Datenblatt-pdf.com


CDX-565MXRF Schematic ( PDF Datasheet ) - Sony

Teilenummer CDX-565MXRF
Beschreibung COMPACT DISC CHANGER SYSTEM SERVICE MANUAL
Hersteller Sony
Logo Sony Logo 




Gesamt 30 Seiten
CDX-565MXRF Datasheet, Funktion
http://www.xiaoyu163.com
QQ 3763151C5D0X-8596254M98X2R9F9
SERVICE MANUAL
US Model
Ver 1.1 2002.06
Canadian Model
E Model
Model Name Using Similar Mechanism
CD Drive Mechanism Type
Optical Pick-up Name
CDX-757MX
MG-251B-137
KSS-720A
SPECIFICATIONS
TEL
13942296513 QQCD changer (CDX-565MXRF)
System
Compact disc digital audio
system
Laser Diode Properties
Material
GaAlAs
Wavelength
Emission Duration
Laser output power
780 nm
Continuous
Less than 44.6 µW*
* This output is the value measured at a distance of
200 mm from the objective lens surface on the
Optical Pick-up Block.
Transmitting frequency
Input/output terminals
Current drain
Operating temperature
Dimensions
Mass
88.3 MHz/88.5 MHz/
88.7 MHz/88.9 MHz/
89.1 MHz/89.3 MHz/
89.5 MHz/89.7 MHz/
89.9 MHz/(switchable)
Wired remote control (8 pin)
RF signal (FM) output
Power input (3 pin)
900 mA (at playback)
900 mA (at disc loading/
ejecting)
–10°C to +55°C (14°F to 131°F)
Approx. 262 × 90 × 185 mm (10
3/ 8 × 3 5/ 8 × 7 3/ 8 in.)
(w/h/d)
Approx. 2.1 kg (4 lb. 10 oz.)
376315150 892498299Wired remote (RM-X83RF)
/Wireless remote (RM-X84RF)
Dimensions
Mass
Battery
Wired remote:
Approx. 127.5 × 41.5 × 24 mm
(5 1/ 8 × 1 11/ 16 × 31/ 32 in.)
(w/h/d)
Wireless remote:
Approx. 52 × 8.5 × 90 mm
(2 1/ 16 × 3/ 8 × 3 9/ 16 in.)
(w/h/d)
Wired remote:
Approx. 280 g (10 oz.)
Wireless remote:
Approx. 30 g (1 oz.)
Wireless remote:
Lithium battery (CR2025)
Supplied accessories
Disc magazine (1)
Parts for installation and
connections (1 set)
Design and specifications are subject to change
without notice.
Relay box
Input/output
Dimensions
Mass
Antenna input terminal
Antenna output cord
CD Changer input cord
40 × 40 × 27 mm
(1 5/ 8 × 1 5/ 8 × 1 1/ 8 in.)
(w/h/d)
140 g (5 oz.)
www x aoy u163 com. i9-873-927-02 Sony Corporation
COMPACT DISC CHANGER SYSTEM
.
2002F0500-1
e Vehicle Company
C 2002.06
Published by Sony Engineering Corporation
http://www.xiaoyu163.com






CDX-565MXRF Datasheet, Funktion
CDX-565MXRF
http://www.xiaoyu163.com
SECTION 1
This section is extracted from
Location and function of controls
QQ 376315150 892498299Wiredremote(RM-X83RF)
GENERAL
Nomenclature
Wireless remote (RM-X84RF)
instruction manual.
qg
Télécommande à fil (RM-X83RF)
Télécommande sans fil (RM-X84RF)
3
1
6 7 89
qh
qj
qk
DSPL
SCRL
ALBM
LIST
DISC +
ENTER
ALBM
w;
wa
0 qa qs qd qf
4
ql
5
REP DISC
SHUF
OFF
10TRACK
D-BASS
ws
wd
23
4
5
wf
1 AMS (Automatic Music Sensor)/ENTER
dial
2 Infrared receptor for the wireless
remote
3 LIST button
4 u (play/pause) button
If pressed during CD playback, the CD will pause.
If pressed again, CD playback will continue.
5 OFF button
6 DISC/ALBM (disc number/album number)
indication
7 TRACK (track number) indication
8 MIN (minute) indication
9 SEC (second) indication
0 MP3 file indication
Available only when a disc with MP3 files is
selected.
qa ID3 tag indication
Available only when an MP3 file is played.
qs D-BASS indication
qd REP (repeat play) indication
qf SHUF (shuffle play) indication
qg –/+ buttons
qh DSPL/SCRL (indication change/name
scroll) button
qj ALBM –/+ (album select) buttons
Skips to the next/previous album. Note that if the
last album is playing and the ALBM + button is
pressed, playback loops back to the first album. Or
if the first album is playing, and the ALBM –
button is pressed, playback loops to the last album.
Available only when an MP3 file is played.
qk AMS/MANU (Automatic Music Sensor/
manual search) buttons
ql REP (repeat play) button
w; ENTER button
wa DISC +/– buttons
ws SHUF (shuffle play) button
wd D-BASS button
wf 10 TRACK +/– buttons
By pressing the 10 TRACK + or – buttons, the unit
skips forwards or backwards 10 tracks (either
within the current album, or into the next/
previous album (still counting 10 tracks),
depending on the number of tracks in the current
album). Note that if any of last 10 tracks of the disc
is playing and the 10 TRACK + button is pressed,
playback loops back to the beginning of the disc
and continues counting to make a 10-track skip. Or
if any of first 10 tracks of the disc is playing, and
the 10 TRACK – button is pressed, playback loops
back to the end of the disc and continues counting
to make a 10-track skip.
TEL
(Wired remote)
DSPL
SCRL
ALBM
LIST
DISC +
ENTER
ALBM
REP DISC
SHUF
(Wireless remote)
AMS function
Keep rotating the AMS/ENTER dial until a desired track is
selected.
Next track: Rotate the AMS/ENTER dial towards > .
Previous track: Rotate the AMS/ENTER dial towards ..
While the first/last track on the disc is playing, if the AMS/
ENTER dial is rotated, playback skips to the last/first track of
the disc.
Using on the wireless remote
Press AMS/MANU m ./> M to skip/select a track.
Manual search function (Only for the wireless
remote)
Keep pressing AMS/MANU m ./> M until a
desired point of the track is selected.
The elapsed playing time of the track will be shown in the
display window during manual search.
“ ” or “ ” indicates that the disc has reached
the beginning/end of the track. It is not possible to reverse/
fast-forward at this point.
Disc select function
1 Press (LIST).
The disc name during playback will flash.
13942296513DSPL LIST ENTER
“MP3 DISC” will be displayed if a disc with an MP3 file is
selected.
2 Rotate the AMS/ENTER dial to select a desired disc.
SCRL 3 Press the AMS/ENTER dial to start playback.
ALBM
DISC +
ALBM
Notes
The following indications may be displayed in the following cases.
REP DISC
SHUF
• “NO DISC”: No disc is inserted in the CD changer.
• “NO NAME”: No disc name is available.
(Wired remote)
(Wireless remote)
• “NOT READ”: The disc information cannot be read.
Using on the wireless remote
1 Press (LIST).
2 Press / to select a desired disc.
3 Press (ENTER) to start.
Also, you can press / to select a disc.
The next/previous disc will be selected by each press.
Notes
• The display window will be back to normal without an
operation for 5 seconds during the disc select function.
• The disc select function is unavailable during “Changing the
transmitting frequency” or “Changing the output level”
procedure.
Tip
Press (LIST) to cancel the disc select function before step 3.
1 Molette AMS (détecteur automatique de
musique)/ENTER
2 Récepteur de télécommande sans fil IR
3 Touche LIST
4 Touche u (lecture/pause)
Si vous appuyez sur cette touche en cours de
lecture CD, le CD passe en mode de pause. Si vous
appuyez de nouveau sur cette touche, la lecture
CD reprend.
5 Touche OFF
6 Indicateur DISC/ALBM (numéro de
disque ou d’album)
7 Indicateur TRACK (numéro de plage)
8 Indication MIN (minute)
9 Indication SEC (seconde)
0 Indicateur de fichier MP3
Disponible uniquement lorsqu’un disque
comportant des fichiers MP3 est sélectionné.
qa Indicateur d’étiquette ID3
Disponible uniquement lors de la lecture d’un
fichier MP3.
qs Indication D-BASS
qd Indication REP (répétition de la lecture)
qf Indication SHUF (lecture aléatoire)
qg Touches –/+
qh Touche DSPL/SCRL (changement
d’indicateur/défilement du nom)
qj Touches ALBM –/+ (sélection d’album)
Permettent de passer à l’album précédent ou
suivant. Notez que si le dernier album est en cours
de lecture et que la touche ALBM + est enfoncée, la
lecture revient au premier album. De même, si le
premier album est en cours de lecture et que la
touche ALBM – est enfoncée, la lecture revient au
dernier album.
Disponibles uniquement lors de la lecture d’un
fichier MP3.
qk Touches AMS/MANU (détecteur
automatique de musique/recherche
manuelle)
ql Touche REP (lecture répétée)
w; Touche ENTER
wa Touches DISC +/–
ws Touche SHUF (lecture aléatoire)
wd Touche D-BASS
wf Touches 10 TRACK +/–
Lorsque vous appuyez sur la touche 10 TRACK +
ou –, l’appareil saute dix plages vers l’avant ou
vers l’arrière (soit dans l’album en cours, soit dans
l’album suivant ou précédent, dix plages à la fois,
selon le nombre de plages de l’album en cours).
Notez que si l’une des dix dernières plages du
disque est en cours de lecture et que la touche 10
TRACK + est enfoncée, la lecture revient au début
du disque et continue à sauter des plages jusqu’à
un total de dix plages. Notez que si l’une des dix
premières plages du disque est en cours de lecture
et que la touche 10 TRACK – est enfoncée, la
lecture passe à la fin du disque et continue à sauter
des plages jusqu’à un total de dix plages.
(Télécommande à fil)
DSPL
SCRL
ALBM
LIST
DISC +
ENTER
ALBM
REP DISC
SHUF
(Télécommande sans fil)
Fonction AMS
Tournez la molette AMS/ENTER jusqu’à ce que vous ayez
sélectionné la plage souhaitée.
Plage suivante : Tournez la molette AMS/ENTER vers > .
Plage précédente : Tournez la molette AMS/ENTER vers ..
Pendant que la première ou la dernière plage du disque est en
cours de lecture, si vous tournez la molette AMS/ENTER, la
lecture passe à la première ou à la dernière plage du disque.
Utilisation de la télécommande sans fil
Appuyez sur AMS/MANU m ./> M pour sauter ou
sélectionner une plage.
Fonction de recherche manuelle (Télécommande
sans fil uniquement)
Maintenez enfoncée AMS/MANU m ./> M jusqu’à
ce que vous ayez sélectionné le point souhaité de la plage.
Le temps de lecture écoulé de la plage est indiqué dans la
fenêtre d’affichage en cours de recherche manuelle.
“ ” ou “ ” indique que le disque a atteint le
début ou la fin de la plage. À ce point, il n’est pas possible de
reculer ou d’avancer rapidement.
Fonction de sélection de disque
QQ
1 Appuyez sur (LIST).
Le nom du disque clignote en cours de lecture.
376315150 892498299DSPL
SCRL
LIST
ENTER
“MP3 DISC” s’affiche si un disque contenant un fichier
MP3 est sélectionné.
2 Faites tourner la molette AMS/ENTER pour
sélectionner le disque souhaité.
ALBM
DISC +
ALBM
3 Appuyez sur la molette AMS/ENTER pour lancer la
lecture.
(Télécommande à fil)
REP DISC
SHUF
(Télécommande sans fil)
Remarques
Les indications ci-dessous peuvent s’afficher dans les cas suivants.
• “NO DISC” : Aucun disque n’a été inséré dans le changeur CD.
• “NO NAME” : Aucun nom de disque n’est disponible.
• “NOT READ” : Impossible de lire les informations du disque.
Utilisation de la télécommande sans fil
1 Appuyez sur (LIST).
2 Appuyez sur / pour sélectionner le disque
souhaité.
3 Appuyez sur (ENTER) pour commencer.
Vous pouvez également appuyer sur
/
pour sélectionner un disque.
Chaque pression permet de sélectionner le disque suivant
ou précédent.
Remarques
• Pendant que la fonction de sélection de disque est activée, la
fenêtre d’affichage revient à l’affichage normal si aucune
opération n’est effectuée pendant cinq secondes.
• La fonction de sélection de disque n’est pas disponible pendant
les procédures de changement de fréquence de transmission ou
de changement de niveau de sortie.
Conseil
Pour désactiver la fonction de sélection de disque avant l’étape 3,
appuyez sur (LIST).
Installing the battery
Replace the battery with a new CR2025 lithium battery. Use of any another battery may present a risk of fire or
explosion.
Installation de la pile
Remplacez la pile par une nouvelle pile au lithium CR2025. L’utilisation de tout autre type de pile peut poser un
risque d’incendie ou d’explosion.
c
+ side up
Côté + vers le haut
Lithium battery life
When the battery becomes weak, you will not be able to operate the unit with the wireless remote.
Battery life is approx. six months depending on the conditions of use.
WARNING
Battery may explode if mistreated.
Do not recharge, disassemble or dispose of in fire.
Notes on the lithium battery
• Keep the lithium battery out of the reach of children.
Should the battery be swallowed, immediately consult a doctor.
• Wipe the battery with a dry cloth to assure a good contact.
• Be sure to observe the correct polarity when installing the battery.
• Do not hold the battery with metallic tweezers, otherwise a short-circuit may occur.
Autonomie de la pile au lithium
Lorsque les piles s’épuisent, il ne vous sera plus possible de commander l’appareil à l’aide de la télécommande
sans fil.
L’autonomie de la pile est d’environ six mois suivant les conditions d’utilisation.
ATTENTION
Utilisée de façon incorrecte, la pile peut exploser.
Ne pas la recharger, la démonter ni la jeter au feu.
Remarques sur la pile au lithium
• Gardez les piles au lithium hors de la portée des enfants.
En cas d’ingestion, consultez immédiatement un médecin.
• Essuyez la pile à l’aide d’un chiffon sec de façon à assurer un bon contact.
• Respectez la polarité de la pile lorsque vous l’installez.
• Ne saisissez pas la pile à l’aide d’une pince métallique, sinon vous risquez de provoquer un court-circuit.
www. xiaoyu163. com
6
http://www.xiaoyu163.com

6 Page









CDX-565MXRF pdf, datenblatt
CDX-565MXRF
http://www.xiaoyu163.com
QQ 376315150Note: Follow the disassembly procedure in the numerical order given.
2-2. CASE (UPPER. T), FRONT PANEL ASSY
892498299
3 screw
(PTT2.6 × 6)
3 screw (PTT2.6 × 6)
4 lever (FLT. 838)
5 case (upper. T)
1 screw
(PTT2.6 × 6)
3 screw (PTT2.6 × 6)
4 lever (FLT. 838)
TEL 13942296513
2 front panel assy
QQ 376315150 892498299
1 screw (PTT2.6 × 6)
2-3. MECHANISM DECK (MG-251B-137)
2 tension coil spring (FL)
1 two dampers (T)
4 mechanism deck
(MG-251B-137)
2 tension coil spring (FL)
filament tape
www. xiaoyu163. com
3 FM flexible board
(CN701)
1 two dampers (T)
12
http://www.xiaoyu163.com

12 Page





SeitenGesamt 30 Seiten
PDF Download[ CDX-565MXRF Schematic.PDF ]

Link teilen




Besondere Datenblatt

TeilenummerBeschreibungHersteller
CDX-565MXRFCOMPACT DISC CHANGER SYSTEM SERVICE MANUALSony
Sony

TeilenummerBeschreibungHersteller
CD40175BC

Hex D-Type Flip-Flop / Quad D-Type Flip-Flop.

Fairchild Semiconductor
Fairchild Semiconductor
KTD1146

EPITAXIAL PLANAR NPN TRANSISTOR.

KEC
KEC


www.Datenblatt-PDF.com       |      2020       |      Kontakt     |      Suche