|
|
PDF ADNS-6010 Data sheet ( Hoja de datos )
| Número de pieza | ADNS-6010 | |
| Descripción | Laser Mouse Sensor | |
| Fabricantes | AVAGO | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de ADNS-6010 (archivo pdf) en la parte inferior de esta página. Total 30 Páginas | ||
|
No Preview Available !
ADNS-6010
Laser Mouse Sensor
Data Sheet
Description
The Avago Technologies ADNS-6010 sensor along with
the ADNS-6120 or ADNS-6130-001 lens, ADNS-6230-
001 clip and ADNV-6340 laser diode form a complete
and compact laser mouse tracking system. It is the
world’s first laser-illuminated systems enabled for high
performance navigation. Driven by Avago Technologies
LaserStream, it can operate on many surface that prove
difficult or traditional LED-based optical navigation. It’s
high-performance architecture is capable of sensing
high-speed mouse motion -with resolution up to 2000
counts per inch, velocities up to 45 inches per second
(ips) and accelerations up to 20g. This sensor is powered
for the extremely high sensitive user
There are no moving parts, in the complete assembly for
ADNS-6010 laser mouse system, thus it is high reliability
and less maintenance for the end user. In addition, preci-
sion optical alignment is not required, facilitating high
volume assembly.
Theory of Operation
The ADNS-6010 is based on LaserStream Technology,
which measures changes in position by optically acquir-
ing sequential images (frames) and mathematically de-
termining the direction and magnitude of movement.
ADNS-6010 contains an Image Acquisition System (IAS),
a Digital Signal Processor (DSP), and a four wire serial
port. The IAS acquires microscopic surface images via
the lens and illumination system. These images are
processed by the DSP to determine the direction and
distance of motion. The DSP calculates the 'x and 'y
relative displacement values. An external microcontroller
reads the 'x and 'y information from the sensor serial
port. The microcontroller then translates the data into
PS2 or USB signals before sending them to the host PC
or game console.
Features
x High speed motion detection – up to 45 ips and 20g
x New LaserStream architecture for greatly improved
optical navigation technology
x Programmable frame rate over 7080 frames per
second
x SmartSpeed self-adjusting frame rate for optimum
performance
x Serial port burst mode for fast data transfer
x 400, 800, 1600 or 2000 cpi selectable resolution
x Single 3.3 volt power supply
x Four-wire serial port along with Power Down, and
Reset pins
x Laser fault detect circuitry on-chip for Eye Safety
Compliance
Applications
x Mice for game consoles and computer games
x Mice for desktop PC’s, Workstations, and portable
PC’s
x Laser Trackballs
x Integrated input devices
1 page  
2D Assembly Drawing of ADNS-6010, PCBs and Base Plate
ADNS-6010 (sensor)
Customer Supplied PCB
ADNS-6120 (lens)*
Customer Supplied VCSEL PCB
ADNV-6340 (VCSEL)
ADNS-6230-001 (clip)
Customer Supplied Base Plate
With Recommended Features
Per IGES Drawing
*or ADNS-6130-001 for trim lens
Figure 4. Exploded view drawing
Shown with ADNS-6120 or ADNS-6130-001 Laser Mouse
Lens, ADNS-6230-001 VCSEL Assembly Clip and ADNV-
6340 VCSEL. The components interlock as they are
mounted onto defined features on the base plate.
The ADNS-6010 laser mouse sensor is designed for
mounting on a through hole PCB, looking down. There
is an aperture stop and features on the package that
align to the lens.
The ADNV-6340 VCSEL provides a laser diode with a
single longitudinal and a single transverse mode. It is
particularly suited as lower power consumption and
highly coherent replacement of LEDs. It also provides
wider operation range while still remaining within single-
mode, reliable operating conditions.
The ADNS-6120 or ADNS-6130-001 Laser Mouse Lens is
designed for use with ADNS-6010 sensor and the illumi-
nation subsystem provided by the VCSEL assembly clip
and the VCSEL. Together with the VCSEL, the ADNS-6120
or ADNS-6130-001 lens provides the directed illumina-
tion and optical imaging necessary for proper operation
of the Laser Mouse Sensor. ADNS-6120 or ADNS-6130-
001 is a precision molded optical component and should
be handled with care to avoid scratching of the optical
surfaces. ADNS-6120 has a large round flange to provide
a long creepage path for any ESD events that occur at the
opening of the base plate.
The ADNS-6230-001 VCSEL Assembly Clip is designed to
provide mechanical coupling of the ADNV-6340 VCSEL
to the ADNS-6120 or ADNS-6130-001 lens. This coupling
is essential to achieve the proper illumination alignment
required for the sensor to operate on a wide variety of
surfaces.
Avago Technologies provides an IGES file drawing de-
scribing the base plate molding features for lens and
PCB alignment.
5
5 Page 
Absolute Maximum Ratings
Parameter
Storage Temperature
Operating Temperature
Lead Solder Temp
Symbol
TS
TA
Supply Voltage
ESD
VDD3
Input Voltage
VIN
Output current
Input Current
IOUT
IIN
Minimum
-40
-15
-0.5
-0.5
Maximum
85
55
260
3.7
2
VDD3+0.5
7
15
Units
qC
qC
qC
V
kV
V
mA
mA
Notes
For 10 seconds, 1.6mm below seating
plane.
All pins, human body model MIL 883
Method 3015
NPD, NCS, MOSI, SCLK, RESET, OSC_IN,
OSC_OUT, REFC, RBIN
MISO, LASER_NEN
XY_LASER current with RBIN 12.7KΩ
LP-CFG0 = 0x00; LP_CFG1 = 0xFF
Recommended Operating Conditions
Parameter
Operating Temperature
Power supply voltage
Power supply rise time
Supply noise(Sinusoidal)
Symbol
TA
VDD3
VRT
VNB
Minimum
0
3.10
1
Oscillator Frequency
fCLK
Serial Port Clock Frequency fSCLK
23
Typical
3.30
Maximum
40
3.60
30
80
24 25
2
500
Resonator Impedance
Distance from lens refer-
ence plane to surface
Speed
Acceleration
Frame Rate
XRES
Z
S
A
FR
2.18
2000
55
2.40 2.62
45
20
7080
Resistor value for LASER
Drive Current set
Voltage at XY_LASER
Rbin See Laser Bin Table
Vxy_laser 0.7
VDD3
Units Notes
qC
Volts
us 0 to 3.0V
mV 10kHz- 300KHZ
p-p 300KHz-50MHz
MHz Set by ceramic resonator
MHz Active drive, 50% duty cycle
kHz Open drain drive with pull-ups
on, 50 pF load
:
mm Results in +/- 0.2 mm mini-
mum DOF, see Figure 10
in/sec
g
Frames/s See Frame_Period register
section
kOhms ADNV-6340 VCSEL
V
11
11 Page | ||
| Páginas | Total 30 Páginas | |
| PDF Descargar | [ Datasheet ADNS-6010.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| ADNS-6010 | Laser Mouse Sensor | AVAGO |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |