|
|
Número de pieza | ABI-028-12-RC | |
Descripción | Electromechanical Indicator | |
Fabricantes | pro-SIGNAL | |
Logotipo | ||
Hay una vista previa y un enlace de descarga de ABI-028-12-RC (archivo pdf) en la parte inferior de esta página. Total 1 Páginas | ||
No Preview Available ! ABI 028-12-RC Electromechanical
Indicator
Features:
• Colour
: Black.
• Housing material
: ABS.
• Low frequency range.
• Flange mounted with wire leads.
• All data at 25ºC unless otherwise specified.
Tolerance : ±0.5mm
Dimensions : Millimetres
Specifications
ABI 028-12-RC
Rated voltage
12V dc
Operating voltage
9 to 15V dc
Rated current*
≤25mA/12V dc
Sound output at 20cm*
≥75dB/6V dc
Resonant frequency
400 ±100Hz
Tone
Continuous
Operating temperature
-10 to +60ºC
Storage temperature
-10 to +70ºC
Weight
10g
Note : *Value applying at rated voltage (DC)
Part Number Table
Description
Part Number
Indicator, Audio
ABI-028-12-RC
Disclaimer This data sheet and its contents (the "Information") belong to the Premier Farnell Group (the "Group") or are licensed to it. No licence is granted for the use of it other than for information purposes
in connection with the products to which it relates. No licence of any intellectual property rights is granted. The Information is subject to change without notice and replaces all data sheets previously supplied.
The Information supplied is believed to be accurate but the Group assumes no responsibility for its accuracy or completeness, any error in or omission from it or for any use made of it. Users of this data
sheet should check for themselves the Information and the suitability of the products for their purpose and not make any assumptions based on information included or omitted. Liability for loss or damage
resulting from any reliance on the Information or use of it (including liability resulting from negligence or where the Group was aware of the possibility of such loss or damage arising) is excluded.
This will not operate to limit or restrict the Group's liability for death or personal injury resulting from its negligence. SPC pro-SIGNAL is the registered trademark of the Group. © Premier Farnell plc 2010.
http://www.farnell.com
http://www.newark.com
http://www.cpc.co.uk
Page 1
22/07/10 V1.0
1 page |
Páginas | Total 1 Páginas | |
PDF Descargar | [ Datasheet ABI-028-12-RC.PDF ] |
Número de pieza | Descripción | Fabricantes |
ABI-028-12-RC | Electromechanical Indicator | pro-SIGNAL |
Número de pieza | Descripción | Fabricantes |
SLA6805M | High Voltage 3 phase Motor Driver IC. |
Sanken |
SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
Analog Devices |
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |