Datenblatt-pdf.com


WJ-SX550C Schematic ( PDF Datasheet ) - Panasonic

Teilenummer WJ-SX550C
Beschreibung System 500 Matrix Switcher Operating Instructions
Hersteller Panasonic
Logo Panasonic Logo 




Gesamt 30 Seiten
WJ-SX550C Datasheet, Funktion
System 500 Matrix Switcher
Operating Instructions
Matrix Switcher
Model No. WJ-SX550C
System Controller
Model No. WV-CU550CJ
ALARM
BUSY
1 AUX
2
REASCEKT
SBEAQCK FSOERQWARDALT
7 4 18 5 29 6 3-1CDAEMC
INC
+1CAM
STOP
F1
F2
SLOW
0MON
CAM
ESC
F3
F4
RESET
CLOSEIRIOSPEN
AF
TEZOLEOM
NFEOACRUS
SET
WIDE
FAR
550System Controller WV-CU
CJ
Before attempting to connect or operate this product,
please read these instructions carefully and save this manual for future use.






WJ-SX550C Datasheet, Funktion
HOW TO USE THIS MANUAL
The purpose of this manual is to provide step-by-step instructions for setting up and operating a Matrix System 500. If a Matrix
Switcher is new to you, it is highly recommended that you read through this manual. If you are already familiar with the Matrix
Switcher, you may skip Sections 1 and 2 and start from Section 3, Installations and System Connections. The contents of each
section of this manual are summarized below.
Section 1.
Features of the System 500 Matrix Switcher
Describes the main features of the System 500.
Numerous illustrations provide easy-to-understand explanations.
Section 2.
Detailed Product Description and Selection
Operating controls and their functions are explained in this section.
Also, in-depth information about each board is given here, along with details about proper board setup.
A table is included here that specifies how many optional boards are required for every possible system
expansion.
Section 3.
Installation and System Connections
Information about cable connections between the Matrix Switcher and System Controllers, cameras, monitors
and peripheral devices is provided here.
Section 4.
Software Setup
Step-by-step procedures for successful initial programming of the system are explained in this section.
Graphical representations of the various setup tables are also provided.
This section is very important as proper programming of the system is vital for customizing the system to the
end user’s requirements.
Section 5.
Operating Procedures
After system programming, normal operation of the system on a daily basis is done by following the steps
outlined in this section.
Section 6.
Troubleshooting
Most of the problems in a Matrix System can be traced to faulty hardware or software setup.
This section is invaluable as an aid in identifying the sources of common problems. Reading this section
before requesting service will save you time in resolving those problems.
Section 7. Specifications
6

6 Page









WJ-SX550C pdf, datenblatt
Group Sequence
A Group Sequence consists of up to 64 steps.
In each step, a maximum of 16 cameras can be assigned to 16 monitors.
Pan/Tilt preset and Auxiliary control (1 & 2) can also be set for each camera/monitor combination.
Camera view switching (Dwell Time) for each step can be set from 1 second to 30 seconds in 1-second increments.
There are 8 Group Sequences available, with programming performed on the Set Up Menu.
4th Floor
C 13 C 14 C 15 C 16 CAM 13 CAM 14 CAM 15 CAM 16
1 3rd Floor
C 9 C 10 C 11 C 12 CAM 9 CAM 10 CAM 11 CAM 12
2nd Floor
C 5 C 6 C 7 C 8 CAM 5 CAM 6 CAM 7 CAM 8
1st Floor
C 1 C 2 C 3 C 4 CAM 1 CAM 2 CAM 3 CAM 4
Group Sequence
Monitor 1 Monitor 2 Monitor 3 Monitor 4
Timer Event
The timer function is used to program and automatically activate Tour or Group Sequences according to the time of day, day
of week and 5 user defined special days.
There are 45 timer events available in one day.
Alarm Control
Alarm Input
There are 2 kinds of alarm inputs available in the system.
• Camera Site Alarm
This alarm signal is supplied from the associated camera site receiver or camera.
Receivers capable of camera site alarm input are models WV-RC100, WV-RC150 and WV-RC170.
• Interface Alarm
This alarm signal is supplied from the Alarm Input (ALARM IN) Connector on the optional Alarm Boards installed in the WJ-
SX550C Matrix Switcher.
Up to 128 alarm inputs are available.
• Alarm Operation Modes
There are three alarm operation modes available in the WJ-SX550C Matrix Switcher.
The alarm modes can be switched according to the time programmed on an internal timer.
12

12 Page





SeitenGesamt 30 Seiten
PDF Download[ WJ-SX550C Schematic.PDF ]

Link teilen




Besondere Datenblatt

TeilenummerBeschreibungHersteller
WJ-SX550CSystem 500 Matrix Switcher Operating InstructionsPanasonic
Panasonic

TeilenummerBeschreibungHersteller
CD40175BC

Hex D-Type Flip-Flop / Quad D-Type Flip-Flop.

Fairchild Semiconductor
Fairchild Semiconductor
KTD1146

EPITAXIAL PLANAR NPN TRANSISTOR.

KEC
KEC


www.Datenblatt-PDF.com       |      2020       |      Kontakt     |      Suche