Datenblatt-pdf.com


CA100 Schematic ( PDF Datasheet ) - Omega

Teilenummer CA100
Beschreibung COMPACT CAL MANUAL
Hersteller Omega
Logo Omega Logo 




Gesamt 30 Seiten
CA100 Datasheet, Funktion
COMPACT CAL
M-2911
Free Datasheet http://www.datasheet-pdf.com/






CA100 Datasheet, Funktion
Fuse
To prevent a fire, be sure to use fuses with the specified ratings
(voltage, current, type). Before replacing fuses, turn the power off
and disconnect the power source if you are using an AC power
supply kit. Do not short-circuit the fuse holder.
Removing Covers
There are some areas under high voltage. Do not remove the
cover if the power supply is connected. The cover should be
removed by qualified personnel only.
To use the AC power supply kit (optional) safely, please comply with the
following precautions.
WARNING
Protective Grounding
To prevent electrical shock, be sure to connect the protective
grounding before turning on the power.
Power Cord and Plug
To prevent electrical shock or fire, be sure to use the supplied
power cord. The main power plug can only be plugged in an outlet
with a protective grounding terminal. Do not invalidate protection
by using an extension cord without protective grounding.
Power Supply
Ensure that the source voltage matches the voltage of the power
supply before turning on the power.
5
Free Datasheet http://www.datasheet-pdf.com/

6 Page









CA100 pdf, datenblatt
LCD Screen
7 Output on and off key
Turns output on and off.
8 +/- key
Toggles the polarity of the output value.
9 NEXT ENTER key
This switches the associated settings when setting the output values for the
frequency and pulse signal. It also fixes the entered value when using the numeric
keypad (refer to the following description).
10 ZERO CLR key
This resets the output value set to zero when using the up/down key (refer to the
following description). When using the numeric keypad (refer to the following
description), the value being entered is canceled and the previous set value is
restored.
11 Output value setting keys
This sets the output value for the generation function. Either of the following two
key modes can be selected from the menu. The up/down key mode is selected as the
factory default setting.
Up/down key: This increments or decrements the values by one count for each digit
corresponding to the [ ]/[ ]. If you try to increment or decrement using this key
with value 9 or 0, the current digit moves up or down by one digit.
Numeric keypad: This enters numbers 0 to 9 directly from the keypad.
12 Decimal point key
This enters the decimal point when using the numeric keypad (refer to the above
description). When this key is pressed, the digits to the left of the decimal point
move to the positions specified on a range basis. When using the up/down key, this
key is unavailable.
Operation keys for measurement
13 Display hold key
This retains displayed values as they are.
14 Range selection key
This selects the measurement range.
15 Function selection key
This selects one of the measuring functions: voltage, current, or resistance.
16 Measurement on and off key
This turns measurement on and off.
1
2
3
CHARGE END
AVERAGE
MEASURE
DCV
mV DCV
4
DCA
HOLD
mA DCA
k
TC
RTD SOURCE
FRQ
5 PULSE
ON
OFF
ITS-90 IPTS-68
INT RJC BRKE JTN Pt100
mV
mA
kC
F
6 SOURCE
24V OUT
kHz MEASURE
CYCLES
11
10
9
8
7
1 State-of-charge indicator
When using Ni-Cd batteries (optional), this indicates its charge status (CHARGE
indicates charging is taking place and CHARGE END indicates charging has
completed).
2 Low-battery indicator
This lights up when the battery becomes weak.
11
Free Datasheet http://www.datasheet-pdf.com/

12 Page





SeitenGesamt 30 Seiten
PDF Download[ CA100 Schematic.PDF ]

Link teilen




Besondere Datenblatt

TeilenummerBeschreibungHersteller
CA10SURFACE MOUNT ESD SUPPRESSORS/ 8-Line CA10Littelfuse
Littelfuse
CA100COMPACT CAL MANUALOmega
Omega
CA1004Micropower Voltage ReferenceCalogic
Calogic
CA1021Cascadable Amplifier 10 to 1000 MHzTyco Electronics
Tyco Electronics
CA1031Cascadable Amplifier 10 to 1000 MHzTyco Electronics
Tyco Electronics

TeilenummerBeschreibungHersteller
CD40175BC

Hex D-Type Flip-Flop / Quad D-Type Flip-Flop.

Fairchild Semiconductor
Fairchild Semiconductor
KTD1146

EPITAXIAL PLANAR NPN TRANSISTOR.

KEC
KEC


www.Datenblatt-PDF.com       |      2020       |      Kontakt     |      Suche