|
|
Número de pieza | S6310MG | |
Descripción | Infrared Laser Diode | |
Fabricantes | Roithner LaserTechnik | |
Logotipo | ||
Hay una vista previa y un enlace de descarga de S6310MG (archivo pdf) en la parte inferior de esta página. Total 5 Páginas | ||
No Preview Available ! S6310MG
TECHNICAL DATA
Infrared Laser Diode
Features
• Lasing Mode Structure: single mode
• Peak Wavelength : typ. 635 nm
• Optical Ouput Power: 10 mW
• Package: 5.6 mm
Electrical Connection
Pin Configuration
n-type
PIN Function
1 LD Cathode
2 LD Anode, PD Cathode
3 PD Anode
Bottom View
Absolute Maximum Ratings (TC=20°C)
Item
CW Output Power
LD Reverse Voltage
PD Reverse Voltage
Operating Case Temperature
Storage Temperature
Symbol
PO
Vr
VrPD
TC
Tstg
Value
12
2
30
-10 … +50
-15 … +85
Unit
mW
V
V
°C
°C
Specifications (TC=20°C)
Item
Optical Specifications
CW Output Power
Center Wavelength
FWHM Beam Divergence
Electrical Specifications
Threshold Current
Operating Current
Slope Efficiency
Operating Voltage
Monitor Current
Symbol
PO
λC
θ║
θ┴
Ith
Iop
η
Uop
Im
Min.
-
630
6
28
-
-
0.3
-
0.05
Typ.
10
638
8
33
30
45
0.6
2.2
0.15
Max.
-
642
12
37
40
60
-
2.6
0.4
Unit
mW
nm
deg
deg
mA
mA
mW/mA
V
mA
The above specifications are for reference purpose only and subjected to change without prior notice.
23.09.2010
S6310MG
1 of 5
1 page Safety of Laser light
• Laser Light can damage the human eyes and skin. Do not expose the
eye or skin directly to any laser light and/or through optical lens. When
handling the LDs, wear appropriate safety glasses to prevent laser
light, even any reflections from entering to the eye. Focused laser
beam through optical instruments will increase the chance of eye
hazard.
Cautions
1. Operating methode
• This LD shall change its forward voltage requirement and optical ouput power according to
temperature change. Also, the LD will require more operation current to maintain same ouput
power as it degrades. In order to maintain output power, use of APC (Automatic Power
Control) is recommended. Which use monitor feedback to adjust the operation current.
• Confirm that electrical spike current generated by swithing on and off does not exceed the
maximum operating current level specified herein above as absolute maximum rating. Also,
employ appropriat countermeasures to reduce chattering and/or overshooting in the circuit.
2. Static Electricity
• Static electricity or electrical surges will reduce and degrade the reliability of the LDs. It is
recommended to use a wrist trap or anti-electrostatic glove when handeling the product.
3. Absolute Maximum Rating
• Active layer of LDs shall have high current density and generate high electric field during its
operation. In order to prevent excessive damage, the LD must be operated striclty below
absolute maximum rating.
23.09.2010
S6310MG
5 of 5
5 Page |
Páginas | Total 5 Páginas | |
PDF Descargar | [ Datasheet S6310MG.PDF ] |
Número de pieza | Descripción | Fabricantes |
S6310MG | Infrared Laser Diode | Roithner LaserTechnik |
Número de pieza | Descripción | Fabricantes |
SLA6805M | High Voltage 3 phase Motor Driver IC. |
Sanken |
SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
Analog Devices |
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |