may fall off or fall over, causing injuries.
2) When moving the product, be sure to turn off the power and disconnect all the cables. While moving the
product, watch your step. The product may be dropped or fall, leading to injuries of electric shock.
3) Before disconnecting cable from the product, be sure to turn off the power. Be sure to hold the connector when
disconnecting cables. Pulling a cable with excessive force may cause the core of the cable to be exposed or
break the cable, and this can lead to fire or electric shock.
4) This product should be moved by two or more persons. If one person attempts to carry this product alone, he/she
may be injured.
5) This product contains glass. The glass may break, causing injuries, if shock, vibration, heat, or distortion is
applied to the product.
6) The temperature of the glass surface of the display may rise to 80C or more depending on the conditions of use.
If you touch the glass inadvertently, you may be burned.
7) Do not poke or strike the glass surface of the display with a hard object. The glass may break or be scratched. If
the glass breaks, you may be injured.
8) If you glass surface of the display breaks or is scratched, do not touch the broken pieces or the scratches with
bare hands. You may be injured.
9) Do not place an object on the glass surface of the display. The glass may break or be scratched.
Design
1) This product may be damaged if it is subject to excessive stresses (such as excessive voltage, current, or
temperature). The absolute maximum ratings specify the limits of these stresses, and system design must ensure
that none of the absolute maximum ratings are exceeded.
2) The recommended operating conditions are conditions in which the normal operation of this product is
guaranteed. All the rated values of the electrical specifications are guaranteed within these conditions. Always
use the product within the range of the recommended operating conditions. Otherwise, the reliability of the
product may be degraded. Use of the product with a combination of parameters, conditions, or logic not
specified in the specifications of this product is not guaranteed. If intending to use the product in such a way, be
sure to consult LGE in advance.
3) This product emits near infrared rays (800 to 1000nm) that may cause the remote controllers of other electric
products to malfunction. To avoid this, use an infrared absorption filter and thoroughly evaluate the system and
environment.
Revision No. 1.0
Confidential
25/ July/ 2012
Page 5/45
5 Page 
PDP Division, LG Electronics Inc.
Product Specification of PDP Module
CONDITIONS OF ACCEPTABILITY
Main Power supply
In order to supply the main power, the manufacturer of end-user products should adopt
suitable Main SMPS, DC/DC Converter which are equipped with OCP and OVP.
These characteristics of OCP and OVP should be as follows.
POINT
OCP
OVP
+ 5V
4.1 ~ 20
5.5 ~ 7.0
Va
2.1 ∼12
60 ~ 70
Vs
1.5 ∼ 6
215 ~ 240
- OCP ( Over current protection ): This functions to protect power supply or load from output
current applied in excess of limited value.
- OVP ( Over voltage protection): This functions to protect against output voltage exceeding
a fixed value and against over voltage load.
Insulation
- In order to use information technology equipment or audio/video apparatus, the end-user product
should satisfy the insulation and material requirements on Safety Standards of IEC 60950-1, EN
60950-1, UL60950-1 and CSA C22.2 No. 60950-1, or IEC 60065, EN 60065, UL 6500 and
CAN/CSA-E60065(CSA C22.2 No. 60065)
Additional requirements
- Proper fire enclosure
- Proper mechanical enclosure
- safety test including Power Supply Board should be preformed as a part of the end-user product
investigation.
Revision No. 1.0
Confidential
25/ July/ 2012
Page 11/45
11 Page | ||
| Páginas | Total 30 Páginas | |
| PDF Descargar | [ Datasheet PDP42C4.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| PDP42C4 | WXGA PDP MODULE | LG |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |