Datenblatt-pdf.com


CBTL06GP212 Schematic ( PDF Datasheet ) - NXP Semiconductors

Teilenummer CBTL06GP212
Beschreibung High performance DisplayPort switch
Hersteller NXP Semiconductors
Logo NXP Semiconductors Logo 




Gesamt 2 Seiten
CBTL06GP212 Datasheet, Funktion
CBTL06GP212
High performance DisplayPort switch with high
common-mode voltage support
Rev. 1 — 2 May 2012
Product brief
1. General description
The CBTL06GP212 is a six-channel (‘hex’) multiplexer for DisplayPort and PCI Express
applications at Generation 2 (‘Gen2’) speeds. It provides four differential channels
capable of 1 : 2 switching or 2 : 1 multiplexing (bidirectional and AC-coupled) PCI Express
or DisplayPort signals, using high-bandwidth pass-gate technology. It provides support for
high common-mode/bias voltage on the high speed differential channels. Additionally, it
provides for switching/multiplexing of the Hot Plug Detect signal as well as the AUX or
DDC (Direct Display Control) signals, for a total of six channels on the display side. The
AUX and DDC channels provide a four-position multiplexer such that an additional level of
multiplexing can be accomplished when AUX and DDC I/Os are on separate pins of the
display source device.
The CBTL06GP212 is designed for Gen2 speeds, at 5.0 Gbit/s for PCI Express or
5.4 Gbit/s for DisplayPort. It consumes 2 mA current (typical) in operational mode and
provides a shutdown function to support battery-powered applications.
A typical application of CBTL06GP212 is on motherboards where one of two GPU display
sources needs to be selected to connect to a display sink device or connector. A controller
chip selects which path to use by setting a select signal HIGH or LOW. Due to the
non-directional nature of the signal paths (which use high-bandwidth pass gate
www.DataSheet.net/
technology), the CBTL06GP212 can also be used in the reverse topology, e.g., to connect
one display source device to one of two display sink devices or connectors.
2. Features
1 : 2 switching or 2 : 1 multiplexing of DisplayPort RON on DP high-speed channels: 6 Ω
(v1.2 - 5.4 Gbit/s) or PCI Express (v2.0 - 5.0 Gbit/s) Low insertion loss:
signals
0.5 dB at 100 MHz
4 high-speed differential channels with
2 : 1 muxing/switching for DisplayPort or
PCI Express signals
1 channel with 4 : 1 muxing/switching
1.5 dB at 1.35 GHz
2.5 dB at 2.7 GHz
Low crosstalk: 35 dB at 2.7 GHz
Low off-state isolation: 30 dB at 2.7 GHz
for AUX at 1 Mbit/s or DDC signals
Low return loss: 8 dB at 2.7 GHz
1 channel with 2 : 1 muxing/switching
Very low intra-pair skew (5 ps typical)
for single-ended HPD signal
Very low inter-pair skew (< 80 ps)
High-bandwidth analog pass-gate technology
3 dB bandwidth at 5 GHz
Supports a wide range of common-mode/bias
Switch/multiplexer position select CMOS input
voltage on high speed differential channels
Shutdown mode CMOS input
Supports high-speed signal switching over a wide Supports backdrive protection
common-mode range and differential swing
Single 3.3 V power supply
Datasheet pdf - http://www.DataSheet4U.co.kr/





SeitenGesamt 2 Seiten
PDF Download[ CBTL06GP212 Schematic.PDF ]

Link teilen




Besondere Datenblatt

TeilenummerBeschreibungHersteller
CBTL06GP212High performance DisplayPort switchNXP Semiconductors
NXP Semiconductors

TeilenummerBeschreibungHersteller
CD40175BC

Hex D-Type Flip-Flop / Quad D-Type Flip-Flop.

Fairchild Semiconductor
Fairchild Semiconductor
KTD1146

EPITAXIAL PLANAR NPN TRANSISTOR.

KEC
KEC


www.Datenblatt-PDF.com       |      2020       |      Kontakt     |      Suche