Datenblatt-pdf.com


ACS754LCB-050-PSS Schematic ( PDF Datasheet ) - Allegro MicroSystems

Teilenummer ACS754LCB-050-PSS
Beschreibung Hall Effect-Based Linear Current Sensor IC
Hersteller Allegro MicroSystems
Logo Allegro MicroSystems Logo 




Gesamt 11 Seiten
ACS754LCB-050-PSS Datasheet, Funktion
www.DataSheet4U.com
Current Sensor: ACS754xCB-050
5
Package CB-PFF
4
1 23
Package CB-PSF
5
4
1 23
5
Package CB-PSS
4
1
23
Pin 1: VCC
Pin 2: GND
Pin 3: VOUT
Terminal 4: IP+
Terminal 5: IP–
ABSOLUTE MAXIMUM RATINGS
Supply Voltage, VCC .......................................... 16 V
Reverse Supply Voltage, VRCC ........................ –16 V
Output Voltage, VOUT ........................................ 16 V
Reverse Output Voltage, VROUT...................... –0.1 V
Output Current Source, IOUT(Source) ................. 3 mA
Output Current Sink, IOUT(Sink).......................10 mA
Operating Temperature,
Ambient, TA, L range ..................... –40 to 150ºC
Ambient, TA, S range ....................... –20 to 85ºC
Maximum Junction, TJ(max)............................. 165°C
Maximum Storage Temperature, TS .... –65 to 170°C
TÜV America
Certicate Number:
U8V 04 11 54214 001
The Allegro ACS75x family of current sensors provides economical and
precise solutions for current sensing in industrial, automotive, commercial, and
communications systems. The device package allows for easy implementation
by the customer. Typical applications include motor control, load detection and
management, power supplies, and overcurrent fault protection.
The device consists of a precision, low-offset linear Hall sensor circuit with a
copper conduction path located near the die. Applied current owing through
this copper conduction path generates a magnetic eld which is sensed by the
integrated Hall IC and converted into a proportional voltage. Device accuracy
is optimized through the close proximity of the magnetic signal to the Hall
transducer. A precise, proportional voltage is provided by the low-offset, chopper-
stabilized BiCMOS Hall IC, which is programmed for accuracy at the factory.
The output of the device has a positive slope (>VCC/ 2) when an increasing
current ows through the primary copper conduction path (from terminal 4 to
terminal 5), which is the path used for current sensing. The internal resistance of
this conductive path is typically 100 µ, providing low power loss. The thickness
of the copper conductor allows survival of the device at up to 5× overcurrent
conditions. The terminals of the conductive path are electrically isolated from the
sensor leads (pins 1 through 3). This allows the ACS75x family of sensors to be
used in applications requiring electrical isolation without the use of opto-isolators
or other costly isolation techniques.
The device is fully calibrated prior to shipment from the factory. The ACS75x
family is lead-free. All leads are coated with 100% matte tin, and there is no lead
inside the package. The heavy gauge leadframe is made of oxygen-free copper.
Features and Benets
• Monolithic Hall IC for high reliability
• Single +5 V supply
• 3 kVRMS isolation voltage between terminals 4/5 and pins 1/2/3
• 35 kHz bandwidth
• Automotive temperature range
• End-of-line factory-trimmed for gain and offset
• Ultra-low power loss: 100 µinternal conductor resistance
• Ratiometric output from supply voltage
• Extremely stable output offset voltage
• Small package size, with easy mounting capability
• Output proportional to ac and dc currents
Applications
• Automotive systems
• Industrial systems
• Motor control
• Servo systems
• Power conversion
• Battery monitors
Use the following complete part numbers when ordering:
Part Number
ACS754LCB-050-PFF
ACS754LCB-050-PSF
ACS754LCB-050-PSS
ACS754SCB-050-PFF
ACS754SCB-050-PSF
ACS754SCB-050-PSS
Signal Pins
Formed
Formed
Straight
Formed
Formed
Straight
Terminals
Formed
Straight
Straight
Formed
Straight
Straight
Ambient
–40 to 150°C
–20 to 85°C
ACS754050-DS, Rev. 3
115 Northeast Cutoff, Box 15036
Worcester, Massachusetts 01615-0036 (508) 853-5000






ACS754LCB-050-PSS Datasheet, Funktion
www.DataSheet4U.com
Current Sensor: ACS754xCB-050
Typical Percentage Error versus Ambient Temperature
6
4
2
0
–2
–4
–6
+ 3 Sigma
Mean
–8 – 3 Sigma
–10
-40 -20 0 25 55 70 85 125 150
TA (°C)
ACS754050-DS, Rev. 3
115 Northeast Cutoff, Box 15036
Worcester, Massachusetts 01615-0036 (508) 853-5000
6

6 Page







SeitenGesamt 11 Seiten
PDF Download[ ACS754LCB-050-PSS Schematic.PDF ]

Link teilen




Besondere Datenblatt

TeilenummerBeschreibungHersteller
ACS754LCB-050-PSFHall Effect-Based Linear Current Sensor ICAllegro MicroSystems
Allegro MicroSystems
ACS754LCB-050-PSSHall Effect-Based Linear Current Sensor ICAllegro MicroSystems
Allegro MicroSystems

TeilenummerBeschreibungHersteller
CD40175BC

Hex D-Type Flip-Flop / Quad D-Type Flip-Flop.

Fairchild Semiconductor
Fairchild Semiconductor
KTD1146

EPITAXIAL PLANAR NPN TRANSISTOR.

KEC
KEC


www.Datenblatt-PDF.com       |      2020       |      Kontakt     |      Suche