EL5111T Datasheet PDF - Intersil Corporation
| Part Number | EL5111T | |
| Description | 60MHz Rail-to-Rail Input-Output Operational Amplifier | |
| Manufacturers | Intersil Corporation | |
| Logo |  |
|
|
There is a preview and EL5111T download ( pdf file ) link at the bottom of this page. Total 14 Pages | ||
Preview 1 page No Preview Available !
60MHz Rail-to-Rail Input-Output Operational Amplifier
EL5111T
The EL5111T is a high voltage rail-to-rail input-output
amplifier with low power consumption. The EL5111T is a
single amplifier which exhibits beyond the rail input
capability, rail-to-rail output capability, and is unity gain
stable.
The maximum operating voltage range is from 4.5V to
19V. It can be configured for single or dual supply
operation, and typically consumes only 3mA. The
EL5111T has an output short circuit capability of
±300mA and a continuous output current capability of
±70mA.
The EL5111T features a high slew rate of 100V/μs, and
fast settling time. Also, the device provides common
mode input capability beyond the supply rails, rail-to-rail
output capability, and a bandwidth of 60MHz (-3dB). This
enables the amplifier to offer maximum dynamic range
at any supply voltage. These features make the EL5111T
an ideal amplifier solution for use in TFT-LCD panels as a
VCOM driver or static gamma buffer, and in high speed
filtering and signal conditioning applications. Other
applications include battery power and portable devices,
especially where low power consumption is important.
The EL5111T is available in small 5 Ld TSOT package. It
features a standard operational amplifier pinout. The
device operates over an ambient temperature range of
-40°C to +85°C.
Features
• 60MHz (-3dB) Bandwidth
• 4.5V to 19V Maximum Supply Voltage Range
• 100V/μs Slew Rate
• 3mA Supply Current
• ±70mA Continuous Output Current
• ±300mA Output Short Circuit Current
• Unity-gain Stable
• Beyond the Rails Input Capability
• Rail-to-rail Output Swing
• Built-in Thermal Protection
• -40°C to +85°C Ambient Temperature Range
• Pb-Free (RoHS Compliant)
Applications*(see page 13)
• TFT-LCD Panels
• VCOM Amplifiers
• Static Gamma Buffers
• Drivers for A/D Converters
• Data Acquisition
• Video Processing
• Audio Processing
• Active Filters
• Test Equipment
• Battery-powered Applications
• Portable Equipment
FIGURE 1. TYPICAL TFT-LCD VCOM APPLICATION
10
8
VS = ±5V
AV = 1
6
CL = 1.5pF
RL || 1kΩ (PROBE)
4
2
1kΩ
0
-2
-4
-6
-8
-10
100k
560Ω
150Ω
1M 10M
FREQUENCY (Hz)
100M
FIGURE 2. FREQUENCY RESPONSE FOR VARIOUS RL
May 27, 2010
FN6894.0
www.DataSheet.in
1 CAUTION: These devices are sensitive to electrostatic discharge; follow proper IC Handling Procedures.
1-888-INTERSIL or 1-888-468-3774 | Intersil (and design) is a registered trademark of Intersil Americas Inc.
Copyright Intersil Americas Inc. 2010. All Rights Reserved
All other trademarks mentioned are the property of their respective owners.
|
| |
 
EL5111T
Electrical Specifications VS+ = +18V, VS- = 0V, RL = 1kΩ to 9V, TA = +25°C, Unless Otherwise Specified. (Continued)
PARAMETER
DESCRIPTION
CONDITION
MIN TYP MAX UNIT
OUTPUT CHARACTERISTICS
VOL
VOH
ISC
Output Swing Low
Output Swing High
Short-circuit Current
IOUT
Output Current
POWER SUPPLY PERFORMANCE
IL = -6mA
IL = +6mA
VCM = 9V, Source: VOUT short to VS-,
Sink: VOUT short to VS+
90
17.85 17.91
±300
±70
150
mV
V
mA
mA
(VS+) - (VS-) Supply Voltage Range
IS Supply Current
PSRR
Power Supply Rejection Ratio
VCM = 9V, No load
Supply is moved from 4.5V to 19V
4.5 19 V
3.4 4 mA
60 75
dB
DYNAMIC PERFORMANCE
SR Slew Rate (Note 7)
1V ≤ VOUTx ≤ 17V, 20% to 80%
100 V/μs
tS Settling to +0.1% (Note 8)
AV = +1, VOUT = 2V step,
RL = 1kΩ || 1kΩ (probe), CL = 1.5pF
100 ns
BW -3dB Bandwidth
RL = 1kΩ, CL = 1.5pF
60 MHz
GBWP
Gain-Bandwidth Product
AV = -10, RF = 1kΩ, RG = 100Ω
RL = 1kΩ || 1kΩ (probe), CL = 1.5pF
32 MHz
PM Phase Margin
AV = -10, RF = 1kΩ, RG = 100Ω
RL = 1kΩ || 1kΩ (probe), CL = 1.5pF
50 °
NOTES:
6. Measured over -40°C to +85°C ambient operating temperature range. See the typical TCVOS production distribution shown in
the “Typical Performance Curves” on page 6.
7. Typical slew rate is an average of the slew rates measured on the rising (20% to 80%) and the falling (80% to 20%) edges
of the output signal.
8. Settling time measured as the time from when the output level crosses the final value on rising/falling edge to when the output
level settles within a ±0.1% error band. The range of the error band is determined by: Final Value(V)±[Full Scale(V)*0.1%].
www.DataSheet.in
5
FN6894.0
May 27, 2010
Preview 5 Page |
Part DetailsOn this page, you can learn information such as the schematic, equivalent, pinout, replacement, circuit, and manual for EL5111T electronic component. |
| Information | Total 14 Pages | |
| Link URL | [ Copy URL to Clipboard ] | |
| Download | [ EL5111T.PDF Datasheet ] | |
Share Link :
Electronic Components Distributor
|
An electronic components distributor is a company that sources, stocks, and sells electronic components to manufacturers, engineers, and hobbyists. |
| SparkFun Electronics | Allied Electronics | DigiKey Electronics | Arrow Electronics |
| Mouser Electronics | Adafruit | Newark | Chip One Stop |
Featured Datasheets
| Part Number | Description | MFRS |
| EL5111 | The function is (EL5111 - EL5411) 60MHz Rail-to-Rail Input-Output Op Amps. Intersil Corporation | |
| EL5111T | The function is 60MHz Rail-to-Rail Input-Output Operational Amplifier. Intersil Corporation | |
Semiconductors commonly used in industry:
1N4148 |
BAW56 |
1N5400 |
NE555 | | ||
Quick jump to:
EL51
1N4
2N2
2SA
2SC
74H
BC
HCF
IRF
KA | ||