Datenblatt-pdf.com


PC3SF11YVZAF Schematic ( PDF Datasheet ) - Sharp

Teilenummer PC3SF11YVZAF
Beschreibung Phototriac Coupler
Hersteller Sharp
Logo Sharp Logo 




Gesamt 15 Seiten
PC3SF11YVZAF Datasheet, Funktion
PC3SF11YVZ
Series
Zero cross type is also available.
(PC3SF21YVZ Series)
PC3SF11YVZ Series
VDRM : 600V, Reinforced insulation type
Non-zero cross type
DIP 6pin
Phototriac Coupler for triggering
Description
PC3SF11YVZ Series reinforced insulation type
Phototriac Coupler include an infrared emitting diode
(IRED) optically coupled to an output Phototriac.
These devices feature full wave control and are
ideal isolated drivers for medium to high current Triacs.
DIP package provides 5.0kV isolation from input to
output with superior commutative noise immunity.
Features
1. High repetitive peak off-state voltage (VDRM : 600V)
2. Non-zero crossing functionality
3. IFT ranks available (see Model Line-up section in this
datasheet)
4. 6 pin DIP package
5. Reinforced insulation type (MIN. 0.4mm internal
separation)
6. Superior noise immunity (dV/dt : MIN. 1 000V/µs)
7. Lead-free components are also available (see Model
Line-up section in this datasheet)
8. Double transfer mold construction (Ideal for Flow
Soldering)
9. High isolation voltage between input and output
(Viso(rms) : 5.0kV)
Agency approvals/Compliance
1. Recognized by UL1577 (Double protection isolation),
file No. E64380 (as model No. 3SF11)
2. Approved by CSA, file No. CA95323 (as model No.
3SF11)
3. Approved by BSI : BS-EN60065, file No. 6690/BS-
EN60950, file No. 7421, (as model No. 3SF11)
4. Approved by SEMKO, EN60065/EN60950, file No.
0033029 (as model No. 3SF11)
5. Approved by DEMKO, EN60065/EN60950, file No.
310107 (as model No. 3SF11)
6. Approved by FIMKO, EN60065/EN60950, file No.
15795 (as model No. 3SF11)
7. Approved by VDE ()(DIN EN 60747-5-2), file No.
40008189 (as model No. 3SF11)
8. Package resin : UL flammability grade (94V-0)
() DIN EN60747-5-2 : successor standard of DIN VDE0884
Up to Date code "RD" (December 2003), approval of DIN
VDE0884.
From Date code "S1" (January 2004), approval of DIN
EN60747-5-2.
Applications
1. Triggering for Triacs used to switch on and off
devices which require AC Loads.
For example heaters, fans, motors, solenoids, and
valves.
2. Triggering for Triacs used for implementing phase
control in applications such as lighting control and
temperature control (HVAC).
3. AC line control in power supply applications.
Notice The content of data sheet is subject to change without prior notice.
In the absence of confirmation by device specification sheets, SHARP takes no responsibility for any defects that may occur in equipment using any SHARP
devices shown in catalogs, data books, etc. Contact SHARP in order to obtain the latest device specification sheets before using any SHARP device.
Sheet No.: D2-A08001EN
1 Date Mar. 31. 2004
© SHARP Corporation






PC3SF11YVZAF Datasheet, Funktion
PC3SF11YVZ Series
Fig.1 Forward Current vs. Ambient
Temperature
70
60
50
40
30
20
10
0
30
0 50
Ambient temperature Ta (˚C)
100
Fig.2 RMS ON-state Current vs.
Ambient Temperature
175
150
125
100
75
50
25
0
30
0 50
Ambient temperature Ta (˚C)
100
Fig.3 Forward Current vs. Forward Voltage
100
Ta=75˚C
50
50˚C
25˚C
10
5
0˚C
25˚C
1
0.9 1 1.1 1.2 1.3 1.4 1.5
Forward voltage VF (V)
Fig.4 Minimum Trigger Current vs.
Ambient Temperature
10
9
VD=6V
RL=100
8
7
6
5
4
3
2
1
0
40 20
0
20 40 60 80 100
Ambient temperature Ta (˚C)
Fig.5 Relative Repetitive Peak OFF-state
Voltage vs. Ambient Temperature
1.3
1.2
1.1
1
0.9
0.8
0.7
40
20 0 20 40 60 80
Ambient temperature Ta (˚C)
100
Fig.6 ON-state Voltage vs.
Ambient Temperature
2.4
IT=100mA
2.2
2
1.8
1.6
1.4
1.2
1
40 20 0 20 40 60 80 100 120
Ambient temperature Ta (˚C)
Sheet No.: D2-A08001EN
6

6 Page









PC3SF11YVZAF pdf, datenblatt
PC3SF11YVZ Series
Package specification
Sleeve package
1. Through-Hole or SMT Gullwing
Package materials
Sleeve : HIPS (with anti-static material)
Stopper : Styrene-Elastomer
Package method
MAX. 50pcs of products shall be packaged in a sleeve.
Both ends shall be closed by tabbed and tabless stoppers.
The product shall be arranged in the sleeve with its anode mark on the tabless stopper side.
MAX. 20 sleeves in one case.
Sleeve outline dimensions
12.0
520±2
6.7
2. Wide Through-Hole or Wide SMT Gullwing
Package materials
Sleeve : HIPS (with anti-static material)
Stopper : Styrene-Elastomer
Package method
MAX. 50pcs of products shall be packaged in a sleeve.
Both ends shall be closed by tabbed and tabless stoppers.
The product shall be arranged in the sleeve with its anode mark on the tabless stopper side.
MAX. 20 sleeves in one case.
Sleeve outline dimensions
15.0
(Unit : mm)
520±2
6.35
12
(Unit : mm)
Sheet No.: D2-A08001EN

12 Page





SeitenGesamt 15 Seiten
PDF Download[ PC3SF11YVZAF Schematic.PDF ]

Link teilen




Besondere Datenblatt

TeilenummerBeschreibungHersteller
PC3SF11YVZAPhototriac CouplerSharp
Sharp
PC3SF11YVZAFPhototriac CouplerSharp
Sharp

TeilenummerBeschreibungHersteller
CD40175BC

Hex D-Type Flip-Flop / Quad D-Type Flip-Flop.

Fairchild Semiconductor
Fairchild Semiconductor
KTD1146

EPITAXIAL PLANAR NPN TRANSISTOR.

KEC
KEC


www.Datenblatt-PDF.com       |      2020       |      Kontakt     |      Suche