Datenblatt-pdf.com


GP1FAV51RK0F Schematic ( PDF Datasheet ) - Sharp Electrionic Components

Teilenummer GP1FAV51RK0F
Beschreibung Fiber Optic Receiver Square connector
Hersteller Sharp Electrionic Components
Logo Sharp Electrionic Components Logo 




Gesamt 9 Seiten
GP1FAV51RK0F Datasheet, Funktion
GP1FAV51RK0F
GP1FAV51RK0F
Fiber Optic Receiver
Square connector
With mounting hole
With shutter
Description
GP1FAV51RK0F employs an OPIC device that
integrates a photodiode and signal processing
circuit onto a single chip, and the output is
at TTL levels.
Features
1. Fiber optic receiver
(Transmitter : GP1FAV51TK0F)
2. Square connector (JEITA RC-5720B)
3. With mounting hole
4. With shutter function
5. Supply voltage : 5 V
6. Transfer rate : 13.2 Mb/s
Agency approvals/Compliance
1. Compliant with JEITA RC-5720B and CP1201
2. Compliant with RoHS directive (2002/95/EC)
Applications
AV equipment
(DVD, CD, MD players etc.)
www.DataSheet4U.com
Notice The content of data sheet is subject to change without prior notice.
In the absence of confirmation by device specification sheets, SHARP takes no responsibility for any defects that may occur in equipment using any SHARP
devices shown in catalogs, data books, etc. Contact SHARP in order to obtain the latest device specification sheets before using any SHARP device.
Sheet No.: E2-A01301EN
Date Dec.01.2006
©SHARP Corporation
1






GP1FAV51RK0F Datasheet, Funktion
Fig. 4 Pulse Response and Jitter
Fiber optic cable
Standard transmitter
Vin VCC
GND
5V
Input
Input signal
6.6 Mb/s bi-phase PRBS signal
CH1
CH2
GP1FAV51RK0F
GP1FAV51RK0F Device under test
VCC GND
VCC
Rso Vout
Rsi
Tektronix 7834 or 7934 type Oscilloscope
Trigger ; CH1
Mode ; Storage mode
Sweep ; AUTO/NORM
Fig. 5 Input Signal (6.6 Mb/s Bi-phase PRBS Signal)
Input signal
GP1FAV51RK0F output
50%
50%
Δtj Δtj
Notes
(1) The fiber coupling light output set at –14.5 dBm or –24.0 dBm.
(2) Rsi, Rso: Standard load resistor (Rsi: 3.3 kΩ, Rso: 2.2 kΩ)
(3) Set the oscilloscope to the storage mode and write time to 3 seconds.
www.DDatoaSnohteaeltl4oUw.cthoembrightness to be increased too much. The waveform would be distorted.
(4) VCC = 5.0 V (State of operating)
(5) The probe for the oscilloscope must be more than 1 MΩ and less than 10 pF.
6
Sheet No.: E2-A01301EN

6 Page







SeitenGesamt 9 Seiten
PDF Download[ GP1FAV51RK0F Schematic.PDF ]

Link teilen




Besondere Datenblatt

TeilenummerBeschreibungHersteller
GP1FAV51RK0FFiber Optic Receiver Square connectorSharp Electrionic Components
Sharp Electrionic Components

TeilenummerBeschreibungHersteller
CD40175BC

Hex D-Type Flip-Flop / Quad D-Type Flip-Flop.

Fairchild Semiconductor
Fairchild Semiconductor
KTD1146

EPITAXIAL PLANAR NPN TRANSISTOR.

KEC
KEC


www.Datenblatt-PDF.com       |      2020       |      Kontakt     |      Suche