|
|
Número de pieza | A102VW01 | |
Descripción | LCD Module | |
Fabricantes | AUO | |
Logotipo | ||
Hay una vista previa y un enlace de descarga de A102VW01 (archivo pdf) en la parte inferior de esta página. Total 21 Páginas | ||
No Preview Available ! www.DataSheet4U.net
Specifications Approval Sheet
Product Description: 10.2” COLOR TFT-LCD MODULE
AU Model Name: A102VW01
Customer Part No:
Customer Signature
Date AU
Approved By:
Reviewed By:
Prepared By:
2004/12/16
Please return one copy with your signature and comments for our
confirmation.
AU Optronics Corporation
Tel: +886-3-563-2899
Fax: +886-3-564-5785
* No Reproduction and Redistribution Allowed
1 page www.DataSheet4U.net
Appendix:
Fig.1 Outline dimension of TFT-LCD module (Front Side)
Fig.2 Outline dimension of TFT-LCD module (Rear Side)
Fig.3 Operation Mode 1
Fig.4 Operation Mode 2
Fig.5 Horizontal timing
Fig.6 Vertical shift timing
Fig.7 Vertical timing (from up to down)
Version
Page
:5
: 2 /18
P12
P13
P14
P15
P16
P17
P18
ALL RIGHTS STRICTLY RESERVED. ANY PORTION OF THIS PAPER SHALL NOT BE REPRODUCED, COPIED,
OR TRANSFORMED TO ANY OTHER FORMS WITHOUT PERMISSION FROM AU OPTRONICS CORP.
5 Page www.DataSheet4U.net
C. Optical specification (Note 1, Note 2)
Item
Symbol Condition
Response time Rise
Fall
Tr
Tf
=0
Min.
-
-
Version
Page
Typ.
12
18
Max.
24
36
:5
: 8 /18
Unit
ms
ms
Remark
Note 3,5
Contrast ratio
CR
Viewing angle
Top
Bottom
Left
Right
At optimized
Viewing angle
CR 10
250
40
55
55
55
400
45
65
65
65
-
-
-
-
-
Note 4, 5
Note 5, 6
deg
Brightness
YL IL=6mA, 25
350 400
-
nit Note 7
White chromaticity
X
Y
=0 0.26 0.29 0.34
=0 0.28 0.32 0.36
Note 7
Note 1 : Ambient temperature =25 , and lamp current IL = 6 mArms. To be measured in the dark
room. DC/AC inverter driving frequency: 60 kHz.
Note 2 :To be measured on the center area of panel with a viewing cone of 1 by Topcon
luminance meter BM-5, after 10 minutes operation.
Note 3. Definition of response time:
The output signals of photo detector are measured when the input signals are changed
from “black” to “white”(falling time) and from “white” to “black”(rising time), respectively.
The response time is defined as the time interval between the 10% and 90% of
amplitudes. Refer to figure as below.
"White"
100%
90%
"Black"
"White"
10%
0%
Tr
Tf
Note 4. Definition of contrast ratio:
Contrast ratio is calculated with the following formula.
Photo detector output when LCD is at “White” state
Contrast ratio (CR)= Photo detector output when LCD is at “Black” state
ALL RIGHTS STRICTLY RESERVED. ANY PORTION OF THIS PAPER SHALL NOT BE REPRODUCED, COPIED,
OR TRANSFORMED TO ANY OTHER FORMS WITHOUT PERMISSION FROM AU OPTRONICS CORP.
11 Page |
Páginas | Total 21 Páginas | |
PDF Descargar | [ Datasheet A102VW01.PDF ] |
Número de pieza | Descripción | Fabricantes |
A102VW01 | LCD Module | AUO |
A102VW01-V1 | TFT LCD Module | AUO |
A102VW01-V7 | TFT LCD Module | AUO |
A102VW01-V8 | TFT LCD Module | AUO |
Número de pieza | Descripción | Fabricantes |
SLA6805M | High Voltage 3 phase Motor Driver IC. |
Sanken |
SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
Analog Devices |
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |