|
|
PDF ADA4096-2 Data sheet ( Hoja de datos )
| Número de pieza | ADA4096-2 | |
| Descripción | Rail-to-Rail I/O Amplifiers | |
| Fabricantes | Analog Devices | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de ADA4096-2 (archivo pdf) en la parte inferior de esta página. Total 5 Páginas | ||
|
No Preview Available !
www.DataSheet4U.net
36V, Micropower, Overvoltage Protection,
Rail-to-Rail I/O Amplifiers
Preliminary Technical Data
ADA4096-2
FEATURES
32V Input Overvoltage Protection above/below the
supply rails
Rail-to-Rail Input and Output Swing
Low Power: 60 A/Amplifier typ
Unity Gain Bandwidth:
800 kHz typ @ Vsy = ±15 V
550 kHz typ @ Vsy = ±5 V
475 kHz typ @ Vsy = ±1.5 V
Single-Supply Operation: 3 V to 30 V
Low Offset Voltage: 250 V max
High Open-Loop Gain: 120 dB typ
Unity-Gain Stable
No Phase Reversal
PIN CONFIGURATIONS
Figure 1. 8-LeadLFCSP (2x2) Figure 2. 8-Lead MSOP (RM)
APPLICATIONS
Battery Monitoring
Sensor Conditioners
Portable Power Supply Control
Portable Instrumentation
GENERAL DESCRIPTION
The ADA4096 family of operational amplifier features micro-
power operation and rail-to-rail input and output ranges. The
extremely low power requirements and guaranteed operation
from 3 V to 30 V (±1.5 V to ±15 V) make these amplifiers
perfectly suited to monitor battery usage and to control battery
charging. Their dynamic performance, including 27 nV/√Hz
voltage noise density, recommends them for battery-powered
audio applications. The amplifier can drive capacitive loads up
to 200 pF without oscillation.
The ADA4096 has overvoltage protection inputs that allow the
voltage input to exceed 32V above and below the supply rails
without damage, glitching, or phase reversal, making the device
ideal for robust industrial applications.
The ADA4096 are specified over the extended industrial
(–40°C to +125°C) temperature range. The dual ADA4096-2 is
available in 8-lead LFCSP (2x2) and 8-lead MSOP packages.
Rev. PrB
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice.
No license is granted by implication or otherwise under any patent or patent rights of Analog
Devices.Trademarksandregisteredtrademarksarethepropertyoftheirrespectiveowners.
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A.
Tel: 781.329.4700
www.analog.com
Fax: 781.461.3113
©2011 Analog Devices, Inc. All rights reserved.
1 page  
Preliminary Technical Data
ABSOLUTE MAXIMUM RATINGS
Table 4.
Parameter
Supply Voltage
Input Voltage
Operating Conditions
Overvoltage Condition1
Differential Input Voltage
Output Short-Circuit Duration to
Gnd
Storage Temperature Range
Operating Temperature Range
Junction Temperature Range
Lead Temperature (Soldering, 60
sec)
Rating
36 V
V- ≤Vin≤ V+
V- – 32V ≤Vin≤ V+ + 32V
±Vsy
Indefinite
−65°C to +150°C
−40°C to +125°C
−65°C to +150°C
300°C
1 Performance specifications are not guaranteed during overvoltage
conditions.
Stresses above those listed under Absolute Maximum Ratings
may cause permanent damage to the device. This is a stress
rating only; functional operation of the device at these or any
other conditions above those indicated in the operational
section of this specification is not implied. Exposure to absolute
maximum rating conditions for extended periods may affect
device reliability.
ADA4096
THERMAL RESISTANCE
θJA is specified for the worst-case conditions, that is, a device
soldered in a circuit board for surface-mount packages.
Table 5. Thermal Resistance
Package Type
θJA θJC Unit
ESD CAUTION
©2011 Analog Devices, Inc. All rights reserved. Trademarks and
registered trademarks are the property of their respective owners.
PR09241-0-5/11(PrB)
Rev. PrB | Page 5 of 5
5 Page | ||
| Páginas | Total 5 Páginas | |
| PDF Descargar | [ Datasheet ADA4096-2.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| ADA4096-2 | Rail-to-Rail I/O Amplifiers | Analog Devices |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |