Datenblatt-pdf.com


EM200 Schematic ( PDF Datasheet ) - Tibbo Technology

Teilenummer EM200
Beschreibung Ethernet Module
Hersteller Tibbo Technology
Logo Tibbo Technology Logo 




Gesamt 7 Seiten
EM200 Datasheet, Funktion
EM200 Ethernet Module
The EM200 is an Ethernet Module for onboard installation. Module hardware includes
one 100BaseT Ethernet port (standard Ethernet magnetics are NOT integrated into
the Module), one serial port (CMOS-level) with a number of additional general-
purpose I/O lines, and an internal processor, whose firmware acts as a bridge
between the Ethernet and serial ports. Ethernet "side" of the Module connects
directly to a standard Ethernet magnetics circuit (such as YCL-PH163112) or RJ45
connector with integrated magnetics. Serial "side" interfaces directly to the serial
port pins of most microcontrollers, microprocessors, UARTs, etc.
From the hardware standpoint, the EM200 can be viewed as a universal platform
suitable for running a variety of network and serial communications-related
applications. It is the application firmware, not hardware that gives the EM200 most
of its functionality.
The Application firmware EM200 is supplied with, currently in its 3rd generation
("Release3"), turns the EM200 into a Serial Device Server used to connect serial
devices to the Ethernet (TCP/IP) networks.
The application firmware of the EM200 can be upgraded through the module's serial
port or Ethernet port. Serial upgrades are facilitated by a so-called Monitor- a fixed
"service" firmware inside the EM200. The Monitor cannot be upgraded. Network
upgrades rely on the application firmware itself- there is a self upgrade algorithm
that will be detailed later.
Since most of the EM200's operation is defined by its firmware the major part of the
EM200's functional description can be found in the
Device Server Application Firmware Manual. This EM200 Ethernet Module Manual
focuses on the hardware portion of the EM200.
©2000-2004 Tibbo Technology Inc.






EM200 Datasheet, Funktion
Mechan2i.c1a.l4.d2imensions
Hardware Manuals 28
L Max. 32.1
W Max. 18.5
H Max. 7.3
I Min. 2.2
m Max. 0.5
d Aver. 28.0
p Aver. 1.27
Module length
Module width
Module height
Lead length
Lead "flash"
Distance between lead rows
Pin pitch
All dimensions are in millimeters
Specifi2ca.1ti.o4n.3s and EM200 modifications
The EM200 has one submodel in circulation- EM200-00.
Device specifications are presented in the table below.
Parameter
EM200-00
Ethernet interface
10/100BaseT Ethernet, magnetics not built-in
Serial interface and I/O lines
Routing buffers size
CMOS-level; TX, RX, and 9 additional I/O lines
with RTS, CTS, DTR, DSR implemented in
application firmware
12Kbytes x 2*
Maximum load current of I/O lines 10mA
Power requirements
DC 5V, +/- 5%, app. 220mA
Device temperature during operation +55 degrees C** (in 100BaseT mode)
Operating temperature
-10 to +70 degrees C
Operating relative humidity
10-90%
Mechanical dimensions (excl. leads) App. 32.1x18.5x7.3mm
Packing
Plastic tray, 50 modules/tray
©2000-2004 Tibbo Technology Inc.

6 Page







SeitenGesamt 7 Seiten
PDF Download[ EM200 Schematic.PDF ]

Link teilen




Besondere Datenblatt

TeilenummerBeschreibungHersteller
EM200Ethernet ModuleTibbo Technology
Tibbo Technology

TeilenummerBeschreibungHersteller
CD40175BC

Hex D-Type Flip-Flop / Quad D-Type Flip-Flop.

Fairchild Semiconductor
Fairchild Semiconductor
KTD1146

EPITAXIAL PLANAR NPN TRANSISTOR.

KEC
KEC


www.Datenblatt-PDF.com       |      2020       |      Kontakt     |      Suche