|
|
Número de pieza | 3386 | |
Descripción | Trimming Potentiometer | |
Fabricantes | Bourns | |
Logotipo | ||
Hay una vista previa y un enlace de descarga de 3386 (archivo pdf) en la parte inferior de esta página. Total 3 Páginas | ||
No Preview Available ! Features
■ Single Turn / Cermet / Industrial / Sealed
■ Available on tape and reel
■ Available with a knob for finger adjust
■ Available with extended shaft
■ Available with cross-slot rotor
■ Top and side adjust types (F, P, H, W, X
most popular)
■ RoHS compliant* version available
■ For trimmer applications/processing
guidelines, click here
3386 - 3/8 ” Square Trimpot® Trimming Potentiometer
Electrical Characteristics
Product Dimensions
Standard Resistance Range
......................10 ohms to 2 megohms
(see standard resistance table)
Resistance Tolerance ........... ±10 % std.
(tighter tolerance available)
Absolute Minimum Resistance
....................................... 2 ohms max.
Contact Resistance Variation
........................... 2 % or 3 ohms max.
Common Dimensions
Side Adjust Models B,C,J,X
ADJ. SLOT
.76
(.030)
WIDE
X .76 DEEP
(.030)
X 3.15
(.124)
LONG
.38
(.015)
MIN.
9.53
(.375)
9.53
(.375)
(whichever is greater)
Adjustability
Voltage Divider ...................... ±0.05 %
Rheostat................................ ±0.15 %
5.97 ± .89
(.235 ± .035)
5.33
(.210)
.51 ± .05 DIA. PINS
(.020 ± .002)
Resolution ................................... Infinite
Insulation Resistance ............... 500 vdc.
1,000 megohms min.
3386B
4.83
(.190)
Dielectric Strength
Sea Level................................ 900 vac
70,000 Feet ............................ 350 vac
Adjustment Angle ................. 280 ° nom.
3.56 ± .25
(.140 ± .010)
3 21
3.81
(.150)
3.81
(.150)
Environmental Characteristics
Power Rating (300 volts max.)
85 °C ...................................... 0.5 watt
125 °C ....................................... 0 watt
Temperature Range ... -55 °C to +125 °C
Temperature Coefficient ... ±100 ppm/°C
3386C
3.56 ± .25
(.140 ± .010)
2.54
(.100)
321
2.54
(.100)
Seal Test ......................85 °C Fluorinert†
Humidity .......MIL-STD-202 Method 103
96 hours
3386J
3 21
(2 % ΔTR, 10 Megohms min.)
Vibration ....... 30 G (1 % ΔTR; 1 % ΔVR)
Shock ......... 100 G (1 % ΔTR; 1 % ΔVR)
Load Life.. 1,000 hours 0.5 watt @ 70 °C
2.44
(.096)
3.81
(.150)
3.81
(.150)
(3 % ΔTR; 3 % or 3 ohms,
whichever is greater, CRV)
3386X
2.54
(.100)
2
Rotational Life .......................200 cycles
31
(4 % ΔTR; 3 % or 3 ohms,
whichever is greater, CRV)
1.40 ± .25
(.055 ± .010) 2.54
2.54
(.100)
(.100)
Physical Characteristics
Mechanical Angle ................. 310 ° nom.
Standard Resistance Table
Torque............................. 5.0 oz-in. max.
Stop Strength ............... 15.0 oz -in. min.
Resistance
(Ohms)
Resistance
Code
Terminals .......................Solderable pins
Weight ....................................... 0.03 oz.
Marking........................... Manufacturer’s
trademark, resistance code,
wiring diagram, date code,
manufacturer’s model
number and style
Flammability ..........................U.L. 94V-0
Standard Packaging.....50 pcs. per tube
Wiper ............... 50 % (Actual TR) ±10 %
Adjustment Tool..............................H-90
*RoHS Directive 2002/95/EC Jan. 27, 2003 including
annex and RoHS Recast 2011/65/EU June 8, 2011.
†“Fluorinert” is a registered trademark of 3M Co.
Specifications are subject to change without notice.
The device characteristics and parameters in this data
10
20
50
100
200
500
1,000
2,000
5,000
10,000
20,000
25,000
50,000
100,000
200,000
250,000
500,000
1,000,000
2,000,000
100
200
500
101
201
501
102
202
502
103
203
253
503
104
204
254
504
105
205
Popular distribution resistance values listed in
boldface. Special resistances available.
sheet can and do vary in different applications and actual device performance may vary over time.
Users should verify actual device performance in their specific applications.
Common Dimensions
Side Adjust Models H,S,W
ADJ. SLOT
.76
(.030)
WIDE
X .76 DEEP
(.030)
X 3.15
(.124)
LONG
.38
(.015)
MIN.
9.53
(.375)
9.53
(.375)
3386H
5.97 ± .89
(.235 ± .035)
2.54
(.100)
1.40 ± .25
(.055 ± .010)
3386S
5.64
(.222)
.51 ± .05 DIA. PINS
(.020 ± .002)
2
13
2.54
(.100)
2.54
(.100)
1 23
3386W
2.44
(.096)
3.81
(.150)
3.81
(.150)
123
2.44
(.096)
2.54
(.100)
2.54
(.100)
DIMENSIONS:
TOLERANCES: ±
0.25
(.010)
MM
(INCHES)
EXCEPT WHERE NOTED
How To Order
3386 P - 1 - 103 T __ LF
Model
Style
Standard or Modified
Product Indicator
-1 = Standard Product
-EY5 = Extended Shaft
Resistance Code
Optional Suffix Letter
T = Knob**
Packaging Designator
Blank = Tube (Standard)
R = Tape & Reel (W and U Pin Styles Only)
A = Ammo Pack (W and U Pin Styles Only)
Terminations
LF = 100 % Tin-plated (RoHS compliant)
Blank = 90 % Tin / 10 % Lead-plated
(Standard)
**Knob option is available only in standard tube
packaging. Not recommended for side load
applications.
Consult factory for other available options.
Free Datasheet http://www.datasheet-pdf.com/
1 page |
Páginas | Total 3 Páginas | |
PDF Descargar | [ Datasheet 3386.PDF ] |
Número de pieza | Descripción | Fabricantes |
33800 | Engine Control Integrated Circuit | Freescale Semiconductor |
33810 | Automotive Engine Control IC | Freescale Semiconductor |
33811 | Solenoid Monitor Integrated Circuit | Freescale Semiconductor |
33812 | Multifunctional Ignition and Injector Driver | Freescale Semiconductor |
Número de pieza | Descripción | Fabricantes |
SLA6805M | High Voltage 3 phase Motor Driver IC. |
Sanken |
SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
Analog Devices |
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |