|
|
Número de pieza | E2K-C | |
Descripción | Long-distance capacitive proximity sensor | |
Fabricantes | Omron Electronics | |
Logotipo | ||
Hay una vista previa y un enlace de descarga de E2K-C (archivo pdf) en la parte inferior de esta página. Total 6 Páginas | ||
No Preview Available ! Long-distance capacitive proximity sensor
E2K-C
Capacitive Proximity Sensor
with Adjustable Sensitivity
● Detects both metallic and non-metallic objects
(glass, lumber, water, oil, plastic, etc.) without
direct contact.
● DC models acquire CE marking
www.DataSheet4U.com
Ordering Information
Sensors
Shape
Unshielded
34 dia.
Sensing distance
3 to 25mm
Output specifications
DC 3-wire NPN
DC 3-wire PNP
AC 2-wire Models
Accessories (Order Separately)
Mounting Brackets
Shape
Model
Quantity
Remarks
Y92E-A34
1 Supplied with the product.
Model
Operating status
NO
E2K-C25ME1
E2-KC25MF1
NC
E2K-C25ME2
E2K-C25MF2
E2K-C25MY1
E2K-C25MY2
E-74
Proximity Sensors
1 page Operation
Sensitivity adjustment
Remove the rear rubber cap of the E2K-C and turn the poten-
tiometer in the hole to adjust the sensitivity of the E2K-C.
Remove this rubber
cap and adjust the
potentiometer.
The sensing distance increases by turning the potentiometer
clockwise and decreases by turning the potentiometer coun-
terclockwise. The potentiometer can make 15±3 valid turns
and then make slip turns because the potentiometer does not
have a stopper. The slip turns will not, however, damage the
potentiometer.
1. Slowly turn the potentiometer clockwise until the E2K-C
turns on with no sensing object.
Potentiometer
Stop turning the potentiometer
at the moment the E2K-C turns off.
Precautions
Correct Use
Design
Effects of Surrounding Metal
During Proximity Sensor installation provide a distance of 80
mm min. from the surrounding metal objects to prevent the
Sensor from being affected by metal objects other than the
sensing object.
If installing the Sensor with the L-shaped mounting bracket,
provide a distance of 20 mm min. between the face of the
sensing head and the mounting bracket.
20 mm min. 80 mm min.
80 mm
min.
www.DataSheet4U.com
2. Turn the potentiometer counterclockwise until the E2K-C
turns off with the sensing object located within the sensing
distance.
Potentiometer
Stop turning the potentiometer
at the moment the E2K-C turns off.
3. The E2K-C will be in stable operation if there is a difference
of 1.5 turns or more between the points the E2K-C is turned
on and off, otherwise the E2K-C will not be in stable oper-
ation.
The point the
E2K-C turns on.
Stable detection if the
difference is 1.5 turns or more.
The point the
E2K-C turns off.
4. Set the potentiometer midway between the two points.
The point the
E2K-C turns on.
Midway
The point the
E2K-C turns off.
5. If the distance of each sensing object varies, take step 2
with the sensing object located at the farthest sensing dis-
tance to be applied.
Mutual Interference
Space the two Sensors at a distance exceeding 100 mm to
prevent mutual interference.
Face-to-dace Mounting
Parallel Mounting
100 mm min.
100 mm min.
Effect of High-frequency Electro-magnetic Field
The E2K-C may malfunction if there is an ultrasonic washer,
high-frequency generator, transceiver, or inverter nearby.
Be sure to ground
Metal
80 mm min. 80 mm min.
E-78
Proximity Sensors
5 Page |
Páginas | Total 6 Páginas | |
PDF Descargar | [ Datasheet E2K-C.PDF ] |
Número de pieza | Descripción | Fabricantes |
E2K-C | Long-distance capacitive proximity sensor | Omron Electronics |
E2K-L | Liquid Level Sensor | Omron Electronics |
E2K-X | Cylindrical Proximity Sensor | Omron |
E2K-X15ME1 | Cylindrical Proximity Sensor | Omron |
Número de pieza | Descripción | Fabricantes |
SLA6805M | High Voltage 3 phase Motor Driver IC. |
Sanken |
SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
Analog Devices |
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |