|
|
Teilenummer | PCS3P2537A |
|
Beschreibung | Low Power Peak EMI Reduction IC | |
Hersteller | PulseCore Semiconductor | |
Logo | ||
Gesamt 7 Seiten February 2008
rev 0.2
PCS3P2537A
Low Power Peak EMI Reduction IC
Features
• 1x Peak EMI Reduction IC
• Input Frequency: 18MHz-36MHz
• Output Frequency: 18MHz-36MHz
• Frequency Deviation @ 27MHz : -0.25%
• Modulation Rate @ 27MHz : 30.1KHz
• Supply Voltage: 3.3V±0.3V
• Operating current less than 8mA @ 27MHz.
• Spread Spectrum Enable Control.
• Low power CMOS design.
• 8 pin TDFN (2X2) COL package.
• Commercial temperature
Product Description
PCS3P2537A modulates the output of wa wswing.DleatPaSLhLeeint4U.com
order to “spread” the bandwidth of a synthesized clock,
and more importantly, decreases the peak amplitudes of
its harmonics. This results in significantly lower system
EMI compared to the typical narrow band signal produced
by oscillators and most frequency generators. Lowering
EMI by increasing a signal’s bandwidth is called ‘spread
spectrum clock generation’.
PCS3P2537A has a frequency range of 18MHz-36MHz,
and accepts input clock either from a Crystal or from an
external reference and locks on to it delivering a 1x
spread spectrum clock output. It has an SSON control for
enabling and disabling Spread Spectrum function.
PCS3P2537A is a versatile Low Power, 1x spread
spectrum frequency modulator designed to reduce
electromagnetic interference (EMI) at the clock source,
allowing system wide reduction of EMI of down stream
clock and data dependent signals. The device allows
significant system cost savings by reducing the number of
circuit board layers ferrite beads, shielding and other
passive components that are traditionally required to pass
EMI regulations.
PCS3P2537A operates with a supply voltage of 3.3V,
and is available in 8L TDFN(2X2) COL package over
commercial temperature.
Application
PCS3P2537A is targeted towards PC peripheral devices
and embedded systems.
Block Diagram
VDD
SSON
CLKIN / XIN
XOUT
Crystal
Oscillator
PLL
ModOUT
GND
PulseCore Semiconductor Corporation
1715 S. Bascom Ave Suite 200, Campbell, CA 95008 • Tel: 408-879-9077 • Fax: 408-879-9018
www.pulsecoresemi.com
Notice: The information in this document is subject to change without notice.
February 2008
rev 0.2
Ordering Codes
Part Number
PCS3P2537AG -08-CR
LL = 2 Character LOT #
PCS3P2537A
Marking
AM1LL
Package
8- pin 2-mm TDFN COL - TAPE & REEL, Green
Temwpwewra.tDuarteaSheet4U.com
Commercial
Device Ordering Information
PCS3P2537AG-08CR
R = Tape & Reel, T = Tube or Tray
O = TSOT23
S = SOIC
T = TSSOP
A = SSOP
V = TVSOP
B = BGA
Q = QFN
U = MSOP
E = TQFP
L = LQFP
U = MSOP
P = PDIP
D = QSOP
X = SC-70
DEVICE PIN COUNT
J=TSOT26
C=TDFN (2X2) COL
F = LEAD FREE AND RoHS COMPLIANT PART
G = GREEN PACKAGE
PART NUMBER
X= Automotive I= Industrial P or n/c = Commercial
(-40C to +125C) (-40C to +85C)
(0C to +70C)
1 = Reserved
2 = Non PLL based
3 = EMI Reduction
4 = DDR support products
5 = STD Zero Delay Buffer
6 = Power Management
7 = Power Management
8 = Power Management
9 = Hi Performance
0 = Reserved
PulseCore Semiconductor Mixed Signal Product
Licensed under US patent #5,488,627, #6,646,463 and #5,631,920.
Low Power Peak EMI Reduction IC
Notice: The information in this document is subject to change without notice.
6 of 7
6 Page | ||
Seiten | Gesamt 7 Seiten | |
PDF Download | [ PCS3P2537A Schematic.PDF ] |
Teilenummer | Beschreibung | Hersteller |
PCS3P2537A | Low Power Peak EMI Reduction IC | PulseCore Semiconductor |
PCS3P2537A | Peak EMI Reduction IC | ON Semiconductor |
Teilenummer | Beschreibung | Hersteller |
CD40175BC | Hex D-Type Flip-Flop / Quad D-Type Flip-Flop. |
Fairchild Semiconductor |
KTD1146 | EPITAXIAL PLANAR NPN TRANSISTOR. |
KEC |
www.Datenblatt-PDF.com | 2020 | Kontakt | Suche |