|
|
Teilenummer | EPC11 |
|
Beschreibung | HEATING REGULATOR manual | |
Hersteller | ENERPIPE | |
Logo | ||
Gesamt 18 Seiten HEATING REGULATOR EPC11
End user manual
www.enerpipe.de
Free Datasheet http://www.datasheet-pdf.com/
2 Regulator
2.1 Key allocation
Correction Day-/
Night Mode
(-4,0°C to +4,0°C or
-8,0°C to 0,0°C)
Abort Key
„Escape“
Navigation Key
„Up“
Confirm Key
„Enter“
Navigation Key
„Down“
Modes
OFF / Antifreeze
Lowering Mode
Heating Mode
Automatic Mode
Boiler Mode
Party-Modus
MAINTANANCE
(Blue)
(Orange)
(Orange)
(Green)
(Orange)
(Orange)
(Red)
6
Free Datasheet http://www.datasheet-pdf.com/
6 Page 3.5 Heating circuits
A heating circuit stands for a cycle of heated water through a heating system (such as
radiators, floor heating, etc.).
CAUTION: If the regulator’s selector switch
is set to OFF/Antifreeze, boiler
charging or maintenance, the
selector switch of the regulator
will have priority over the remote control.
Mode
This indicates the current operation mode of
the heating circuit.
Figure 8: Heating circuit menu without room control
Selector switch
The operation mode of the regulator is applicable. However, if it is set to the heating,
lowering mode or to OFF, the remote control will have priority.
Party mode
If the party mode has been set for the heating circuit, the heating circuit will switch to the
heating mode for the period of time set for the party mode. Once this period of time has
expired, the heating circuit will return to the previous operation mode.
Timer program
Regardless of the selector switch or remote
control, the heating circuit is in heating
mode during heating times, and in the
lowering mode outside the heating times.
He ating mode
The heating circuit is continuous in the heating
mode.
Lowering mode
The heating circuit is continuous in the lowering mode.
Figure 9: Heating circuit menu with room control
OFF / Antifreeze
No control function of the heating circuit at all, except of the antifreeze function.
Required room temperature
The desired required room temperature can be set here. However, the required room
temperature will be visible only if a room remote control has been connected.
Room temperature
This indicates the current room temperature of the heating circuit. However, the room
temperature will be visible only if a room remote control or a sensor has been connected.
Required temperature of initial operation
This indicates the current required initial operation of the heating circuit. Moreover,
the „switch-off temperatures“ can be configured here as well.
12
Free Datasheet http://www.datasheet-pdf.com/
12 Page | ||
Seiten | Gesamt 18 Seiten | |
PDF Download | [ EPC11 Schematic.PDF ] |
Teilenummer | Beschreibung | Hersteller |
EPC1 | Configuration Devices | Altera Corporation |
EPC10 | EPC Cores | ACME |
EPC1001 | Enhancement Mode Power Transistor | EPC |
EPC1005 | Enhancement Mode Power Transistor | EPC |
EPC1007H | Ethernet DC/DC Converter | PCA Electronics |
Teilenummer | Beschreibung | Hersteller |
CD40175BC | Hex D-Type Flip-Flop / Quad D-Type Flip-Flop. |
Fairchild Semiconductor |
KTD1146 | EPITAXIAL PLANAR NPN TRANSISTOR. |
KEC |
www.Datenblatt-PDF.com | 2020 | Kontakt | Suche |