Datenblatt-pdf.com


E3ZM-V Schematic ( PDF Datasheet ) - Omron Electronics

Teilenummer E3ZM-V
Beschreibung Print mark detection photoelectric sensor
Hersteller Omron Electronics
Logo Omron Electronics Logo 




Gesamt 12 Seiten
E3ZM-V Datasheet, Funktion
Print mark detection photoelectric sensor in compact stainless steel housing
E3ZM-V
The detergent resistant photoelectric sensor
in a robust stainless steel housing provides
reliable detection of all common print marks
in packaging applications.
• White LED for stable detection of differently colored
print marks
• SUS 316L stainless steel housing
• Easy-to-use teach-in button or remote dynamic teach
• Fast response time of 50 µs
Features
Reliable print mark detection within OMRON’s most popular E3Z sensor family
The E3ZM-V provides reliable print mark detection in the compact sized E3Z housing. For packaging machine makers the E3Z
family offers a complete sensor platform with one mounting concept simplifying installation and machine design.
• Space-saving design with an
SUS316L housing
The compact design reduces volume by 90% compared
to conventional mark sensors.
E3ZM
Standard Size
• Coaxial optical system
The coaxial optical system ensures stable detection of print
marks on uneven surfaces.
Straight Sensing Object
RGB
light-receiving
element
Half mirror
Conventional mark
sensor size
Only 10%
the volume!
E3ZM-V
White LED
Lens
Sensing object
(with regular reflection)
Inclined Sensing Object
RGB
light-receiving
element
Half mirror
White LED
Lens
Sensing object
(with regular reflection)
E3ZM-V
http://www.Datasheet4U.com
1






E3ZM-V Datasheet, Funktion
Excess Gain vs. Distance
E3ZM-V@@
120
100
80
60
40
Angle vs. Incident Characteristics
E3ZM-V@@
Teaching ON for white and OFF for black at 12 mm
100
E3ZM-V@@
Teaching ON for white and OFF for black at 12 mm
100
80 80
60 60
40 40
20
0
10
11
20 20
0 12 mm
12 13 14 20 15 10 5 0 5 10 15 20
Distance (mm)
Angle (°)
0 12 mm
20 15 10 5 0
5
10 15 20
Angle (°)
I/O Circuit Diagrams
NPN Output
Model
E3ZM-V61
E3ZM-V66
Timing charts
Sensing object
Operation
indicator
(yellow)
Output
transistor
ON
OFF
ON
OFF
Load
Operate
(e.g., relay) Reset
Color taught Color taught Color taught Color taught
1st 2nd 1st 2nd
Output circut
Operation
indicator
(yellow)
Teaching
indicator
(red)
Stability
indicator
(green)
Photo-
electric
Sensor
Main
Circuit
Between brown (1)
and black (4) leads
Brown
1
Load
Pink
2
Remote control input
Black
4
Control output
Blue
3
M8 Connector
Pin Arrangement
24
13
10 to
30 VDC
PNP Output
Model
E3ZM-V81
E3ZM-V86
Timing charts
Sensing object
Operation
indicator
(yellow)
Output
transistor
ON
OFF
ON
OFF
Load
Operate
(e.g., relay) Reset
Color taught Color taught Color taught Color taught
1st 2nd 1st 2nd
Output circut
Operation
indicator
(yellow)
Teaching
indicator
(red)
Stability
indicator
(green)
Photo-
electric
Sensor
Main
Circuit
Between blue (3)
and black (4) leads
Brown
1
Control
Black output
4
Remote
Pink control input
2
Blue
3
Load
10 to
30 VDC
M8 Connector
Pin Arrangement
24
13
Plugs (Sensor I/O Connectors)
M8 4-pin Connectors
42
31
1
2
3
4
Wire color
Brown
White
Blue
Black
XS3F-E421-402-A
XS3F-E421-405-A
XS3F-E422-402-A
XS3F-E422-405-A
Classification Wire color Connector Application
pin No.
DC
Brown
1
Power supply (+v)
White
2
Remote control input
Blue
3
Power supply (0 V)
Black
4
Output
Note: The above M8 Connectors made by OMRON are IP67.
Do not use them in an enviornment where IP69K is required.
6 Photoelectric Sensor

6 Page









E3ZM-V pdf, datenblatt
READ AND UNDERSTAND THIS DOCUMENT
Please read and understand this document before using the products.
Please consult your OMRON representative if you have any ques-
tions or comments.
WARRANTY
OMRON’s exclusive warranty is that the prod ucts are fre e from de-
fects in materials and workmanship for a period of one year (or other
period if specified) from date of sale by OMRON.
OMRON MAKES NO WARR ANTY OR R EPRESENTATION, EX-
PRESS OR IMPLIED, REGARD ING NON-INFRINGEMENT, MER-
CHANTABILITY, O R FITNESS FOR PARTIC ULAR PURPOSE OF
THE PRODUCTS. ANY BUYEROR USER ACKNOWLEDGES THAT
THE BUYER OR USER ALONE HAS DETERMINED THAT THE
PRODUCTS WILL SU ITABLY MEET TH E REQUIREMENTS OF
THEIR INTENDED U SE. OMRON DISCLAIMS ALL OTHER WAR-
RANTIES, EXPRESS OR IMPLIED.
LIMITATIONS OF LIABILITY
OMRON SHALL NOT B E RESPO NSIBLE FOR SPE CIAL, INDI-
RECT, OR CONSEQUENTIAL DAMAGES, LOSS OF PROFITS OR
COMMERCIAL LOSS IN ANY WAY C ONNECTED WITH THE
PRODUCTS, WHETHER SUCH CLAIM IS BASED ON CONTRACT,
WARRANTY, NEGLIGENCE, OR STRICT LIABILITY.
In no event shall responsibility of OMRON for any act exceed the in-
dividual price of the product on which liability is asserted.
IN NO EVENT SHALL OMRON BE RESPONSIBLE FOR WARRAN-
TY, REPAIR, OR OTH ER CLAIMS REGARDING TH E PRODUCTS
UNLESS OMRON’S ANALYSIS C ONFIRMS THAT THE PROD-
UCTS WERE PROPERLY HANDLED, STORED, INSTALLED, AND
MAINTAINED AND NOT SUBJECT TO CONTAMINATION, ABUSE,
MISUSE, OR INAPPROPRIATE MODIFICATION OR REPAIR.
SUITABILITY FOR USE
THE P RODUCTS CONTAINED IN THIS DOCUMENT A RE NOT
SAFETY RATED. THEY ARE NOT DESIGNED OR RATED FOR EN-
SURING SAFETY OF PERSONS, AND SH OULD NOT BE RELIED
UPON AS A SA FETY COMPONENT OR PR OTECTIVE DEVICE
FOR SUCH PURPOSES. Please refer to separate catalogs for OM-
RON's safety rated products.
OMRON shall not be responsib le for conformity with any standard s,
codes, or regulations that apply to the combination of products in the
customer’s application or use of the product.
At the customer’s request, OMRON will provide applicable third party
certification documents identifying ratings and limitations of use that
apply to the product s. This information by itself is not sufficient for a
complete determination of the suitability of the products in combina-
tion with the end product, machine, system, or other application or
use.
The following are some examples of applications for which particular
attention must be given. This is not intended to be an exhaustive list
of all possible uses of the products, nor is it intended to imply that the
uses listed may be suitable for the products:
• Outdoor u se, uses in volving po tential chemical contamin ation o r
electrical inte rference, o r conditions or u ses not described in this
document.
• Nuclear energy control systems, combustion systems, railroad sys-
tems, aviation systems, medical equipment, amusement machines,
vehicles, safety equipment, and installations subject to separate in-
dustry or government regulations.
• Systems, machines, and equipment that could present a risk to life
or property.
Please know a nd observe all prohi bitions of use applicable to the
products.
NEVER USE THE PRODUCTS FOR AN APPLICATION INVOLVING
SERIOUS RISK TO LIFE O R PROPERTY WITH OUT E NSURING
THAT THE SYSTEM AS A WHOL E HAS BEE N DESIG NED TO
ADDRESS THE R ISKS, AND T HAT T HE OMRON PRODUCT IS
PROPERLY RATED AN D INST ALLED F OR THE INTENDED USE
WITHIN THE OVERALL EQUIPMENT OR SYSTEM.
PERFORMANCE DATA
Performance data given in this doc ument is provided as a guide for
the user in determining suitability and does not constitute a warranty.
It may represent the result of OMRON’s test conditions, and the users
must correlate it to actual application requirements. Actual perfor-
mance is subject to the OMRON Warranty and Limitations of Liability.
CHANGE IN SPECIFICATIONS
Product specifications and accessories may be changed at any time
based on improvements and other reasons.
It is our practice to change model numbers when published ratings or
features are cha nged, or when si gnificant construction changes are
made. However, some specifications of the product may be changed
without any notice. When in doubt, special model numbers may be as-
signed to fix or establish key spe cifications for y our applicatio n on
your request. Please consult with your OMRON representative at any
time to confirm actual specifications of purchased products.
DIMENSIONS AND WEIGHTS
Dimensions and weights are nominal and are not to be used for man-
ufacturing purposes, even when tolerances are shown.
ERRORS AND OMISSIONS
The information in this document has been carefully checked and is
believed to be accurat e; however, no responsibility is assumed for
clerical, typographical, or proofreading errors, or omissions.
PROGRAMMABLE PRODUCTS
OMRON shall not be responsible for the user’s programming ofa pro-
grammable product, or any consequence thereof.
COPYRIGHT AND COPY PERMISSION
This document shall not be copied for sales or pro motions without
permission.
This document is protected by copyright and is intended solely for use
in conjunction with the product. Please notify us before copying or re-
producing th is document in any manner, for any other purpose. If
copying or transmitting this document to another, ple ase cop y or
transmit it in its entirety.
Cat. No. E389-E2-01-X
In the interest of product improvement, specifications are subject to change without notice.
OMRON EUROPE B.V.
Wegalaan 67-69,
NL-2132 JD, Hoofddorp,
The Netherlands
Phone: +31 23 568 13 00
Fax: +31 23 568 13 88
www.industrial.omron.eu
12 Photoelectric Sensor

12 Page





SeitenGesamt 12 Seiten
PDF Download[ E3ZM-V Schematic.PDF ]

Link teilen




Besondere Datenblatt

TeilenummerBeschreibungHersteller
E3ZM-VPrint mark detection photoelectric sensorOmron Electronics
Omron Electronics

TeilenummerBeschreibungHersteller
CD40175BC

Hex D-Type Flip-Flop / Quad D-Type Flip-Flop.

Fairchild Semiconductor
Fairchild Semiconductor
KTD1146

EPITAXIAL PLANAR NPN TRANSISTOR.

KEC
KEC


www.Datenblatt-PDF.com       |      2020       |      Kontakt     |      Suche