ADP194 Datasheet PDF - Analog Devices
| Part Number | ADP194 | |
| Description | High-Side Power Switch | |
| Manufacturers | Analog Devices | |
| Logo |  |
|
|
There is a preview and ADP194 download ( pdf file ) link at the bottom of this page. Total 12 Pages | ||
Preview 1 page No Preview Available !
www.DataSheet4U.net
FEATURES
Low RDSON of 80 mΩ at 1.8 V
Low input voltage range: 1.1 V to 3.6 V
500 mA continuous operating current
Built-in level shift for control logic that can be operated
by 1.2 V logic
Low 2 μA (maximum) ground current
Ultralow shutdown current <0.7 μA
Reverse current blocking
Ultrasmall 0.8 mm × 0.8 mm × 0.5mm, 4-ball, 0.4 mm
pitch WLCSP
APPLICATIONS
Mobile phones
Digital cameras and audio devices
Portable and battery-powered equipment
GENERAL DESCRIPTION
The ADP194 is a high-side load switch designed for operation
from 1.1 V to 3.6 V and is protected against reverse current flow
from output to input. This load switch provides power domain
isolation for extended power battery life. The device contains a
low on-resistance P-channel MOSFET that supports more than
500 mA of continuous load current and minimizes power loss.
The low 2 μA (maximum) ground current and ultralow shut-
down current make the ADP194 ideal for battery-operated
Logic Controlled,
High-Side Power Switch
ADP194
TYPICAL APPLICATIONS CIRCUIT
ADP194
VIN
+
– GND
REVERSE
POLARITY
PROTECTION
VOUT
EN
ON
OFF
LEVEL SHIFT
AND SLEW
RATE CONTROL
LOAD
Figure 1.
portable equipment. The built-in level shifter in the enable logic
input makes the ADP194 compatible with modern processors
and GPIO controllers.
Beyond operating performance, the ADP194 occupies minimal
printed circuit board (PCB) space with an area of less than
0.64 mm2 and a height of 0.50 mm. The ADP194 is available in
an ultrasmall 0.8 mm × 0.8 mm, 4-ball, 0.4 mm pitch WLCSP.
Rev. 0
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarksandregisteredtrademarksarethepropertyoftheirrespectiveowners.
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A.
Tel: 781.329.4700
www.analog.com
Fax: 781.461.3113
©2011 Analog Devices, Inc. All rights reserved.
|
| |
 
PIN CONFIGURATION AND FUNCTION DESCRIPTIONS
12
A VIN
VOUT
TOP VIEW
(Not to Scale)
B EN
GND
Figure 3. Pin Configuration
ADP194
Table 4. Pin Function Descriptions
Pin No.
Mnemonic
Description
A1 VIN
Input Voltage.
B1 EN
Enable Input. Drive EN high to turn on the switch; drive EN low to turn off the switch.
A2 VOUT
Output Voltage.
B2 GND
Ground.
Rev. 0 | Page 5 of 12
Preview 5 Page |
Part DetailsOn this page, you can learn information such as the schematic, equivalent, pinout, replacement, circuit, and manual for ADP194 electronic component. |
| Information | Total 12 Pages | |
| Link URL | [ Copy URL to Clipboard ] | |
| Download | [ ADP194.PDF Datasheet ] | |
Share Link :
Electronic Components Distributor
|
An electronic components distributor is a company that sources, stocks, and sells electronic components to manufacturers, engineers, and hobbyists. |
| SparkFun Electronics | Allied Electronics | DigiKey Electronics | Arrow Electronics |
| Mouser Electronics | Adafruit | Newark | Chip One Stop |
Featured Datasheets
| Part Number | Description | MFRS |
| ADP190 | The function is High-Side Power Switch. Analog Devices | |
| ADP191 | The function is High-Side Power Switch. Analog Devices | |
| ADP194 | The function is High-Side Power Switch. Analog Devices | |
Semiconductors commonly used in industry:
1N4148 |
BAW56 |
1N5400 |
NE555 | | ||
Quick jump to:
ADP1
1N4
2N2
2SA
2SC
74H
BC
HCF
IRF
KA | ||