|
|
Número de pieza | CINT1150 | |
Descripción | 150W Single Output Series ITE Power Supply | |
Fabricantes | SL | |
Logotipo | ||
Hay una vista previa y un enlace de descarga de CINT1150 (archivo pdf) en la parte inferior de esta página. Total 2 Páginas | ||
No Preview Available ! 3 Years Warranty
•2” x 4” x 1.3” Package
•For 1U Applications
•150Watts with air & 100Watts Convection Cooled
•Universal Input 90-264 VAC
•Approved to EN/IEC/UL60950-1 2nd Edition
•Power Fail/Output good signal
• Compliant (LVD, RoHS)
•Optional Chassis/Cover
International Safety Agency Approvals
RoHS
CINT1150
150W Single Output Series
ITE Power Supply
Specifications
AC Input
100-240Vac +/- 10%, 47-63 Hz single phase
120-370 Vdc
Input Current
115Vac: 2A, 230Vac: 1A
Inrush Current
264Vac, cold start: will not exceed 50A
Input Fuses
F1, F2: 4A, 250VAC fuses provided on all models
Earth Leakage Current
<750µA@264Vac, 60Hz, NC
Efficiency
88% typical at 115V
Output Power 150W continuous with 200lfm airflow, 100W convection
cooled – See chart for specific voltage model ratings
Transient Response
Ripple and Noise
50% load step. ∆i/∆t <0.2A/µS
Max Volt Deviation = 3%
See chart
Output Voltage
Voltage Adjustability
See chart
+/-5% from nominal
Minimum Load
Not required
Total Regulation
+/- 5%. See chart
Vibration Operating: 0.003g2/Hz, 1.5grms overall, 3 axes, 10 min/axis
Non-Operating: 0.026 g2/Hz, 5.0grms overall, 3 axes, 1 hr/axis
Dimensions
W: 2.0” x L: 4.0” x H: 1.3”. Weight: 183g
All Specifications are typical at nominal input, full load at 25°C unless otherwise stated.
Turn On Time
Hold-up Time
Less than 2 sec. @115Vac (inversely proportional
to input voltage and thermistor temperature)
>12mSec at full load and 120VAC
Signals
AC Power Fail/DC OK
Overload Protection
Hiccup Mode
Short Circuit Protectionwww.DataSheet.net/
No damage to the supply
PFC Switching Frequency
65kHz typical
Overvoltage Protection OVP firing reduces output voltage to <50%
of nominal in <50mS. See chart for trip range
Isolation
Input-Output: 4000Vac
Input-Ground: 1800Vac, Output-Ground: 500Vac
Operating Temperature
-10 to +70°C
Derate output power linearly to 50% at 70°C
Storage Temperature
-40 to +85°C
Operating Altitude
Non-operating Altitude
-500 to 10,000 ft
(approved to 3,000M)
-500 to 40,000 ft
Relative Humidity
5% to 95%, non-condensing
Shock
Operating: Half-sine, 20 gpk, 10 ms, 3 axes, 6 shocks total
Non-Operating: Half-sine, 40 gpk, 10 ms, 3 axes, 6 shocks total
ITE Safety Standards
EN/CSA/UL/IEC 60950-1, 2nd Edition
Model Number Key
CINT 1 150 X 12 06 K 01
M ode l:
Input Connector:
Output Connector:
Output Voltage:
Conf igur at ion:
Output Pow er:
# of Outputs:
Product Fam ily:
"01" = Standard Model, 02 and higher indicates a m odified m odel.
"K" = 3 pin Header, Class I input
"06" = Output Connector - 6 pin Header
"12" = 12Vdc, "24" = 24Vdc, etc.
"A" = First Generation
"150" = 150 Watts Output Pow er
"1" = Single Output
"C" = ITE/Industrial, "I" = Internal, "NT" = New Technology
______________________________________________________________________________________________________________________________ 1 of 2
SL Power Electronics Corp • 6050 King Drive Ventura, CA 93003 • Phone 805.486.4565 • Fax 858.712.2040 • Email: [email protected] • www.slpower.com
Datasheet pdf - http://www.DataSheet4U.co.kr/
1 page |
Páginas | Total 2 Páginas | |
PDF Descargar | [ Datasheet CINT1150.PDF ] |
Número de pieza | Descripción | Fabricantes |
CINT1150 | 150W Single Output Series ITE Power Supply | SL |
Número de pieza | Descripción | Fabricantes |
SLA6805M | High Voltage 3 phase Motor Driver IC. |
Sanken |
SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
Analog Devices |
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |