Datenblatt-pdf.com


GS2986 Schematic ( PDF Datasheet ) - Gennum

Teilenummer GS2986
Beschreibung Multi-Rate SDI Reclocker
Hersteller Gennum
Logo Gennum Logo 




Gesamt 30 Seiten
GS2986 Datasheet, Funktion
GS2986 Multi-Rate SDI Reclocker with Equalization & De-emphasis
Features
• SMPTE 424M, SMPTE 292M and SMPTE 259M-C compliant
• Supports DVB-ASI at 270Mb/s
• Single supply operation at 3.3V or 2.5V
• 180mW typical power consumption (213mW with RCO
enabled) at 2.5V
• Input signal equalization and output-signal de-emphasis
settings to compensate for board-trace dielectric losses
• 4:1 input multiplexer patented technology
• Choice of dual reclocked data outputs or one reclocked data
output and one clock output
• Uses standard 27MHz crystal
• Cascadable crystal buffer supports multiple reclockers using
a single crystal
• Differential inputs and outputs
Š support DC coupling to industry-standard differential
logic
Š on-chip 100Ω differential data input/output termination
Š selectable 400mVppd or 800mVppd output swing on
each output
Š seamless interface to other Gennum products
• 4 wire SPI host interface for device configuration and
monitoring
Standard logic control and status signal levels
• Auto and Manual modes for rate selection
• Standards indication in Auto mode
• Lock Detect Output
• Mute, Bypass and Autobypass functions
• SD/HD indication output to control GS2978 or GS2988 dual
slew-rate cable drivers
• Operating temperature range: -40°C to +85°C
• Small footprint QFN package (6mm x 6mm)
• Pb-free and RoHS compliant
Applications
• SMPTE 424M, SMPTE 292M and SMPTE 259M-C coaxial
cable serial digital interfaces
Description
The GS2986 is a multi-rate serial digital reclocker designed to
automatically recover the embedded clock from a digital video
signal and retime the incoming video data. It will recover the
embedded clock signal and retime the data from a SMPTE 424M,
SMPTE 292M, or SMPTE 259M-C compliant digital video signal.
A serial host interface provides the ability to configure and
monitor multiple GS2986 devices in a daisy-chain configuration.
Adjustable input trace equalization (EQ) for up to 40” of FR4 trace
losses, and adjustable output de-emphasis (DE) for up to 20” of
FR4 trace losses, can be configured via the host interface.
The GS2986 can operate in either auto or manual rate selection
mode. In Auto mode, the device will automatically detect and lock
onto incoming SMPTE SDI data signals at any supported rate. For
single rate data systems, the GS2986 can be configured to operate
in Manual mode. In both modes, the device requires only one
external crystal to set the VCO frequency when not locked and
provides adjustment free operation.
The GS2986 accepts industry-standard differential input levels
including LVPECL and CML. The differential data and clock
outputs feature selectable output swing via the host interface,
ensuring compatibility with most industry-standard, terminated
differential receivers.
The GS2986 features dual differential outputs. The second output
can be configured to emit either the recovered clock signal or the
re-timed video data. This output can also be disabled to save
power.
In systems which require passing of non-SMPTE data rates, the
GS2986 can be configured to either automatically or manually
enter a bypass mode in order to pass the signal without reclocking.
The GS2986 is Pb-free, and the encapsulation compound does not
contain halogenated flame retardant. This component and all
homogeneous sub-components are RoHS compliant.
GS2986 Multi-Rate SDI Reclocker with Equalization &
De-emphasis
Data Sheet
52134 - 1
March 2010
www.gennum.com
1 of 41
Free Datasheet http://www.datasheet4u.com/






GS2986 Datasheet, Funktion
1.2 Pin Descriptions
Table 1-1: GS2986 Pin Descriptions
Pin Number
1
Name
CP_CAP
Type
Power
2, 4
3
5, 6
7, 8
9, 10
11
12, 13
DDI0, DDI0
HIF
DDI1, DDI1
DDI2, DDI2
DDI3, DDI3
RSVD
DDI_SEL[0:1]
Input
Logic Input
Input
Input
Input
Reserved
Logic Input
14
VCC_VCO
Power
15
VEE_VCO
Power
16
VDD_1P8
Power
17
LOCKED
Output
18 LOS Output
19
VDD_DIG
Power
20
VSS_DIG
Power
21
SD/HD
Output
22
DDO1_DISABLE
Logic Input
23, 24
25
26
27, 28
DDO1/RCO,
DDO1/RCO
VCC_DDO1
VEE_DDO1
DDO0, DDO0
Output
Power
Power
Output
Description
External capacitor for internal LDO regulator supplying the charge pump
circuit.
Serial Digital Differential Input 0.
Host interface selection pin. Active-low input. See Section 4.15.1.
Serial Digital Differential Input 1.
Serial Digital Differential Input 2.
Serial Digital Differential Input 3.
Reserved pin. Do not connect to this pin.
Selects one of four serial digital input signals for processing. See
Section 4.4.
Most positive power supply connection for the internal
VCO section. Connect to a 3.3V supply with a 422Ω resistor, or to a 2.5V
supply with a 267Ω resistor.
Most negative power supply connection for the internal
VCO section. Connect to GND.
External capacitor for internal 1.8V digital supply.
Lock Detect status signal. HIGH when the PLL is locked.
Loss Of Signal status. HIGH when the input signal is invalid.
Most positive power supply connection for the digital core.
Connect to 3.3V or 2.5V.
Most negative power supply for the digital core.
Connect to GND.
This signal will be LOW for all rates other than 270Mb/s.
This signal is HIGH for 270Mb/s.
Disables the DDO1/RCO and DDO1/RCO outputs
when LOW.
See Section 4.14.
Differential serial clock or data outputs.
Most positive power supply connection for the DDO1/DDO1 output driver.
Connect to 3.3V or 2.5V.
Most negative power supply connection for the DDO1/DDO1 output
driver. Connect to GND.
Differential Serial Digital Outputs.
GS2986 Multi-Rate SDI Reclocker with Equalization &
De-emphasis
Data Sheet
52134 - 1
March 2010
6 of 41
Free Datasheet http://www.datasheet4u.com/

6 Page









GS2986 pdf, datenblatt
Table 2-2: AC Electrical Characteristics (Continued)
Parameter
Eye Cross Shift
Power Supply Noise Rejection
Symbol
Conditions
percentage of signal
amplitude
50 - 100Hz
100Hz - 10MHz
10MHz - 1.485GHz
Min Typ Max Units Notes
− −5%
100 mVp-p
40 mVp-p
10 mVp-p
GS2986 Multi-Rate SDI Reclocker with Equalization &
De-emphasis
Data Sheet
52134 - 1
March 2010
12 of 41
Free Datasheet http://www.datasheet4u.com/

12 Page





SeitenGesamt 30 Seiten
PDF Download[ GS2986 Schematic.PDF ]

Link teilen




Besondere Datenblatt

TeilenummerBeschreibungHersteller
GS2984Adaptive Cable EqualizerGennum
Gennum
GS2985Multi-Rate SDI ReclockerSemtech
Semtech
GS2985Multi-Rate SDI ReclockerGennum
Gennum
GS2986Multi-Rate SDI ReclockerGennum
Gennum
GS2986Multi-Rate SDI ReclockerSemtech
Semtech

TeilenummerBeschreibungHersteller
CD40175BC

Hex D-Type Flip-Flop / Quad D-Type Flip-Flop.

Fairchild Semiconductor
Fairchild Semiconductor
KTD1146

EPITAXIAL PLANAR NPN TRANSISTOR.

KEC
KEC


www.Datenblatt-PDF.com       |      2020       |      Kontakt     |      Suche