Datenblatt-pdf.com


GT5-2PP-HU Schematic ( PDF Datasheet ) - Hirose Electric

Teilenummer GT5-2PP-HU
Beschreibung Coaxial cable connection of Antennas/ Sensors/ and Communication Trunk Lines
Hersteller Hirose Electric
Logo Hirose Electric Logo 




Gesamt 21 Seiten
GT5-2PP-HU Datasheet, Funktion
Coaxial cable connection of Antennas, Sensors, and Communication Trunk Lines
SAE/USCAR-19
Termination of coaxial cables in automotive, medical and instrumentation applications
utilizes a single motion to crimp the center conductor, shield and outer insulation.
GT5 Series
— Connectors for coaxial cables —
<Several types and configurations: In-line, board mounted, combinations of
>coaxial cable with signal/power, Multi-position and color/ keying variations.
Features
USCAR Standard titled "Square Outer Conductor (SAE/USCAR-19)" excludes Water Proof type (GT5W)
Cost efficient termination
Highly efficient and reliable single motion "Twin Crimp TM " termination allows high volume production with
semi-automatic equipment.
Space-saving Design
Lock-release latching system
Shock / vibration resistant electrical connections
Verification of the full contact insertion
Color and polarizing variations
Excellent High Frequency Performance
Refer to V.S.W.R. data on the following pages.
Applications
In-car communication, car sensors (temperature, pressure), automotive audio systems, GPS antenna systems,
RACS antenna audio/video antenna systems, CRT displays, medical and measuring instrumentation, variety of
communication equipment, office automation equipment, LAN systems.
*"Twin Crimp "is a registered trade mark of Hirose Electric.
27






GT5-2PP-HU Datasheet, Funktion
Housings
[ ]Panel mounting, enhanced
shielding configuration
BRecommended Panel Cut-out
BMounted and fully mated connector
assemblies
Part Number
CL No.
Part
Material
Finish
GT5A-1PP-HU
755-0025-7
Housing
Ground terminal
PBT
Brass
Color: Light gray
Tin plating
Note 1: Terminal extraction tool: GT-PO(A)
Note 2: Retainer is optional.
Note 3: Use mounting screws of M3 with nominal diameter 3L-6 (for a panel thickness of 1.6 mm).
Panel
thickness:1.6
M3
BRecommended Panel Cut-out
Part Number
CL No.
Part
Material
Finish
GT5P-1PP-HU
755-0030-7
Housing
Ground terminal
PBT
Brass
Color: Light gray
Tin plating
Note 1: Terminal extraction tool: GT-PO(A)
Note 2: Retainer is optional.
Note 3: Use mounting screws of M3 with nominal diameter 3L-6 (for a panel thickness
of 1.6 mm).
32
BMounted and fully mated
connectorassemblies
Panel
thickness:1.6
1

6 Page









GT5-2PP-HU pdf, datenblatt
Combinaton Type (Two Single-Conductor Coaxial Cables + One Power contact)
F Connectors
BShown with inserted retainer.
Housing
Retainer
Part Number
CL No.
Material
Color
GT5-2/1S-HU
755-0009-0
PBT
Light gray
Note 1:Terminal extraction tool: GT-PO(A)
Note 2: Used with separate retainer (GT5-2/1S-R).
Retainer (exclusively for GT5-2/1S-HU)
Part Number
GT5-2/1S-R
CL No.
755-0003-4
Material
PBT
Color
Dark gray
M Connectors
Connector assembly, Printed
Circuit Board mounting
BRecommended Board Mounting Pattern
For power supply
For inner conductor
For outside conductor
Thickness :
1.6mm
BRecommended Panel Cut-out
Part
Material
Finish
Part Number
GT5-2/1P-DS
CL No.
755-0014-0
Housing
0. 64x1.1 Terminal
Insulator
Outer terminal
Tub terminal for DS 070
PBT Color: Light gray
Brass
Tin plating
PBT Dark gray
Phosphor bronze Tin plating
Brass
Tin plating
Note: Use mounting screws of M3 with nominal diameter 3L-6 (for a board thickness of 1.6 mm).
38
Board

12 Page





SeitenGesamt 21 Seiten
PDF Download[ GT5-2PP-HU Schematic.PDF ]

Link teilen




Besondere Datenblatt

TeilenummerBeschreibungHersteller
GT5-2PP-HUCoaxial cable connection of Antennas/ Sensors/ and Communication Trunk LinesHirose Electric
Hirose Electric
GT5-2PP-HUACoaxial cable connection of Antennas/ Sensors/ and Communication Trunk LinesHirose Electric
Hirose Electric
GT5-2PP-HUBCoaxial cable connection of Antennas/ Sensors/ and Communication Trunk LinesHirose Electric
Hirose Electric
GT5-2PP-HUCCoaxial cable connection of Antennas/ Sensors/ and Communication Trunk LinesHirose Electric
Hirose Electric

TeilenummerBeschreibungHersteller
CD40175BC

Hex D-Type Flip-Flop / Quad D-Type Flip-Flop.

Fairchild Semiconductor
Fairchild Semiconductor
KTD1146

EPITAXIAL PLANAR NPN TRANSISTOR.

KEC
KEC


www.Datenblatt-PDF.com       |      2020       |      Kontakt     |      Suche