Datenblatt-pdf.com


GA-H61M-USB3V Schematic ( PDF Datasheet ) - GIGABYTE

Teilenummer GA-H61M-USB3V
Beschreibung Motherboard User Manual
Hersteller GIGABYTE
Logo GIGABYTE Logo 




Gesamt 30 Seiten
GA-H61M-USB3V Datasheet, Funktion
GA-H61M-USB3V
User's Manual
Rev. 1001
12ME-61MUB3V-1001R






GA-H61M-USB3V Datasheet, Funktion
Chapter 1 Hardware Installation
1-1 Installation Precautions
The motherboard contains numerous delicate electronic circuits and components which can become
damaged as a result of electrostatic discharge (ESD). Prior to installation, carefully read the user's
manual and follow these procedures:
• Prior to installation, make sure the chassis is suitable for the motherboard.
• Prior to installation, do not remove or break motherboard S/N (Serial Number) sticker or
warranty sticker provided by your dealer. These stickers are required for warranty validation.
• Always remove the AC power by unplugging the power cord from the power outlet before
installing or removing the motherboard or other hardware components.
• When connecting hardware components to the internal connectors on the motherboard, make
sure they are connected tightly and securely.
• When handling the motherboard, avoid touching any metal leads or connectors.
• It is best to wear an electrostatic discharge (ESD) wrist strap when handling electronic
components such as a motherboard, CPU or memory. If you do not have an ESD wrist strap,
keep your hands dry and first touch a metal object to eliminate static electricity.
• Prior to installing the motherboard, please have it on top of an antistatic pad or within an
electrostatic shielding container.
• Before unplugging the power supply cable from the motherboard, make sure the power supply
has been turned off.
• Before turning on the power, make sure the power supply voltage has been set according to
the local voltage standard.
• Before using the product, please verify that all cables and power connectors of your hardware
components are connected.
• To prevent damage to the motherboard, do not allow screws to come in contact with the
motherboard circuit or its components.
• Make sure there are no leftover screws or metal components placed on the motherboard or
within the computer casing.
• Do not place the computer system on an uneven surface.
• Do not place the computer system in a high-temperature environment.
• Turning on the computer power during the installation process can lead to damage to system
components as well as physical harm to the user.
• If you are uncertain about any installation steps or have a problem related to the use of the
product, please consult a certified computer technician.
-6-

6 Page









GA-H61M-USB3V pdf, datenblatt
1/2) ATX_12V/ATX (2x2 12V Power Connector and 2x12 Main Power Connector)
With the use of the power connector, the power supply can supply enough stable power to all the components
on the motherboard. Before connecting the power connector, first make sure the power supply is turned
off and all devices are properly installed. The power connector possesses a foolproof design. Connect the
power supply cable to the power connector in the correct orientation.
The 12V power connector mainly supplies power to the CPU. If the 12V power connector is not connected,
the computer will not start.
To meet expansion requirements, it is recommended that a power supply that can withstand high power consumption
be used (500W or greater). If a power supply is used that does not provide the required power, the result can
lead to an unstable or unbootable system.
ATX_12V:
Pin No. Definition
21
1 GND
43
2 GND
ATX_12V
3 +12V
4 +12V
ATX:
12 24
1 13
ATX
Pin No.
1
2
3
4
5
6
7
8
9
10
11
12
Definition
Pin No.
3.3V 13
3.3V 14
GND 15
+5V 16
GND 17
+5V 18
GND 19
Power Good
20
5VSB (stand by +5V)
21
+12V 22
+12V (Only for 2x12-pin
ATX)
3.3V (Only for 2x12-pin
ATX)
23
24
Definition
3.3V
-12V
GND
PS_ON (soft On/Off)
GND
GND
GND
-5V
+5V
+5V
+5V (Only for 2x12-pin ATX)
GND (Only for 2x12-pin ATX)
3/4) CPU_FAN/SYS_FAN (Fan Headers)
The motherboard has a 4-pin CPU fan header (CPU_FAN) and a 4-pin system fan header (SYS_FAN).
Most fan headers possess a foolproof insertion design. When connecting a fan cable, be sure to connect it
in the correct orientation (the black connector wire is the ground wire). The speed control function requires
the use of a fan with fan speed control design. For optimum heat dissipation, it is recommended that a
system fan be installed inside the chassis.
1 CPU_FAN/SYS_FAN:
Pin No. Definition
1 GND
CPU_FAN
2 +12V
3 Sense
1 4 Speed Control
SYS_FAN
• Be sure to connect fan cables to the fan headers to prevent your CPU and system from overheating. Overheating
may result in damage to the CPU or the system may hang.
These fan headers are not configuration jumper blocks. Do not place a jumper cap on the headers.
- 12 -

12 Page





SeitenGesamt 30 Seiten
PDF Download[ GA-H61M-USB3V Schematic.PDF ]

Link teilen




Besondere Datenblatt

TeilenummerBeschreibungHersteller
GA-H61M-USB3VMotherboard User ManualGIGABYTE
GIGABYTE

TeilenummerBeschreibungHersteller
CD40175BC

Hex D-Type Flip-Flop / Quad D-Type Flip-Flop.

Fairchild Semiconductor
Fairchild Semiconductor
KTD1146

EPITAXIAL PLANAR NPN TRANSISTOR.

KEC
KEC


www.Datenblatt-PDF.com       |      2020       |      Kontakt     |      Suche