Datenblatt-pdf.com


WS2812 Schematic ( PDF Datasheet ) - Worldsemi

Teilenummer WS2812
Beschreibung Intelligent control LED
Hersteller Worldsemi
Logo Worldsemi Logo 




Gesamt 5 Seiten
WS2812 Datasheet, Funktion
Free Datasheet http://www.datasheet-pdf.com/
WS2812
Intelligent control LED
integrated light source
Features and Benefits
l Control circuit and RGB chip are integrated in a package of 5050 components, form a complete control of pixel
point.
l Built-in signal reshaping circuit, after wave reshaping to the next driver, ensure wave-form distortion not
accumulate.
l Built-in electric reset circuit and power lost reset circuit.
l Each pixel of the three primary color can achieve 256 brightness display, completed 16777216 color full color
display, and scan frequency not less than 400Hz/s.
l Cascading port transmission signal by single line.
l Any two point the distance more than 5m transmission signal without any increase circuit.
l When the refresh rate is 30fps, low speed model cascade number are not less than 512 points, high speed mode not
less than1024 points.
l Send data at speeds of 800Kbps.
l The color of the light were highly consistent, cost-effective..
Applications
l Full-color module, Full color soft lights a lamp strip.
l LED decorative lighting, Indoor/outdoor LED video irregular screen.
General description
WS2812 is a intelligent control LED light source that the control circuit and RGB chip are integrated in
a package of 5050 components. It internal include intelligent digital port data latch and signal reshaping amplif
ication drive circuit. Also include a precision internal oscillator and a 12V voltage programmable constant curre
-nt control part, effectively ensuring the pixel point light color height consistent.
The data transfer protocol use single NZR communication mode. After the pixel power-on reset, the DIN
port receive data from controller, the first pixel collect initial 24bit data then sent to the internal data latch,
the other data which reshaping by the internal signal reshaping amplification circuit sent to the next cascade
pixel through the DO port. After transmission for each pixelthe signal to reduce 24bit. pixel adopt auto resha
-ping transmit technology, making the pixel cascade number is not limited the signal transmission, only depend
on the speed of signal transmission.
LED with low driving voltage, environmental protection and energy saving, high brightness, scattering angl
e is large, good consistency, low power, long life and other advantages. The control chip integrated in LED
above becoming more simple circuit, small volume, convenient installation.
http://www.world-semi.com





SeitenGesamt 5 Seiten
PDF Download[ WS2812 Schematic.PDF ]

Link teilen




Besondere Datenblatt

TeilenummerBeschreibungHersteller
WS2811Signal line 256 Gray level 3 channal Constant current LED drive ICWorldSemi
WorldSemi
WS2812Intelligent control LEDWorldsemi
Worldsemi
WS2812BIntelligent control LEDWorldsemi
Worldsemi

TeilenummerBeschreibungHersteller
CD40175BC

Hex D-Type Flip-Flop / Quad D-Type Flip-Flop.

Fairchild Semiconductor
Fairchild Semiconductor
KTD1146

EPITAXIAL PLANAR NPN TRANSISTOR.

KEC
KEC


www.Datenblatt-PDF.com       |      2020       |      Kontakt     |      Suche