|
|
PDF P270HVN01.0 Data sheet ( Hoja de datos )
| Número de pieza | P270HVN01.0 | |
| Descripción | Color TFT-LCD | |
| Fabricantes | AUO | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de P270HVN01.0 (archivo pdf) en la parte inferior de esta página. Total 30 Páginas | ||
|
No Preview Available !
Product Specification
AU OPTRONICS CORPORATION
P270HVN01.0
() Preliminary Specification
(V) Final Specification
Module
Model Name
27.0” Color TFT-LCD
P270HVN01.0
Customer
Date
Approved by
Note: This Specification is subject to
change without notice.
Approved by
Date
Howard Lee
2013/5/20
Prepared by
Date
Rafael
2013/5/24
Desktop Display Business Group /
AU Optronics Corporation
-1-
Data Modul AG - www.data-modul.com
1 page  
Product Specification
AU OPTRONICS CORPORATION
P270HVN01.0
1 Handling Precautions
1) Since front polarizer is easily damaged, pay attention not to scratch it.
2) Be sure to turn off power supply when inserting or disconnecting from input connector.
3) Wipe off water drop immediately. Long contact with water may cause discoloration or spots.
4) When the panel surface is soiled, wipe it with absorbent cotton or other soft cloth.
5) Since the panel is made of glass, it may break or crack if dropped or bumped on hard surface.
6) Since CMOS LSI is used in this module, take care of static electricity and insure human earth when handling.
7) Do not open or modify the Module Assembly.
8) Do not press the reflector sheet at the back of the module to any directions.
9) In case a TFT-LCD Module has to be put back into the packing container slot after once it was taken out from the
container, do not press the center of the LED lightbar edge. Otherwise the TFT-LCD Module may be damaged.
10) Insert or pull out the interface connector, be sure not to rotate nor tilt it of the TFT-LCD Module.
11) Do not twist nor bend the TFT -LCD Module even momentary. It should be taken into consideration that no
bending/twisting forces are applied to the TFT-LCD Module from outside. Otherwise the TFT-LCD Module may
be damaged.
12) Please avoid touching COF position while you are doing mechanical design.
13) When storing modules as spares for a long time, the following precaution is necessary:
℃ ℃Store them in a dark place. Do not expose the module to sunlight or fluorescent light. Keep the temperature
between 5 and 35 at normal humidity.
-5-
Data Modul AG - www.data-modul.com
5 Page 
Product Specification
AU OPTRONICS CORPORATION
P270HVN01.0
The output signals of photo detector are measured when the input signals are changed from “Black” to
“White” (rising time, TR), and from “White” to “Black” (falling time, TF), respectively. The response time is
interval between the 10% and 90% of optical response. (Black & White color definition: Please refer section
3.4.3)
% TF
TR
Optical
re sp on se
100
90
10
0
White
Black B lack
W hite
1 Frame
1 Frame
11
Data Modul AG - www.data-modul.com
--
11 Page | ||
| Páginas | Total 30 Páginas | |
| PDF Descargar | [ Datasheet P270HVN01.0.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| P270HVN01.0 | Color TFT-LCD | AUO |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |