DataSheet.es    


PDF AD8634 Data sheet ( Hoja de datos )

Número de pieza AD8634
Descripción Low Power Operational Amplifier
Fabricantes Analog Devices 
Logotipo Analog Devices Logotipo



Hay una vista previa y un enlace de descarga de AD8634 (archivo pdf) en la parte inferior de esta página.


Total 7 Páginas

No Preview Available ! AD8634 Hoja de datos, Descripción, Manual

Preliminary Technical Data
High Temperature, Low Power
Operational Amplifier
AD8634
FEATURES
Extreme high temperature operation
−40°C to +210°C, flatpack package
−40°C to +175°C, SOIC package
Rail-to-rail output
Low power: 1 mA maximum
Gain bandwidth product: 10 MHz at AV = 100 typical
Low offset voltage: 200 μV maximum
Unity-gain stable
High slew rate: 2.5 V/μs typical
Low noise: 4 nV/√Hz typical at 1 kHz
APPLICATIONS
Downhole drilling and instrumentation
Avionics
Heavy industrial
High temperature environments
GENERAL DESCRIPTION
The AD8634 is a single-supply, 10 MHz bandwidth, dual
amplifier that features rail-to-rail outputs. The AD8634 is
guaranteed to operate from 3 V to 30 V (or ±1.5 V to ±15 V)
and at very high temperatures.
The AD8634 is well suited for single-supply applications that
require both ac and precision dc performance. The combination
of wide bandwidth, low noise, and precision makes the AD8634
useful in a wide variety of applications, including filters and
interfacing with a variety of sensors.
This dual-channel op amp is offered in an 8-lead SOIC plastic
package with an operating temperature range of −40°C to +175°C.
It is also available in an 8-lead ceramic flat package (flatpack)
with an operating temperature range of −40°C to +210°C. Both
packages are designed for robustness at extreme temperatures
and are qualified for 1000 hours of operation at the maximum
temperature rating.
PIN CONFIGURATION
OUT A 1
–IN A 2
+IN A 3
V– 4
8 V+
7 OUT B
6 –IN B
5 +IN B
AD8634
TOP VIEW
(Not to Scale)
Figure 1. SOIC and Flatpack Pinout
The AD8634 is a member of a growing series of high temperature
qualified products offered by Analog Devices, Inc. For a complete
selection table of available high temperature products, see the
high temperature product list and qualification data available at
http://www.DataSheet4U.com/
www.analog.com/hightemp.
Rev. PrA
Document Feedback
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarksandregisteredtrademarksarethepropertyoftheirrespectiveowners.
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A.
Tel: 781.329.4700
©2013 Analog Devices, Inc. All rights reserved.
Technical Support
www.analog.com

1 page




AD8634 pdf
Preliminary Technical Data
AD8634
ABSOLUTE MAXIMUM RATINGS
Table 3.
Parameter
Supply Voltage
Input Voltage
Differential Input Voltage1
Output Short-Circuit Duration to GND
Storage Temperature Range
Operating Temperature Range
SOIC Package
Flatpack Package
Junction Temperature
SOIC Package
Flatpack Package
Lead Temperature (Soldering 60 sec)
Rating
±18 V
V− ≤ VIN ≤ V+
±0.6 V
TBD
−65°C to +210°C
−40°C to +175°C
−40°C to +210°C
210°C
210°C
300°C
1 For input differential voltages greater than 0.6 V, the input current should be
limited to less than 5 mA to prevent degradation or destruction of the input
devices.
Stresses above those listed under Absolute Maximum Ratings
may cause permanent damage to the device. This is a stress
rating only; functional operation of the device at these or any
other conditions above those indicated in the operational
section of this specification is not implied. Exposure to absolute
maximum rating conditions for extended periods may affect
device reliability.
THERMAL RESISTANCE
θJA is specified for the device soldered on a 4-layer JEDEC
standard printed circuit board (PCB) with zero airflow.
Table 4. Thermal Resistance
Package Type
θJA θJC Unit
8-Lead SOIC_N
121 43
°C/W
8-Lead Flatpack
TBD TBD °C/W
ESD CAUTION
http://www.DataSheet4U.com/
Rev. PrA | Page 5 of 7

5 Page










PáginasTotal 7 Páginas
PDF Descargar[ Datasheet AD8634.PDF ]




Hoja de datos destacado

Número de piezaDescripciónFabricantes
AD8630Rail-to-Rail Input/Output Operational AmplifierAnalog Devices
Analog Devices
AD86311.8 V/ 5 MHz Rail-to-Rail Low Power Operational AmplifiersAnalog Devices
Analog Devices
AD86321.8 V/ 5 MHz Rail-to-Rail Low Power Operational AmplifiersAnalog Devices
Analog Devices
AD8634Low Power Operational AmplifierAnalog Devices
Analog Devices

Número de piezaDescripciónFabricantes
SLA6805M

High Voltage 3 phase Motor Driver IC.

Sanken
Sanken
SDC1742

12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters.

Analog Devices
Analog Devices


DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares,
permitiéndote verlos en linea o descargarlos en PDF.


DataSheet.es    |   2020   |  Privacy Policy  |  Contacto  |  Buscar