|
|
PDF G154IJE-L02 Data sheet ( Hoja de datos )
| Número de pieza | G154IJE-L02 | |
| Descripción | TFT LCD Module | |
| Fabricantes | INNOLUX | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de G154IJE-L02 (archivo pdf) en la parte inferior de esta página. Total 27 Páginas | ||
|
No Preview Available !
PRODUCT SPECIFICATION
□ Tentative Specification
□ Preliminary Specification
■ Approval Specification
MODEL NO.: G154IJE
SUFFIX: L02
Customer:
APPROVED BY
SIGNATURE
Name / Title
Note
Please return 1 copy for your confirmation with your
signature and comments.
Approved By
yuhsiang.chang
(張喻翔/514-10922)
2014-01-15
18:02:14 CST
Checked By
yuhsiang.chang
(張喻翔/514-10922)
2014-01-15
18:02:14 CST
Prepared By
thurston.lin
(林群祥/514-10927)
2014-01-15
17:57:04 CST
1 / 26
Version 2.4
1 page  
PRODUCT SPECIFICATION
2. ABSOLUTE MAXIMUM RATINGS
2.1 ABSOLUTE RATINGS OF ENVIRONMENT
Item
Operating Ambient Temperature
Storage Temperature
Symbol
TOP
TST
Value
Min. Max.
-10 +70
-20 +80
Note (1): Temperature and relative humidity range is shown in the figure below.
(a) 90 %RH Max. (Ta < 40 ºC).
(b) Wet-bulb temperature should be 39 ºC Max. (Ta < 40 ºC).
(c) No condensation.
Note (2)
Unit Note
ºC (1), (2)
ºC (1)
Note (3) 1 time for ± X, ± Y, ± Z. for Condition (25G / 6ms) is half Sine Wave,.
Note (4) 5- 9Hz: 3,5mm amplitude 9- 500Hz: 1g- each 10 cycles / axis (X,Y,Z); 1 octave / min.
Note (5) At testing Vibration and Shock, the fixture in holding the module has to be hard and rigid
enough so that the module would not be twisted or bent by the fixture.
The fixing condition is shown as below:
At room Temperature
Side Mount Fixing
Gap=2mm
LCD Module
Bracket
Side Mount Fixing
Stage
5 / 26
Version 2.4
5 Page 
PRODUCT SPECIFICATION
5. INPUT TERMINAL PIN ASSIGNMENT
5.1 TFT LCD MODULE
Pin Name
1 12V
2 12V
3 12V
4 12V
5 ENLED
6 Dimming
7 GND
8 GND
9 VCC
10 VCC
11 GND
12 GND
13 RX0-
14 RX0+
15 GND
16 RX1-
17 RX1+
18 GND
19 RX2-
20 RX2+
21 GND
22 RXCLK-
23 RXCLK+
24 GND
25 RX3-
26 RX3+
27 GND
28 SEL6/8
29 GND
30 GND
Description
LED Power supply
LED Power supply
LED Power supply
LED Power supply
Enable Pin
Backlight Adjust
Ground
Ground
Power supply +3.3V
Power supply +3.3V
Ground
Ground
Differential Data Input, CH0 (Negative )
Differential Data Input, CH0 ( Positive )
Ground
Differential Data Input, CH1 ( Negative )
Differential Data Input , CH1 ( Positive )
Ground
Differential Data Input , CH2 ( Negative )
Differential Data Input , CH2 ( Positive )
Ground
Differential Clock Input ( Negative )
Differential Clock Input ( Positive )
Ground
Differential Data Input, CH3 (Negative )
Differential Data Input, CH3 ( Positive )
Ground
LVDS 6/8 bit select function control,
Low or NC 6 bit Input Mode
High 8 bit Input Mode
GND
Ground
Remark
LED converter power
System power
B2~B5, DE, Hsync, Vsync
LVDS Level Clock
(2)
Note (1) Connector Part No.: STARCONN 093G30-B1001A-G4 or equivalent.
Note (2) “Low” stands for 0V. “High” stands for 3.3V. “NC” stands for “No Connected”.
11 / 26
Version 2.4
11 Page | ||
| Páginas | Total 27 Páginas | |
| PDF Descargar | [ Datasheet G154IJE-L02.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| G154IJE-L02 | TFT LCD Module | INNOLUX |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |