|
|
Número de pieza | CLA4603-085LF | |
Descripción | Surface Mount Limiter Diode | |
Fabricantes | Skyworks Solutions | |
Logotipo | ||
Hay una vista previa y un enlace de descarga de CLA4603-085LF (archivo pdf) en la parte inferior de esta página. Total 8 Páginas | ||
No Preview Available ! DATA SHEET
CLA4603-085LF: Surface Mount Limiter Diode
Applications
• Low loss, high power limiters
• Receiver protectors
Features
• Low thermal resistance: 96 °C/W
• Typical threshold level: +9 dBm
• Low capacitance: 0.33 pF
• Low profile, ultra-miniature QFN (3-pin, 2 x 2 mm) package
(MSL1, 260 °C per JEDEC J-STD-020)
Figure 1. CLA4603-085LF Block Diagram
Description
The CLA4603-085LF is a surface mountable, low capacitance
silicon PIN limiter diode designed as a shunt connected PIN diode
for high power limiter applications from 10 MHz to over 6 GHz.
Maximum resistance at 10 mA is 2 Ω and maximum capacitance
at 6 V is 0.4 pF. The combination of low junction capacitance, low
parasitic inductance, low thermal resistance, and nominal 1.5 μm
I-region width, makes the CLA4603-085LF useful in large signal
limiter applications. The threshold level is +9 dBm, nominal.
A block diagram of the CLA4603-085LF is shown in Figure 1. The
absolute maximum ratings of the CLA4603-085LF are provided in
Table 1. Electrical specifications are provided in Table 2.
Typical performance characteristics of the CLA4603-085LF are
provided in Table 3 and illustrated in Figure 4.
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [email protected] • www.skyworksinc.com
201637F • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • June 13, 2013
1
Free Datasheet http://www.datasheet4u.net/
1 page DATA SHEET • CLA4603-085LF SURFACE MOUNT LIMITER DIODE
Figure 6. CLA4603-085LF Electrically Equivalent Circuit
Figure 7. CLA4603-085LF PCB Layout Footprint
Package Dimensions
The PCB layout footprint for the CLA4603-085LF is shown in
Figure 7. Typical case markings are shown in Figure 8. Package
dimensions for the 3-pin QFN are provided in Figure 9, and
Figure 10 provides the tape and reel dimensions.
Package and Handling Information
Instructions on the shipping container label regarding exposure to
moisture after the container seal is broken must be followed.
Otherwise, problems related to moisture absorption may occur
when the part is subjected to high temperature during solder
assembly.
The CLA4603-085LF is rated to Moisture Sensitivity Level 1
(MSL1) at 260 °C. It can be used for lead or lead-free soldering.
For additional information, refer to the Skyworks Application Note,
Solder Reflow Information, document number 200164.
Care must be taken when attaching this product, whether it is
done manually or in a production solder reflow environment.
Production quantities of this product are shipped in a standard
tape and reel format.
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [email protected] • www.skyworksinc.com
201637F • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • June 13, 2013
5
Free Datasheet http://www.datasheet4u.net/
5 Page |
Páginas | Total 8 Páginas | |
PDF Descargar | [ Datasheet CLA4603-085LF.PDF ] |
Número de pieza | Descripción | Fabricantes |
CLA4603-085LF | Surface Mount Limiter Diode | Skyworks Solutions |
Número de pieza | Descripción | Fabricantes |
SLA6805M | High Voltage 3 phase Motor Driver IC. |
Sanken |
SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
Analog Devices |
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |