|
|
Teilenummer | ADC081C021 |
|
Beschreibung | (ADC081C021 / ADC081C027) 12-Bit Analog-to-Digital Converter | |
Hersteller | National Semiconductor | |
Logo | ||
Gesamt 30 Seiten January 17, 2008
ADC121C021/ADC121C027
I2C-Compatible, 12-Bit Analog-to-Digital Converter (ADC)
with Alert Function
General Description
The ADC121C021 is a low-power, monolithic, 12-bit, analog-
to-digital converter(ADC) that operates from a +2.7 to 5.5V
supply. The converter is based on a successive approxima-
tion register architecture with an internal track-and-hold circuit
that can handle input frequencies up to 11MHz. The
ADC121C021 operates from a single supply which also
serves as the reference. The device features an
I2C-compatible serial interface that operates in all three speed
modes, including high speed mode (3.4MHz).
The ADC's Alert feature provides an interrupt that is activated
when the analog input violates a programmable upper or low-
er limit value. The device features an automatic conversion
mode, which frees up the controller and I2C interface. In this
mode, the ADC continuously monitors the analog input for an
"out-of-range" condition and provides an interrupt if the mea-
sured voltage goes out-of-range.
The ADC121C021 comes in a small TSOT-6 package with an
alert output. The ADC121C027 comes in a small TSOT-6
package with an address selection input. The ADC121C027
provides three pin-selectable addresses. Pin-compatible al-
ternatives are available with additional address options.
Normal power consumption using a +3V or +5V supply is
0.26mW or 0.78mW, respectively. The automatic power-
down feature reduces the power consumption to less than
1µW while not converting. Operation over the industrial tem-
perature range of −40°C to +105°C is guaranteed. Their low
power consumption and small packages make this family of
ADCs an excellent choice for use in battery operated equip-
ment.
The ADC121C021 and ADC121C027 are part of a family of
pin-compatible ADCs that also provide 8 and 10 bit resolution.
For 8-bit ADCs see the ADC081C021 and ADC081C027. For
10-bit ADCs see the ADC101C021 and ADC101C027.
Features
■ I2C-Compatible 2-wire Interface which supports standard
(100kHz), fast (400kHz), and high speed (3.4MHz) modes
■ Extended power supply range (+2.7V to +5.5V)
■ Up to four pin-selectable chip addresses
■ Out-of-range Alert Function
■ Automatic Power-down mode while not converting
■ Very small 6-pin TSOT packages
■ ±8kV HBM ESD protection (SDA, SCL)
Key Specifications
■ Resolution
12 bits; no missing codes
■ Conversion Time
1µs (typ)
■ INL & DNL
±1 LSB (max) (up to 22kSPS)
■ Throughput Rate
188.9kSPS (max)
■ Power Consumption (at 22kSPS)
— 3V Supply
0.26 mW (typ)
— 5V Supply
0.78 mW (typ)
Applications
■ System Monitoring
■ Peak Detection
■ Portable Instruments
■ Medical Instruments
■ Test Equipment
Pin-Compatible Alternatives
All devices are fully pin and function compatible.
Resolution ALERT Output
ADDR Input
12-bit
ADC121C021
ADC121C027
10-bit
ADC101C021
ADC101C027
8-bit
ADC081C021
ADC081C027
Connection Diagrams
30020901
I2C® is a registered trademark of Phillips Corporation.
© 2008 National Semiconductor Corporation
300209
30020902
www.national.com
Free Datasheet http://www.datasheet4u.com/
Symbol
Parameter
Conditions
Typical
(Note 9)
Limits
(Note 9)
POWER REQUIREMENTS
Supply Voltage Minimum
VA Supply Voltage Maximum
2.7
5.5
Continuous Operation Mode -- 2-wire interface active.
IN Supply Current
fSCL=400kHz
fSCL=3.4MHz
VA = 2.7V to 3.6V
VA = 4.5V to 5.5V
VA = 2.7V to 3.6V
VA = 4.5V to 5.5V
0.08
0.16
0.37
0.74
0.14
0.30
0.55
0.99
PN Power Consumption
fSCL=400kHz
fSCL=3.4MHz
VA = 3.0V
VA = 5.0V
VA = 3.0V
VA = 5.0V
0.26
0.78
1.22
3.67
Automatic Conversion Mode -- 2-wire interface stopped and quiet (SCL = SDA = VA). fSAMPLE = TCONVERT * 32
IA Supply Current
VA = 2.7V to 3.6V
VA = 4.5V to 5.5V
0.41
0.78
0.59
1.2
PA Power Consumption
VA = 3.0V
VA = 5.0V
1.35
3.91
Power Down Mode (PD1) -- 2-wire interface stopped and quiet. (SCL = SDA = VA).(Note 10)
IPD1 Supply Current
0.1 0.2
PPD1 Power Consumption
0.5 0.9
Power Down Mode (PD2) -- 2-wire interface active. Master communicating with a different device on the bus.
IPD2 Supply Current
fSCL=400kHz
fSCL=3.4MHz
VA = 2.7V to 3.6V
VA = 4.5V to 5.5V
VA = 2.7V to 3.6V
VA = 4.5V to 5.5V
13
27
89
168
45
80
150
250
PPD2 Power Consumption
fSCL=400kHz
fSCL=3.4MHz
VA = 3.0V
VA = 5.0V
VA = 3.0V
VA = 5.0V
0.04
0.14
0.29
0.84
Units (Limits)
V (min)
V (max)
mA (max)
mA (max)
mA (max)
mA (max)
mW
mW
mW
mW
mA (max)
mA (max)
mW
mW
µA (max)
µW (max)
µA (max)
µA (max)
µA (max)
µA (max)
mW
mW
mW
mW
www.national.com
6
Free Datasheet http://www.datasheet4u.com/
6 Page ENOB vs. Supply
SINAD vs. Supply
FFT Plot
30020928
FFT Plot
30020929
30020930
Offset Error vs. Temperature
30020931
Gain Error vs. Temperature
www.national.com
30020932
12
30020933
Free Datasheet http://www.datasheet4u.com/
12 Page | ||
Seiten | Gesamt 30 Seiten | |
PDF Download | [ ADC081C021 Schematic.PDF ] |
Teilenummer | Beschreibung | Hersteller |
ADC081C021 | (ADC081C021 / ADC081C027) 12-Bit Analog-to-Digital Converter | National Semiconductor |
ADC081C021 | I2C-Compatible 8-Bit ADC with Alert Function (Rev. C) | Texas Instruments |
ADC081C021 | I2C-Compatible 8-Bit ADC with Alert Function (Rev. C) | Texas Instruments |
ADC081C027 | (ADC081C021 / ADC081C027) 12-Bit Analog-to-Digital Converter | National Semiconductor |
ADC081C027 | ADC081C021/C027 I2C-Compatible 8-Bit ADC with Alert Function (Rev. C) | Texas Instruments |
Teilenummer | Beschreibung | Hersteller |
CD40175BC | Hex D-Type Flip-Flop / Quad D-Type Flip-Flop. |
Fairchild Semiconductor |
KTD1146 | EPITAXIAL PLANAR NPN TRANSISTOR. |
KEC |
www.Datenblatt-PDF.com | 2020 | Kontakt | Suche |