|
|
Número de pieza | AMIS-39100 | |
Descripción | Octal High Side Driver | |
Fabricantes | AMI SEMICONDUCTOR | |
Logotipo | ||
Hay una vista previa y un enlace de descarga de AMIS-39100 (archivo pdf) en la parte inferior de esta página. Total 16 Páginas | ||
No Preview Available ! AMIS-39100: Octal High Side Driver with Protection
Data Sheet
1.0 General Description
The AMIS-39100 is a general purpose IC with eight integrated high side (HS) output drivers. The device is designed to control the
power of virtually any type of load in a 12V automotive environment, such as transistor gates, relays, LEDs etc.
Each of the output drivers of the AMIS-39100 is able to drive up to 275mA continuously when connected to an inductive load of 300mH.
Even higher driver output currents can be obtained as long as the total current of the device is limited. The integrated charge-pump of
the AMIS-39100, which uses only one low cost external capacitor, avoids thermal runaways even if the battery voltage is low. The HS
drivers withstand short to ground (even when AMIS-39100 has lost its ground connection), short to the battery and has over-current
limitation. In case of a potential hazardous situation, the drivers are switched off and the diagnostic state of the HS drivers can be read
out via serial peripheral interface (SPI). In case of a short to ground, the output driver is deactivated after a de-bounce time.
The AMIS-39100 can be connected to a 3.3V or 5V microcontroller by means of a SPI interface. This SPI interface is used to control
each of the output drivers individually (on or off) and to read the status of each individual output driver (read-back of possible error
conditions). This allows the detection of error situations for each driver individually. Furthermore, the SPI interface can be used to read-
back the status of the built-in thermal shutdown protection. The AMIS-39100 has a low-power mode and excellent handling and system
ESD characteristics.
2.0 Key Features
• Eight HS drivers
• Up to 830mA continuous current per driver pair (resistive load)
• Charge pump with one external capacitor
• Serial peripheral interface (SPI)
• Short circuit protection
• Diagnostic features
• Power-down mode
• Internal thermal shutdown
• 3.3V and 5V microcontroller compliant
• Excellent system ESD
• Automotive compliant
• SO28 package with low Rthja
3.0 Typical Applications
• Automotive dashboard
• Automotive load management
• Actuator control
• LED driver applications
• Relays and solenoids
• Industrial process control
4.0 Ordering Information
Product Name
AMIS39100AGA
Package
PSOP 300-28 (JEDEC MS-013)
Temperature Range
-40°C…105°C
AMI Semiconductor – Jan. 07, M-20557-002
www.amis.com
1
http://www.Datasheet4U.com
1 page AMIS-39100: Octal High Side Driver with Protection
Data Sheet
8.0 Electrical and Environmental Ratings
8.1 Absolute Maximum Ratings
Stress levels above those listed in this paragraph may cause immediate and permanent device failure. It is not recommended that
more than one of these conditions be applied simultaneously.
Table 3: Absolute Maximum Ratings
Symbol
VDDN
Description
Power supply voltage
Min.
GND - 0.3
VB
DC battery supply on pins VB1 to VB4 load dump,
Pulse 5b 400ms
GND - 0.3
Iout_ON
Maximum output current OUTx pins(1)
The HS driver is switched on
-3000
Iout_OFF
Maximum output current OUTx pins(1)
The HS driver is switched off
-350
I_OUT_VB
Vcapa1
Vdig_in
VESD
Maximum output current VB1, 2, 3, 4 pins
DC voltage on pins capa1
Voltage on digital inputs CLK, PDB, WR, DIN
Pins that connect the application (pins VB1..4 and Out1..8)(2)
All other pins(2)
-700
0
-0.3
-4
-2
VESD
Tj
ESD according charged device model(3)
Junction temperature (T<100 hours)
-750
-40
Tmr Ambient temperature under bias
-40
Notes:
(1)
(2)
(3)
The power dissipation of the chip must be limited not to exceed the maximum junction temperature Tj.
According to HBM standard MIL-STD-883 method 3015.7
According to norm EOS/ESD-STM5.3.1-1999 robotic mode
Max.
6
35
350
350
3750
VB+16.5
VDDN+0.3
+4
+2
+750
175
105
Unit
V
V
mA
mA
mA
V
V
kV
kV
V
°C
°C
AMI Semiconductor – Jan. 07, M-20557-002
www.amis.com
5
5 Page AMIS-39100: Octal High Side Driver with Protection
Data Sheet
PD
50%
VOUTi
t_PD_recov
90% {VBi - 1V}
t
PC20070110.7
Figure 5: Timing for Power-down Recovery
DOUT
DIN
INPUT REGISTER
CMD8 CMD DRIVER CMD1
OUTPUT REGISTE R
DIAG
8 STA TE DI AG
DIAG
1
CO MMAND REGI STER
CMD8
MEMOCMD
CMD1
CMDx
MEM ORY DIAG
DIAG
8
MEMODIAG
DIAG
1
High Side
Driver
DIAGx
OUTx
Figure 6: SPI Block Diagram
AMI Semiconductor – Jan. 07, M-20557-002
www.amis.com
11
11 Page |
Páginas | Total 16 Páginas | |
PDF Descargar | [ Datasheet AMIS-39100.PDF ] |
Número de pieza | Descripción | Fabricantes |
AMIS-39100 | Octal High Side Driver | AMI SEMICONDUCTOR |
AMIS-39100 | Octal High Side Driver | ON Semiconductor |
AMIS-39101 | Octal High-Side Driver | AMI SEMICONDUCTOR |
AMIS-39101 | Octal High Side Driver | ON Semiconductor |
Número de pieza | Descripción | Fabricantes |
SLA6805M | High Voltage 3 phase Motor Driver IC. |
Sanken |
SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
Analog Devices |
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |